Re: [Linphone-users] Port issue

[Laurent Caumont]

Thanks Christopher !
Yeah I finally make it works!
I selected SIP(UDP) but the important thing is to restart linphone
because it complains the first time it's set. (use menu: Options/Quit)
Perhaps, that should be set as the default setting.
Regards,
Laurent
Le ven. 7 sept. 2018 à 00:39, Christopher Woods
<address@hidden> a écrit :
>
> I did some more reading and it seems a similar problem happened a while ago 
> where ipv4 and v6 functionality on older kernels was buggy, it caused 
> problems with 32-bit ipaddrinfo and snmptrapd.
>
> That made me wonder if this Linphone problem is a bug related to initialising 
> IPv4, I then found this:
>
> https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=743494#20
>
> It may be an exosip bug concerning protocol versions? You may have to patch 
> it.
>
> Make sure you're using "SIP (UDP)" globally and TLS is disabled everywhere, 
> for testing.
>
> On Thu, 6 Sep 2018, 21:57 Laurent Caumont, <address@hidden> wrote:
>>
>> Thank you Christopher but I already saw this thread but that didn't help.
>> I also tried to start linphone as root with sudo but that doesn't
>> change the behavior.
>>
>> It seems that the port is correctly detected by nmap.
>> address@hidden:~ $ nmap -p 5061 sip.linphone.org
>>
>> Starting Nmap 7.40 ( https://nmap.org ) at 2018-09-06 22:50 CEST
>> Nmap scan report for sip.linphone.org (91.121.209.194)
>> Host is up (0.048s latency).
>> rDNS record for 91.121.209.194: sip1.linphone.org
>> PORT     STATE SERVICE
>> 5061/tcp open  sip-tls
>>
>> Nmap done: 1 IP address (1 host up) scanned in 0.46 seconds
>>
>>
>> Regards,
>> Laurent
>> Le jeu. 6 sept. 2018 à 11:34, Christopher Woods
>> <address@hidden> a écrit :
>> >
>> > This seems like it may be an old bug, try:
>> >
>> > usermod -aG plugdev lolo
>> >
>> > Then log out and log back in.
>> >
>> > https://askubuntu.com/questions/866453/linphone-could-not-start-tls-transport-on-port-5060-maybe-this-port-is-already
>> >
>> > Regards
>> > Chris
>> >
>> > On Thu, 6 Sep 2018, 07:53 Laurent Caumont, <address@hidden> wrote:
>> >>
>> >> Hi,
>> >>
>> >>
>> >> I tried several options (TCP, stun...) without success. It always 
>> >> complain about the port number.
>> >> With IPv6 option, it doesn't complain but is not able to register.
>> >> I also opened port 5061 on my internet provider box and set it in 
>> >> linphone. No success.
>> >>
>> >> On my local netdb.h file, -9 is
>> >> EAI_ADDRFAMILY The specified network host does not have any network 
>> >> addresses in the requested address family.
>> >>
>> >> What does that mean?
>> >>
>> >> Regards
>> >>
>> >>
>> >> Le jeu. 6 sept. 2018 01:59, Aymeric Moizard <address@hidden> a écrit :
>> >>>
>> >>> Hi!
>> >>>
>> >>> You should check the meaning of the return code for getaddrinfo which is 
>> >>> "-9".
>> >>>
>> >>> This will tell you why it fails or at least will help you to make 
>> >>> progress on a fix.
>> >>>
>> >>> Aymeric
>> >>>
>> >>> Le mer. 5 sept. 2018 à 22:19, Laurent Caumont <address@hidden> a écrit :
>> >>>>
>> >>>> Hello,
>> >>>>
>> >>>> I'm trying to make linphone work on my Linux computers.
>> >>>> I tried on my raspberry pi 3 and on my ubuntu laptop.
>> >>>> Both report that the port 5060 can't be used.
>> >>>> I tried several other values without success.
>> >>>> I'm using the 3.6.1 version.
>> >>>>
>> >>>> It works fine on my android on the same network.
>> >>>> Any idea how to fix that ?
>> >>>>
>> >>>> Thanks
>> >>>> Regards,
>> >>>> Laurent
>> >>>>
>> >>>> address@hidden:~ $ uname -a
>> >>>> Linux raspberrypi 4.14.62-v7+ #1134 SMP Tue Aug 14 17:10:10 BST 2018 
>> >>>> armv7l GNU/Linux
>> >>>>
>> >>>> address@hidden:~$ uname -a
>> >>>> Linux lolo-1025C 4.15.0-33-generic #36-Ubuntu SMP Wed Aug 15 13:44:35 
>> >>>> UTC 2018 i686 i686 i686 GNU/Linux
>> >>>>
>> >>>>
>> >>>> here is the log:
>> >>>> message: Using (r/w) config information from .linphonerc
>> >>>> message: Initializing LinphoneCore 3.6.1
>> >>>> message: oRTP-0.22.0 initialized.
>> >>>> message: assigning PCMU/8000 payload type number 0
>> >>>> message: assigning GSM/8000 payload type number 3
>> >>>> message: assigning PCMA/8000 payload type number 8
>> >>>> message: assigning speex/8000 payload type number 110
>> >>>> message: assigning speex/16000 payload type number 111
>> >>>> message: assigning speex/32000 payload type number 112
>> >>>> message: assigning telephone-event/8000 payload type number 101
>> >>>> message: assigning G722/8000 payload type number 9
>> >>>> message: assigning H263/90000 payload type number 34
>> >>>> message: assigning theora/90000 payload type number 97
>> >>>> message: assigning H263-1998/90000 payload type number 98
>> >>>> message: assigning MP4V-ES/90000 payload type number 99
>> >>>> message: assigning H264/90000 payload type number 102
>> >>>> message: assigning VP8/90000 payload type number 103
>> >>>> message: assigning x-snow/90000 payload type number 96
>> >>>> message: assigning iLBC/8000 payload type number 100
>> >>>> message: assigning AMR/8000 payload type number 104
>> >>>> message: assigning AMR-WB/16000 payload type number 105
>> >>>> message: assigning 1015/8000 payload type number 106
>> >>>> message: assigning G726-16/8000 payload type number 107
>> >>>> message: assigning G726-24/8000 payload type number 108
>> >>>> message: assigning G726-32/8000 payload type number 109
>> >>>> message: assigning G726-40/8000 payload type number 113
>> >>>> message: assigning AAL2-G726-16/8000 payload type number 114
>> >>>> message: assigning AAL2-G726-24/8000 payload type number 115
>> >>>> message: assigning AAL2-G726-32/8000 payload type number 116
>> >>>> message: assigning AAL2-G726-40/8000 payload type number 117
>> >>>> message: assigning SILK/8000 payload type number 118
>> >>>> message: assigning SILK/12000 payload type number 119
>> >>>> message: assigning SILK/16000 payload type number 120
>> >>>> message: assigning SILK/24000 payload type number 121
>> >>>> message: assigning G729/8000 payload type number 18
>> >>>> message: assigning mpeg4-generic/22050 payload type number 122
>> >>>> message: assigning mpeg4-generic/44100 payload type number 123
>> >>>> message: assigning opus/48000 payload type number 124
>> >>>> message: assigning 1016/8000 payload type number 1
>> >>>> message: assigning GSM/8000 payload type number 3
>> >>>> message: assigning G723/8000 payload type number 4
>> >>>> message: assigning LPC/8000 payload type number 7
>> >>>> message: assigning PCMA/8000 payload type number 8
>> >>>> message: assigning G722/8000 payload type number 9
>> >>>> message: assigning L16/44100 payload type number 10
>> >>>> message: assigning L16/44100 payload type number 11
>> >>>> message: assigning G729/8000 payload type number 18
>> >>>> message: assigning H261/90000 payload type number 31
>> >>>> message: assigning MPV/90000 payload type number 32
>> >>>> message: assigning H263/90000 payload type number 34
>> >>>> message: Mediastreamer2 2.9.1 (git: 2.9.0-7-g51d3c20) starting.
>> >>>> message: ms_base_init() done
>> >>>> message: Registering all soundcard handlers
>> >>>> message: Card 'ALSA: default device' added
>> >>>> warning: Could not attach mixer to card: Argument invalide
>> >>>> warning: Strange, sound card HDA Intel does not seems to be capable of 
>> >>>> anything, retrying with plughw...
>> >>>> message: Card 'ALSA: HDA Intel' added
>> >>>> message: Card 'PulseAudio: default' added
>> >>>> message: New PulseAudio context state: PA_CONTEXT_CONNECTING
>> >>>> message: Registering all webcam handlers
>> >>>> message: New PulseAudio context state: PA_CONTEXT_AUTHORIZING
>> >>>> message: New PulseAudio context state: PA_CONTEXT_SETTING_NAME
>> >>>> message: New PulseAudio context state: PA_CONTEXT_READY
>> >>>> message: Webcam V4L2: /dev/video0 added
>> >>>> message: Webcam StaticImage: Static picture added
>> >>>> message: ms_voip_init() done
>> >>>> message: Loading ms plugins from 
>> >>>> [/usr/lib/i386-linux-gnu/mediastreamer/plugins]
>> >>>> message: Cannot open directory 
>> >>>> /usr/lib/i386-linux-gnu/mediastreamer/plugins: Aucun fichier ou dossier 
>> >>>> de ce type
>> >>>> message: Cannot open directory /usr/lib/liblinphone/plugins: Aucun 
>> >>>> fichier ou dossier de ce type
>> >>>> message: linphone_core_set_playback_gain_db(): no active call.
>> >>>> message: linphone_core_set_mic_gain_db(): no active call.
>> >>>> message: MTU is supposed to be 1300, rtp payload max size will be 1240
>> >>>> message: Could not find encoder for 1016
>> >>>> message: Could not find decoder for 1016
>> >>>> message: Could not find encoder for GSM
>> >>>> message: Could not find decoder for GSM
>> >>>> message: Could not find encoder for G723
>> >>>> message: Could not find decoder for G723
>> >>>> message: Could not find encoder for LPC
>> >>>> message: Could not find decoder for LPC
>> >>>> message: Could not find encoder for G729
>> >>>> message: Could not find decoder for G729
>> >>>> message: Could not find encoder for iLBC
>> >>>> message: Could not find decoder for iLBC
>> >>>> message: Could not find encoder for telephone-event
>> >>>> message: Could not find decoder for telephone-event
>> >>>> message: Could not find encoder for AMR
>> >>>> message: Could not find decoder for AMR
>> >>>> message: Could not find encoder for AMR-WB
>> >>>> message: Could not find decoder for AMR-WB
>> >>>> message: Could not find encoder for 1015
>> >>>> message: Could not find decoder for 1015
>> >>>> message: Could not find encoder for SILK
>> >>>> message: Could not find decoder for SILK
>> >>>> message: Could not find encoder for SILK
>> >>>> message: Could not find decoder for SILK
>> >>>> message: Could not find encoder for SILK
>> >>>> message: Could not find decoder for SILK
>> >>>> message: Could not find encoder for SILK
>> >>>> message: Could not find decoder for SILK
>> >>>> message: Could not find encoder for mpeg4-generic
>> >>>> message: Could not find decoder for mpeg4-generic
>> >>>> message: Could not find encoder for mpeg4-generic
>> >>>> message: Could not find decoder for mpeg4-generic
>> >>>> message: Could not find encoder for H261
>> >>>> message: Could not find decoder for H261
>> >>>> message: Could not find encoder for MPV
>> >>>> message: Could not find decoder for MPV
>> >>>> message: Could not find encoder for x-snow
>> >>>> message: Could not find decoder for x-snow
>> >>>> message: Could not find encoder for H264
>> >>>> message: TLS server method
>> >>>> warning: no system certificate loaded
>> >>>> error: eXosip: Couldn't read CA list
>> >>>> error: eXosip: DH_generate_parameters_ex failed!
>> >>>> message: eXosip: Trusted CA folder : '/etc/ssl/certs'
>> >>>> warning: no system certificate loaded
>> >>>> message: getaddrinfo failure. 0.0.0.0:5061 (-9)
>> >>>> warning: Could not start tls transport on port 5061, maybe this port is 
>> >>>> already used.
>> >>>> message: Local interface to reach 87.98.157.38 is 192.168.1.104.
>> >>>> message: Local interface to reach 87.98.157.38 is 192.168.1.104.
>> >>>> message: New local ip address is 192.168.1.104
>> >>>> message: Network state is now [UP]
>> >>>> message: Local interface to reach sip.linphone.org is 192.168.1.104.
>> >>>> error: wrong state: create transport layer first
>> >>>> error: wrong state: create transport layer first
>> >>>> error: wrong state: create transport layer first
>> >>>> message: allocating transaction resource 1 1322765239
>> >>>> message: Local interface to reach 87.98.157.38 is 192.168.1.104.
>> >>>> _______________________________________________
>> >>>> Linphone-users mailing list
>> >>>> address@hidden
>> >>>> https://lists.nongnu.org/mailman/listinfo/linphone-users
>> >>>
>> >>> _______________________________________________
>> >>> Linphone-users mailing list
>> >>> address@hidden
>> >>> https://lists.nongnu.org/mailman/listinfo/linphone-users
>> >>
>> >> _______________________________________________
>> >> Linphone-users mailing list
>> >> address@hidden
>> >> https://lists.nongnu.org/mailman/listinfo/linphone-users
>> >
>> > _______________________________________________
>> > Linphone-users mailing list
>> > address@hidden
>> > https://lists.nongnu.org/mailman/listinfo/linphone-users
>>
>> _______________________________________________
>> Linphone-users mailing list
>> address@hidden
>> https://lists.nongnu.org/mailman/listinfo/linphone-users
>
> _______________________________________________
> Linphone-users mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/linphone-users