gnokii-users post from address@hidden requires approval

[gnokii-users-owner]

As list administrator, your authorization is requested for the
following mailing list posting:

    List:    address@hidden
    From:    address@hidden
    Subject: Get SMS from RAZR v3 (USB, Gentoo)
    Reason:  Post by non-member to a members-only list

At your convenience, visit:

    http://lists.nongnu.org/mailman/admindb/gnokii-users
        
to approve or deny the request.

--- Begin Message --- Subject: Get SMS from RAZR v3 (USB, Gentoo) Date: Mon, 9 Jul 2007 11:37:13 -0500

#1.

I can send message with --sendsms command

But I can't use --getsms

gnokii --getsms ME 1

gnokii --getsms SM 1

gnokii --getsms F1 1

gnokii --getsms IN 1

these are not working

 

#2.

How can I send AT command directly to phone?

My phone is connected to /dev/ttyACM0

echo -ne "AT' > /dev/ttyACM0    --> no response

 

 

Phone: Motorola RAZR (cingular) with USB cable

OS: Gentoo Linux (2.6.20)

GNOKII Version 0.6.14

 

# gnokii --identify
GNOKII Version 0.6.14
IMEI         : IMEI356868000310391
Manufacturer : Motorola CE, Copyright 2004
Model        : GSM900","GSM1800","GSM1900","GS
Product name : GSM900","GSM1800","GSM1900","GS
Revision     : R374_G_0E.40.9CR

# gnokii --monitor once
GNOKII Version 0.6.14
Entering monitor mode...
RFLevel: 9
Battery: 90
Power Source: battery
CALL0: IDLE
CALL1: IDLE
Leaving monitor mode...

.gnokiirc

port = /dev/ttyACM0

model = AT

initlength = default
connection = serial
use_locking = yes
serial_baudrate = 19200
smsc_timeout = 10
[gnokiid]
bindir = /usr/sbin/
[connect_script]
TELEPHONE = 12345678
[disconnect_script]
[logging]
debug = on
where to log the rlp debug output (on: stderr, off: /dev/null)
rlpdebug = off
xdebug = off

--- End Message ---

> --- Begin Message ---
>
>
>
> Subject: 
>
> confirm 066141352d1fe970ea4985942de10f39b46677ea
>
>
>
>
> If you reply to this message, keeping the Subject: header intact,
> Mailman will discard the held message.  Do this if the message is
> spam.  If you reply to this message and include an Approved: header
> with the list password in it, the message will be approved for posting
> to the list.  The Approved: header can also appear in the first line
> of the body of the reply.
>
> --- End Message ---