Hello,
I just finished porting lwip to my hardware(lcp2468), and
after running some initial tests just pinging the board I have
ran into an issue.
The first batch of pings I send are usually replied to in a
reasonable time(<5 ms), however as I continue to ping the
board the response time gets worse and worse. I watched the
activity on wireshark, and determined that the board is still
responding, it is just taking up to 12 seconds to do so.
I ran a trace on the board, and it appears that there is not
an issue where it is receiving packets too quickly to process
them, as I can see it hitting the ISR when the packet is
received, moving the packet into the mailbox, and running
tcpip_input followed by ip_input before another packet is
received.
I am not sure where to even begin looking for a way to solve
this. A little information about my implementation is that I am
using this with freertos, I have 1 thread set up for the main
tcpip thread, and one thread that handles inputs whenever the
emac ISR wakes it.
If there is anything that I can provide that might give
someone some insight please let me know, and thanks in advance
for any help.
Louis
_______________________________________________
lwip-users mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/lwip-users