[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
LYNX-DEV LYExit reprise
From: |
Brian Tillman, x8425 |
Subject: |
LYNX-DEV LYExit reprise |
Date: |
Thu, 11 Dec 1997 13:34:49 -0500 |
Yesterday I reported a problem in in the 0_98 development code (that Tom Dickey
is patching, thanks) about a problem in UCAux.c. I was able to fix that myself,
too, with Fote's guidance. I also reported a problem with the Dec. 4 lynx271f
code wherein exiting Lynx produced a stack dump. After building the development
code, I found that it, too, demonstrated the stack dump. Searching the archives
produces this posting about someone else who noticed this problem. No one ever
responded. I notice, too that this person is also using the same VMS version
I was when I rediscovered the LYExit abort, and he's also using VAX C (albeit a
slightly later version than I).
>
> LYNX-DEV Lynx problems on VMS
> _________________________________________________________________
>
> * To: address@hidden
> * Subject: LYNX-DEV Lynx problems on VMS
> * From: address@hidden
> * Date: Sun, 16 Nov 1997 17:15:45 +1000
> * Reply-To: address@hidden
> * Sender: address@hidden
> _________________________________________________________________
>
>
> I recently tried to build the development version of lynx, but there
>were a few minor problems.....
>
>
> From the build.com log file.......
>
>$ cc UCAuto
>$ cc UCAux
> UCCanUniTranslateFrom(cs_in));
>%CC-E-INVOPERAND, Invalid right operand of a "&&" operator.
> Listing line number 5256.
> At line number 198 in DISK$MHLRF73:[CUSER.LYNX2-7-1.SRC]UCAUX.C
>;1.
>
> UCCanTranslateUniTo(cs_out));
>%CC-E-INVOPERAND, Invalid right operand of a "&&" operator.
> Listing line number 5274.
> At line number 216 in DISK$MHLRF73:[CUSER.LYNX2-7-1.SRC]UCAUX.C
>;1.
>
> }
>%CC-I-NOBJECT, No object file produced.
> Listing line number 5368.
> At line number 310 in DISK$MHLRF73:[CUSER.LYNX2-7-1.SRC]UCAUX.C
>;1.
>
>%CC-I-SUMMARY, Completed with 2 error(s), 0 warning(s), and
> 1 informational messages.
> At line number 310 in DISK$MHLRF73:[CUSER.LYNX2-7-1.SRC]UCAUX.C
>;1.
>
>$ CLEANUP:
>
> I managed to fiddle the C to get past this, but when I tried to run it
> started OK, but typing 'q' resulted in...
>
>......[snip]...
>[7mAre you sure you want [m[24;24H[7mo quit? [Y] [m[K[24;1H
>[K[;H[2J[;H[2J[;H[2J>
>%SYSTEM-F-ACCVIO, access violation, reason mask=05, virtual address=FFFF0031, P
>C
>=0015056D, PSL=03C00000
>%TRACE-F-TRACEBACK, symbolic stack dump follows
>module name routine name line rel PC abs PC
>
> 0015056D 0015056D
> 00155994 00155994
>UCX$CRTLIBXFR HTONS 8020FCAA 802EECB2
> 001554B2 001554B2
>LYEXIT LYexit 4900 00000033 0008551B
>LYMAIN main 22388 00001766 0008ED8A
>
> When I tried to browse it seemed functional, however when I turned
>trace on and tried to follow a link....
>....[snip]....
>[m[24;16H[7merple.net.au/~lions/header.htm[m[17;23H
>[7mGarriga Home Page[m[24;80H[24;1H[7mTrac[m[24;6H[7m ON![m[K
>[24;1H[7m-mor[m[24;6H[7m- http://werple.net.au/~lions/header.htm
>[m[24;80H[24;80H
>
>LYpush: address:http://localhost/docs/start/lynx_start.html
> title:Welcome to Manly Hydraulics Laboratory Web Services
>getfile: getting http://werple.net.au/~lions/header.htm
>
>HTParse: aName:http://werple.net.au/~lions/header.htm relatedName:
>HTParse: result:werple.net.au
>[24;1H[7mGetting h[m[24;11H[7mtp:[m[24;15H[7m/werple.net.au/~lions/header.htm[m
>
>HTParse: aName:http://werple.net.au/~lions/header.htm relatedName:
>HTParse: result:
>Entered HTAnchor_findAddress
>Anchor 22f560 with address `http://werple.net.au/~lions/header.htm' already exi
>s
>ts.
>HTAccess: loading document http://werple.net.au/~lions/header.htm
>HTParse: aName:http://werple.net.au/~lions/header.htm relatedName:file:
>HTParse: result:http
>HTParse: aName:http://werple.net.au/~lions/header.htm relatedName:
>HTParse: result:werple.net.au
>HTParse: aName:http://werple.net.au/~lions/header.htm relatedName:
>HTParse: result:http
>HTParse: aName:http://werple.net.au/~lions/header.htm relatedName:
>HTParse: result:werple.net.au
>Looking up werple.net.au.
>HTParseInet: Parsed address as port 80, IP address 203.9.190.18
>Making HTTP connection to werple.net.au.
>HTParse: aName:http://werple.net.au/~lions/header.htm relatedName:
>1
>HTParse: result:/~lions/header.htm
>HTParse: aName:http://werple.net.au/~lions/header.htm relatedName:
>HTParse: result:werple.net.au
>HTParse: aName:http://werple.net.au/~lions/header.htm relatedName:
>1
>HTParse: result:/~lions/header.htm
>HTParse: aName:http://werple.net.au/~lions/header.htm relatedName:
>1
>HTParse: result:~lions/header.htm
>HTParse: aName:http://werple.net.au/~lions/header.htm relatedName:
>HTParse: result:werple.net.au
>%SYSTEM-F-ACCVIO, access violation, reason mask=00, virtual address=00000050, P
>C
>=001545CC, PSL=0BC00000
>%TRACE-F-TRACEBACK, symbolic stack dump follows
>module name routine name line rel PC abs PC
>
> 001545CC 001545CC
> 00150BB2 00150BB2
>LYCOOKIE LYCookie 20945 0000005C 00082E40
>HTTP HTLoadHTTP 17428 000009F8 000CB7AC
>HTACCESS HTLoad 15767 00000078 000BE560
>HTACCESS HTLoadDocument 16013 00000256 000BE816
>HTACCESS HTLoadAbsolute 16191 0000004F 000BEB57
>LYGETFILE getfile 20901 00000D48 000879EC
>LYMAINLOOP mainloop 24962 0000081D 00090C15
>LYMAIN main 22383 00001752 0008ED76
>>[m
>[24;1H[K[;H[2J
>SYSTEM-F-ACCVIO, access violation, reason mask=05, virtual address=FFFF0031, PC
>=0015056D, PSL=03C00000
>
> Improperly handled condition, image exit forced.
>
> Signal arguments Stack contents
>
> Number = 00000005 00000000
> Name = 0000000C 2FFC0000
> 00000005 0014DC08
> FFFF0031 7FE35798
> 0015056D 00155994
> 03C00000 00000006
> 00000006
> 00162EBC
> 00000000
> 7FE354A1
>
> Register dump
>
> R0 = 00000000 R1 = 0016A878 R2 = 00000006 R3 = 00000006
> R4 = 00162EBC R5 = 00000000 R6 = 7FE354A1 R7 = FFFF0000
> R8 = FFFF0044 R9 = FFFF00F4 R10= 00000006 R11= 00162ED8
> AP = 7FE35718 FP = 7FE356D8 SP = 7FE35754 PC = 0015056D
> PSL= 03C00000
>
>
>
>(VAX VMS 5.5-2, VAX C 3.2, UCX 4.1, lynx2.7.1ac-0.94.zip 16-nov-97)
>
> Regards
> * * * * * Tony Bolton
>**** **** ** ** ** TBolton 'at' mhl.nsw.gov.au
>** **** ** ********* ** MANLY HYDRAULICS LABORATORY.
>** ** ** ********* ** 110B King ST. Manly Vale 2093 Sydney AUSTRALI
>A
>** ** ** ** ******** Phone +61 2 99490200 FAX +61 2 99486185
> * * * * ****** http://www.mhl.nsw.gov.au
--
Brian Tillman Internet: tillman_brian at si.com
Smiths Industries, Inc. tillman at swdev.si.com
4141 Eastern Ave., MS239 Addresses modified to prevent
Grand Rapids, MI 49518-8727 SPAM. Replace "at" with "@"
This opinion doesn't represent that of my company
- LYNX-DEV LYExit reprise,
Brian Tillman, x8425 <=