[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[sr #110264] Build fails on x86-64 for release-10.1.2-1264-gcf5d92154 (g
From: |
anonymous |
Subject: |
[sr #110264] Build fails on x86-64 for release-10.1.2-1264-gcf5d92154 (git tip) |
Date: |
Mon, 13 Jul 2020 19:00:24 -0400 (EDT) |
User-agent: |
Mozilla/5.0 (X11; Fedora; Linux x86_64; rv:78.0) Gecko/20100101 Firefox/78.0 |
URL:
<https://savannah.gnu.org/support/?110264>
Summary: Build fails on x86-64 for
release-10.1.2-1264-gcf5d92154 (git tip)
Project: MIT/GNU Scheme
Submitted by: None
Submitted on: Mon 13 Jul 2020 11:00:22 PM UTC
Category: None
Priority: 5 - Normal
Severity: 5 - Blocker
Status: None
Privacy: Public
Assigned to: None
Originator Email: vonbrand@inf.utfsm.cl
Open/Closed: Open
Discussion Lock: Any
Operating System: GNU/Linux
_______________________________________________________
Details:
The build (using mit-scheme-10.1.11-svm1, mit-scheme-10.1.11-x86-64,
mit-scheme-11.0.90-x86-64) fails. I did the Setup.sh, configure, make dance as
directed. Configuration using 10.0.90 is:
./configure --prefix=$HOME --enable-blowfish --enable-gdbm --enable-pgsql
Build fails with:
(echo '(with-working-directory-pathname "cref"' && \
echo ' (lambda () (load "cref.cbf")))') \
| 'mit-scheme-x86-64' --batch-mode --no-init-file --load
runtime/host-adapter.scm --eval '(begin )'
;Loading "cref.cbf"... done
(echo '(with-working-directory-pathname "runtime"' && \
echo ' (lambda () (load "runtime.cbf")))') \
| 'mit-scheme-x86-64' --batch-mode --no-init-file --load
runtime/host-adapter.scm --eval '(begin )'
;Loading "runtime.cbf"... done
(. etc/functions.sh && get_fasl_file && cd runtime \
&& (echo '(disk-save "../lib/runtime.com")' \
| ../run-build --batch-mode --fasl "${FASL}"))
Bad compiled-code version in FASL File: make.com
File has: compiled-code interface 3; architecture 14.
Expected: compiled-code interface 4; architecture 14.
Microcode Error: No error handlers.
Error code 0x3a (fasload-compiled-mismatch).
**** Stack Trace ****
{0x23e0f88}
Return code: [return-code pop-return-error]
Expression: #f
{0x23e0f98}
Return code: [return-code internal-apply]
Expression: #f
{0x23e0fa8} ...: [false 0x2]
{0x23e0fb0} ...: [primitive BINARY-FASLOAD]
{0x23e0fb8} ...: "make.com"
{0x23e0fc0}
Return code: [return-code combination-save-value]
Expression: [combination [primitive SCODE-EVAL] ... (2 args) 0x2428ba8]
{0x23e0fd0} ...: #f
{0x23e0fd8} ...: [manifest-nm-vector 0x1] (skipping)
{0x23e0fe8} ...: #f
{0x23e0ff0}
Return code: [return-code non-existent-continuation]
Expression: #f
No error handler.
make[1]: *** [Makefile:804: lib/runtime.com] Error 1
make[1]: Leaving directory '/my/home/tmp/SCHEME/mit-scheme/src'
make: *** [Makefile:684: all] Error 2
_______________________________________________________
Reply to this item at:
<https://savannah.gnu.org/support/?110264>
_______________________________________________
Message sent via Savannah
https://savannah.gnu.org/
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [sr #110264] Build fails on x86-64 for release-10.1.2-1264-gcf5d92154 (git tip),
anonymous <=