|
| From: | David Kimdon <address@hidden> |
| Subject: | [openap-cvs] : openap-main/config/wl11000 bridge,NONE,1.1 configfs,NONE,1.1 tcpip.bridge,NONE,1.1 tcpip.router,NONE,1.1 wireless,NONE,1.1 config.mk,1.3,1.4 defconfig,1.1,1.2 defconfig.kernel,1.1,NONE |
| Date: | Tue, 06 Aug 2002 15:59:53 -0400 |
Update of /cvsroot/openap/openap-main/config/wl11000
In directory subversions:/tmp/cvs-serv14344
Modified Files:
config.mk defconfig
Added Files:
bridge configfs tcpip.bridge tcpip.router wireless
Removed Files:
defconfig.kernel
Log Message:
use new rc-script framework
--- NEW FILE ---
#!/bin/sh
EXITCODE=1
case "$1" in
start)
echo "Starting BRIDGING services:"
# fixme: move eth0 stuff to wired
ifconfig eth0 up
WLANS=`ifconfig -a | cut -d ' ' -f 1 | grep wlan`
ETHS=`ifconfig -a | cut -d ' ' -f 1 | grep eth`
brctl addbr br0
brctl sethello br0 2 # must keep this below fd
# maxage - length of time between configuration messages
# (hellos) before a bridge decides that a port is no longer
# reachable. we'll set it to the time it takes an ap to
# reboot. the longer it is, the less we are affected by
# unnecessary spanning tree recalculations
brctl setmaxage br0 60
brctl setfd br0 4
brctl setbridgeprio br0 100
# wlans must be first so the bridge takes the
# MAC address of the wlan
for i in $WLANS $ETHS ; do
brctl addif br0 $i
done
ifconfig br0 up
# see if any packets received on eth0 interface
#ETH_PKTS=`grep eth0 /proc/net/dev| cut -d " " -f 5`
#if [ "$ETH_PKTS" -ne "0" ] ; then
# # if eth0 is active lower bridge priority
# # (we want the wired bridges to be root)
# echo "lowering bridge priority"
# brctl setbridgeprio br0 0
#fi
EXITCODE=0
;;
stop)
echo "Shutting down BRIDGING services:"
WLANS=`brctl show | sed -n 's/.*\(wlan.*\).*/\1/p'`
ETHS=`brctl show | sed -n 's/.*\(eth.*\).*/\1/p'`
# teardown the bridge
ifconfig br0 down
for i in $WLANS $ETHS ; do
brctl delif br0 $i
done
brctl delbr br0
EXITCODE=0
;;
status)
echo "Checking BRIDGING service status:"
EXITCODE=0
;;
restart|reload)
echo "Restarting BRIDGING services:"
$0 stop
sleep 1
$0 start
EXITCODE=$?
;;
*)
echo "Usage: $0 {start|stop|status|restart|reload}"
exit 1;
;;
esac
--- NEW FILE ---
#! /bin/sh
NAME="configfs"
case "$1" in
start)
echo -n "Starting $NAME: "
# mount the read-write configuration filesystem in /etc
cd /etc/rw
dd if=/dev/mtd0 bs=8192 count=2 skip=124 | tar xv 2>/dev/null
if [ $? = 0 ] ; then
echo "successfully read config data"
else
echo "failed to read config data"
echo "using default config from filesystem"
cp -a /etc/rw.default/* /var/etc/rw
fi
echo "Done."
;;
stop)
echo -n "Stopping $NAME: "
rm -rf /etc/rw/*
echo "Done."
;;
commit)
echo -n "Committing $NAME: "
rm -f /tmp/etc_rw.tar
cd /etc/rw
tar cvf /tmp/etc_rw.tar *
/sbin/update /dev/mtd0 0xf8000 0x4000
# do not remove me!!! update will not work i promise dave:
dd if=/tmp/etc_rw.tar of=/dev/mtd0 bs=8192 count=2 seek=124 conv=notrunc
rm -f /tmp/etc_rw.tar
echo "Done."
;;
clear)
echo -n "Clearing $NAME: "
/sbin/update /dev/mtd0 0xf8000 0x4000
echo "Done."
;;
restart)
$0 stop
sleep 1
$0 start
;;
*)
echo "Usage: $0 {start|stop|restart|commit|clear}" >&2
exit 1
;;
esac
exit 0
--- NEW FILE ---
#! /bin/sh
NAME="tcpip"
interface="br0"
set -e
case "$1" in
start)
echo -n "Initializing $NAME: "
. /etc/rw/interfaces/$interface
if [ "$dhcp" = "enabled" ] ; then
/sbin/udhcpc -i $interface
else
# run the dhcp interface config script manually
export broadcast subnet router domain dns interface
ip=$ipaddress
/usr/share/udhcpc/default.script bound
fi
echo "Done."
;;
stop)
echo -n "Stopping $NAME: "
. /etc/rw/interfaces/$interface
if [ "$dhcp" = "enabled" ] ; then
/usr/bin/killall -9 udhcpc
else
/sbin/ifconfig $interface down
fi
echo "Done."
;;
restart)
$0 stop
sleep 1
$0 start
;;
*)
echo "Usage: $0 {start|stop|restart}" >&2
exit 1
;;
esac
exit 0
--- NEW FILE ---
#! /bin/sh
NAME="tcpip"
interface="eth0"
set -e
case "$1" in
start)
echo -n "Initializing $NAME: "
. /etc/rw/interfaces/$interface
if [ "$dhcp" = "enabled" ] ; then
/sbin/udhcpc -i $interface
else
# run the dhcp interface config script manually
export broadcast subnet router domain dns interface
ip=$ipaddress
/usr/share/udhcpc/default.script bound
fi
/sbin/iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
/bin/echo 1 > /proc/sys/net/ipv4/ip_forward
/sbin/ifconfig wlan0 192.168.100.1
echo "Done."
;;
stop)
echo -n "Stopping $NAME: "
. /etc/rw/interfaces/$interface
if [ "$dhcp" = "enabled" ] ; then
/usr/bin/killall -9 udhcpc
else
/sbin/ifconfig $interface down
fi
/sbin/iptables -t nat -D POSTROUTING -o eth0 -j MASQUERADE
/bin/echo 0 > /proc/sys/net/ipv4/ip_forward
/sbin/ifconfig wlan0 down
echo "Done."
;;
restart)
$0 stop
sleep 1
$0 start
;;
*)
echo "Usage: $0 {start|stop|restart}" >&2
exit 1
;;
esac
exit 0
--- NEW FILE ---
#! /bin/sh
NAME="wireless"
IFACE="wlan0"
case "$1" in
start)
echo -n "Starting $NAME: "
. /etc/rw/interfaces/$IFACE
/sbin/insmod pcmcia_core
/sbin/insmod i82365 ignore=1
/sbin/insmod ds
/sbin/insmod hostap_cs ignore_cis_vcc=1 essid=$SSID channel=$DSCHAN
/sbin/cardmgr
sleep 1
/usr/bin/killall -9 cardmgr
WLANS=`ifconfig -a | cut -d ' ' -f 1 | grep wlan`
for i in $WLANS ; do
/sbin/ifconfig $i up
done
# FIX: this should somehow be moved int /etc/init.d/wired
HARDADDR=`/sbin/ifconfig wlan0 | sed -n 's/.*HWaddr\(.*\)/\1/p'`
if [ -n "$HARDADDR" ] ; then
# # subtract 1 from byte 1 FIXME this is a hack
# BYTE1=`echo $HARDADDR | sed -n 's/[^:]*:\([0-9A-F]*\).*/\1/p'`
# BYTE1=`expr $BYTE1 - 1`
# HARDADDR=`echo $HARDADDR | sed -e "s/\(:[0-9A-F]*\)/:$BYTE1/"`
/sbin/ifconfig eth0 hw ether $HARDADDR
fi
echo "Done."
;;
stop)
echo -n "Stopping $NAME: "
# remove from bridge
WLANS=`brctl show | sed -n 's/.*\(wlan.*\).*/\1/p'`
for i in $WLANS ; do
/sbin/brctl delif br0 $i
done
# tear down
WLANS=`ifconfig | cut -d ' ' -f 1 | grep wlan`
for i in $WLANS ; do
/sbin/ifconfig $i down
done
# remove modules
/usr/bin/killall -9 cardmgr
/sbin/rmmod hostap_cs
/sbin/rmmod ds
/sbin/rmmod i82365
/sbin/rmmod pcmcia_core
echo "Done."
;;
restart)
/etc/init.d/$NAME stop
sleep 1
/etc/init.d/$NAME start
;;
*)
echo "Usage: $0 {start|stop|restart}" >&2
exit 1
;;
esac
exit 0
Index: config.mk
===================================================================
RCS file: /cvsroot/openap/openap-main/config/wl11000/config.mk,v
retrieving revision 1.3
retrieving revision 1.4
diff -u -r1.3 -r1.4
--- config.mk 6 Aug 2002 19:47:58 -0000 1.3
+++ config.mk 6 Aug 2002 19:59:50 -0000 1.4
@@ -1,9 +1,19 @@
-
WL11000=config/wl11000
rcS_FILES += $(WL11000)/S10configfs $(WL11000)/S20wireless
rc1_FILES += $(WL11000)/K80configfs $(WL11000)/K70wireless
+
+ifeq ($(CONFIG_AP_BRIDGE),y)
+rcS_FILES += $(WL11000)/S30bridge
+rc1_FILES += $(WL11000)/K60bridge
+rcS_FILES += $(WL11000)/S40tcpip.bridge
+rc1_FILES += $(WL11000)/K50tcpip.bridge
+endif
+ifeq ($(CONFIG_AP_ROUTER),y)
+rcS_FILES += $(WL11000)/S40router
+rc1_FILES += $(WL11000)/K50router
+endif
sram: subdirs
$(MAKE) -C alios clean
Index: defconfig
===================================================================
RCS file: /cvsroot/openap/openap-main/config/wl11000/defconfig,v
retrieving revision 1.1
retrieving revision 1.2
diff -u -r1.1 -r1.2
--- defconfig 19 Jul 2002 00:36:35 -0000 1.1
+++ defconfig 6 Aug 2002 19:59:50 -0000 1.2
@@ -17,5 +17,610 @@
CONFIG_PCMCIA_CS=y
CONFIG_BUSYBOX=y
CONFIG_ERASE=y
-CONFIG_IPTABLES=y
+# CONFIG_IPTABLES is not set
CONFIG_PRISM2=y
+#
+# Automatically generated by make menuconfig: don't edit
+#
+CONFIG_X86=y
+CONFIG_ISA=y
+# CONFIG_SBUS is not set
+CONFIG_UID16=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_KMOD is not set
+
+#
+# Processor type and features
+#
+# CONFIG_M386 is not set
+CONFIG_M486=y
+# CONFIG_M586 is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M586MMX is not set
+# CONFIG_M686 is not set
+# CONFIG_MPENTIUMIII is not set
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MWINCHIPC6 is not set
+# CONFIG_MWINCHIP2 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MCYRIXIII is not set
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_INVLPG=y
+CONFIG_X86_CMPXCHG=y
+CONFIG_X86_XADD=y
+CONFIG_X86_BSWAP=y
+CONFIG_X86_POPAD_OK=y
+# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_X86_L1_CACHE_SHIFT=4
+CONFIG_X86_USE_STRING_486=y
+CONFIG_X86_ALIGNMENT_16=y
+CONFIG_X86_PPRO_FENCE=y
+CONFIG_AMD_ELAN=y
+CONFIG_WL11000=y
+# CONFIG_TOSHIBA is not set
+# CONFIG_I8K is not set
+# CONFIG_MICROCODE is not set
+# CONFIG_X86_MSR is not set
+# CONFIG_X86_CPUID is not set
+CONFIG_NOHIGHMEM=y
+# CONFIG_HIGHMEM4G is not set
+# CONFIG_HIGHMEM64G is not set
+CONFIG_MATH_EMULATION=y
+# CONFIG_MTRR is not set
+# CONFIG_SMP is not set
+# CONFIG_X86_UP_APIC is not set
+# CONFIG_X86_UP_IOAPIC is not set
+
+#
+# General setup
+#
+CONFIG_NET=y
+# CONFIG_PCI is not set
+# CONFIG_EISA is not set
+# CONFIG_MCA is not set
+# CONFIG_HOTPLUG is not set
+# CONFIG_PCMCIA is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_SYSCTL is not set
+CONFIG_KCORE_ELF=y
+# CONFIG_KCORE_AOUT is not set
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_PM is not set
+# CONFIG_ACPI is not set
+# CONFIG_APM is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_PARTITIONS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLOCK is not set
+CONFIG_MTD_BLOCK_RO=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+# CONFIG_MTD_AMDSTD is not set
+# CONFIG_MTD_SHARP is not set
+# CONFIG_MTD_JEDEC is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=1000000
+CONFIG_MTD_PHYSMAP_LEN=100000
+CONFIG_MTD_PHYSMAP_BUSWIDTH=1
+CONFIG_MTD_PHYSMAP_TYPE="jedec_probe"
+# CONFIG_MTD_PHYSMAP_2DEVICES is not set
+# CONFIG_MTD_PNC2000 is not set
+# CONFIG_MTD_SC520CDP is not set
+# CONFIG_MTD_NETSC520 is not set
+# CONFIG_MTD_SBC_GXX is not set
+# CONFIG_MTD_ELAN_104NC is not set
+# CONFIG_MTD_MIXMEM is not set
+# CONFIG_MTD_OCTAGON is not set
+# CONFIG_MTD_VMAX is not set
+# CONFIG_MTD_L440GX is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_DOC1000 is not set
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOCPROBE is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play configuration
+#
+# CONFIG_PNP is not set
+# CONFIG_ISAPNP is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_XD is not set
+# CONFIG_PARIDE is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_INITRD is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+# CONFIG_BLK_DEV_MD is not set
+# CONFIG_MD_LINEAR is not set
+# CONFIG_MD_RAID0 is not set
+# CONFIG_MD_RAID1 is not set
+# CONFIG_MD_RAID5 is not set
+# CONFIG_MD_MULTIPATH is not set
+# CONFIG_BLK_DEV_LVM is not set
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+# CONFIG_NETLINK_DEV is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_FILTER is not set
+# CONFIG_UNIX is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_INET_ECN is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_IPV6 is not set
+# CONFIG_KHTTPD is not set
+# CONFIG_ATM is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_DECNET is not set
+CONFIG_BRIDGE=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_LLC is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_FASTROUTE is not set
+# CONFIG_NET_HW_FLOWCONTROL is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+# CONFIG_PHONE_IXJ is not set
+# CONFIG_PHONE_IXJ_PCMCIA is not set
+
+#
+# ATA/IDE/MFM/RLL support
+#
+# CONFIG_IDE is not set
+# CONFIG_BLK_DEV_IDE_MODES is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI support
+#
+# CONFIG_SCSI is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_BOOT is not set
+# CONFIG_FUSION_ISENSE is not set
+# CONFIG_FUSION_CTL is not set
+# CONFIG_FUSION_LAN is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+# CONFIG_I2O_BLOCK is not set
+# CONFIG_I2O_LAN is not set
+# CONFIG_I2O_SCSI is not set
+# CONFIG_I2O_PROC is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_ETHERTAP is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_SUNLANCE is not set
+# CONFIG_SUNBMAC is not set
+# CONFIG_SUNQE is not set
+# CONFIG_SUNLANCE is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_LANCE is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_ISA=y
+# CONFIG_E2100 is not set
+# CONFIG_EWRK3 is not set
+# CONFIG_EEXPRESS is not set
+# CONFIG_EEXPRESS_PRO is not set
+# CONFIG_HPLAN_PLUS is not set
+# CONFIG_HPLAN is not set
+# CONFIG_LP486E is not set
+# CONFIG_ETH16I is not set
+CONFIG_NE2000=y
+# CONFIG_NET_PCI is not set
+# CONFIG_NET_POCKET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_MYRI_SBUS is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PLIP is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+# CONFIG_STRIP is not set
+# CONFIG_WAVELAN is not set
+# CONFIG_ARLAN is not set
+# CONFIG_AIRONET4500 is not set
+# CONFIG_AIRONET4500_NONCS is not set
+# CONFIG_AIRONET4500_PROC is not set
+# CONFIG_AIRO is not set
+# CONFIG_HERMES is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+# CONFIG_NET_FC is not set
+# CONFIG_RCPCI is not set
+# CONFIG_SHAPER is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+
+#
+# Amateur Radio support
+#
+# CONFIG_HAMRADIO is not set
+
+#
+# IrDA (infrared) support
+#
+# CONFIG_IRDA is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Old CD-ROM drivers (not SCSI, not IDE)
+#
+# CONFIG_CD_NO_IDESCSI is not set
+
+#
+# Input core support
+#
+# CONFIG_INPUT is not set
+# CONFIG_INPUT_KEYBDEV is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_SERIAL=y
+CONFIG_SERIAL_CONSOLE=y
+# CONFIG_SERIAL_EXTENDED is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_UNIX98_PTY_COUNT=4
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Mice
+#
+# CONFIG_BUSMOUSE is not set
+# CONFIG_MOUSE is not set
+
+#
+# Joysticks
+#
+# CONFIG_INPUT_GAMEPORT is not set
+# CONFIG_QIC02_TAPE is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_INTEL_RNG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_SONYPI is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_FTAPE is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_MWAVE is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# File systems
+#
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_ADFS_FS is not set
+# CONFIG_ADFS_FS_RW is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_FAT_FS is not set
+# CONFIG_MSDOS_FS is not set
+# CONFIG_UMSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_TMPFS is not set
+CONFIG_RAMFS=y
+# CONFIG_ISO9660_FS is not set
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_NTFS_FS is not set
+# CONFIG_NTFS_RW is not set
+# CONFIG_HPFS_FS is not set
+CONFIG_PROC_FS=y
+# CONFIG_DEVFS_FS is not set
+# CONFIG_DEVFS_MOUNT is not set
+# CONFIG_DEVFS_DEBUG is not set
+# CONFIG_DEVPTS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_QNX4FS_RW is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_EXT2_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UDF_FS is not set
+# CONFIG_UDF_RW is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_UFS_FS_WRITE is not set
+
+#
+# Network File Systems
+#
+# CONFIG_CODA_FS is not set
+# CONFIG_INTERMEZZO_FS is not set
+# CONFIG_NFS_FS is not set
+# CONFIG_NFS_V3 is not set
+# CONFIG_ROOT_NFS is not set
+# CONFIG_NFSD is not set
+# CONFIG_NFSD_V3 is not set
+# CONFIG_SUNRPC is not set
+# CONFIG_LOCKD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_NCPFS_PACKET_SIGNING is not set
+# CONFIG_NCPFS_IOCTL_LOCKING is not set
+# CONFIG_NCPFS_STRONG is not set
+# CONFIG_NCPFS_NFS_NS is not set
+# CONFIG_NCPFS_OS2_NS is not set
+# CONFIG_NCPFS_SMALLDOS is not set
+# CONFIG_NCPFS_NLS is not set
+# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_ZISOFS_FS is not set
+CONFIG_ZLIB_FS_INFLATE=y
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MSDOS_PARTITION is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_SMB_NLS is not set
+# CONFIG_NLS is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB is not set
+# CONFIG_USB_UHCI is not set
+# CONFIG_USB_UHCI_ALT is not set
+# CONFIG_USB_OHCI is not set
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_BLUETOOTH is not set
+# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_HP8200e is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_DC2XX is not set
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_SCANNER is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_HPUSBSCSI is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_CDCETHER is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_USS720 is not set
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_RIO500 is not set
+
+#
+# Bluetooth support
+#
+# CONFIG_BLUEZ is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_DEBUG_KERNEL is not set
--- defconfig.kernel DELETED ---
| [Prev in Thread] | Current Thread | [Next in Thread] |