Re: [Openexr-user] error while compiling OpenEXR

[Smitha K]

Hi Greg,


Even after make clean I am getting the following error:

bash-3.00$ gmake clean
gmake: Entering directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0'Making clean in exrenvmap
gmake[1]: Entering directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/exrenvmap'
 rm -f exrenvmap exrenvmap
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
gmake[1]: Leaving directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/exrenvmap'
Making clean in exrmakepreview
gmake[1]: Entering directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/exrmakepreview'
 rm -f exrmakepreview exrmakepreview
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
gmake[1]: Leaving directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/exrmakepreview'
Making clean in exrstdattr
gmake[1]: Entering directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/exrstdattr'
 rm -f exrstdattr exrstdattr
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
gmake[1]: Leaving directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/exrstdattr'
Making clean in vc
gmake[1]: Entering directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/vc'
rm -rf .libs _libs
rm -f *.lo
gmake[1]: Leaving directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/vc'
Making clean in doc
gmake[1]: Entering directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/doc'
rm -rf .libs _libs
rm -f *.lo
gmake[1]: Leaving directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/doc'
Making clean in IlmImfExamples
gmake[1]: Entering directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/IlmImfExamples'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
gmake[1]: Leaving directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/IlmImfExamples'
Making clean in exrmaketiled
gmake[1]: Entering directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/exrmaketiled'
 rm -f exrmaketiled exrmaketiled
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
gmake[1]: Leaving directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/exrmaketiled'
Making clean in exrheader
gmake[1]: Entering directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/exrheader'
 rm -f exrheader exrheader
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
gmake[1]: Leaving directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/exrheader'
Making clean in exrdisplay
gmake[1]: Entering directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/exrdisplay'
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
gmake[1]: Leaving directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/exrdisplay'
Making clean in IlmImfTest
gmake[1]: Entering directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/IlmImfTest'
 rm -f IlmImfTest IlmImfTest
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
gmake[1]: Leaving directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/IlmImfTest'
Making clean in IlmImf
gmake[1]: Entering directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/IlmImf'
test -z "libIlmImf.la" || rm -f libIlmImf.la
rm -f "./so_locations"
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
gmake[1]: Leaving directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/IlmImf'
Making clean in IlmThread
gmake[1]: Entering directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/IlmThread'
test -z "libIlmThread.la" || rm -f libIlmThread.la
rm -f "./so_locations"
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
gmake[1]: Leaving directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/IlmThread'
Making clean in ImathTest
gmake[1]: Entering directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/ImathTest'
 rm -f ImathTest ImathTest
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
gmake[1]: Leaving directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/ImathTest'
Making clean in Imath
gmake[1]: Entering directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/Imath'
test -z "libImath.la" || rm -f libImath.la
rm -f "./so_locations"
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
gmake[1]: Leaving directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/Imath'
Making clean in IexTest
gmake[1]: Entering directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/IexTest'
 rm -f IexTest IexTest
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
gmake[1]: Leaving directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/IexTest'
Making clean in Iex
gmake[1]: Entering directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/Iex'
test -z "libIex.la" || rm -f libIex.la
rm -f "./so_locations"
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
gmake[1]: Leaving directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/Iex'
Making clean in HalfTest
gmake[1]: Entering directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/HalfTest'
 rm -f HalfTest HalfTest
rm -rf .libs _libs
rm -f *.o
rm -f *.lo
gmake[1]: Leaving directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/HalfTest'
Making clean in Half
gmake[1]: Entering directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/Half'
test -z "eLut eLut.h toFloat toFloat.h" || rm -f eLut eLut.h toFloat toFloat.h
test -z "libHalf.la" || rm -f libHalf.la
rm -f "./so_locations"
rm -rf .libs _libs
 rm -f eLut eLut
 rm -f toFloat toFloat
rm -f *.o
rm -f *.lo
gmake[1]: Leaving directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/Half'
Making clean in config
gmake[1]: Entering directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/config'
rm -rf .libs _libs
rm -f *.lo
gmake[1]: Leaving directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/config'
Making clean in .
gmake[1]: Entering directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0'
rm -rf .libs _libs
rm -f *.lo
gmake[1]: Leaving directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0'
gmake: Leaving directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0'



bash-3.00$ gmake
gmake: Entering directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0'Making all in config
gmake[1]: Entering directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/config'
gmake  all-am
gmake[2]: Entering directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/config'
gmake[2]: Leaving directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/config'
gmake[1]: Leaving directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/config'
Making all in Half
gmake[1]: Entering directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/Half'
if g++ -DHAVE_CONFIG_H -I. -I. -I../config -I../config  -I/usr/X11/include -pipe -g -O2 -D_REENTRANT -pthread -MT eLut.o -MD -MP -MF ".deps/eLut.Tpo" -c -o eLut.o eLut.cpp; \
then mv -f ".deps/eLut.Tpo" ".deps/eLut.Po"; else rm -f ".deps/eLut.Tpo"; exit 1; fi
g++: unrecognized option `-pthread'
/bin/bash ../libtool --tag=CXX --mode=link g++ -pipe -g -O2 -D_REENTRANT -pthread   -o eLut  eLut.o  -lposix4
mkdir .libs
g++ -pipe -g -O2 -D_REENTRANT -pthread -o eLut eLut.o  -lposix4
g++: unrecognized option `-pthread'
./eLut > eLut.h
if g++ -DHAVE_CONFIG_H -I. -I. -I../config -I../config  -I/usr/X11/include -pipe -g -O2 -D_REENTRANT -pthread -MT toFloat.o -MD -MP -MF ".deps/toFloat.Tpo" -c -o toFloat.o toFloat.cpp; \
then mv -f ".deps/toFloat.Tpo" ".deps/toFloat.Po"; else rm -f ".deps/toFloat.Tpo"; exit 1; fi
g++: unrecognized option `-pthread'
/bin/bash ../libtool --tag=CXX --mode=link g++ -pipe -g -O2 -D_REENTRANT -pthread   -o toFloat  toFloat.o  -lposix4
g++ -pipe -g -O2 -D_REENTRANT -pthread -o toFloat toFloat.o  -lposix4
g++: unrecognized option `-pthread'
./toFloat > toFloat.h
gmake  all-am
gmake[2]: Entering directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/Half'
if /bin/bash ../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I. -I../config -I../config  -I/usr/X11/include -pipe -g -O2 -D_REENTRANT -pthread -MT half.lo -MD -MP -MF ".deps/half.Tpo" -c -o half.lo half.cpp; \
then mv -f ".deps/half.Tpo" ".deps/half.Plo"; else rm -f ".deps/half.Tpo"; exit 1; fi
 g++ -DHAVE_CONFIG_H -I. -I. -I../config -I../config -I/usr/X11/include -pipe -g -O2 -D_REENTRANT -pthread -MT half.lo -MD -MP -MF .deps/half.Tpo -c half.cpp  -fPIC -DPIC -o .libs/half.o
g++: unrecognized option `-pthread'
 g++ -DHAVE_CONFIG_H -I. -I. -I../config -I../config -I/usr/X11/include -pipe -g -O2 -D_REENTRANT -pthread -MT half.lo -MD -MP -MF .deps/half.Tpo -c half.cpp -o half.o >/dev/null 2>&1
/bin/bash ../libtool --tag=CXX --mode=link g++ -pipe -g -O2 -D_REENTRANT -pthread   -o libHalf.la -rpath /usr/local/lib -version-info 4:0:0 -no-undefined half.lo  -lposix4
libtool: link: `/usr/sfw/lib/gcc/i386-pc-solaris2.10/3.4.3/../../..//libstdc++.la' is not a valid libtool archive
gmake[2]: *** [libHalf.la] Error 1
gmake[2]: Leaving directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/Half'
gmake[1]: *** [all] Error 2
gmake[1]: Leaving directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0/Half'
gmake: *** [all-recursive] Error 1
gmake: Leaving directory `/export/home/sungrid/smitha/bf-blender/openexr-1.4.0'
bash-3.00$




Greg Ercolano wrote:

Smitha K wrote:

/bin/bash ../libtool --tag=CXX --mode=link g++ -pipe -g -O2 -D_REENTRANT -pthread   -o libHalf.la -rpath /usr/local/lib -version-info 4:0:0 -no-undefined half.lo  -lposix4
libtool: link: `/usr/sfw/lib/gcc/i386-pc-solaris2.10/3.4.3/../../..//libstdc++.la' is  not a valid libtool archive
gmake[2]: *** [libHalf.la] Error 1

    Do a 'make clean' first, before doing the 'make' and 'make install'.

    Looks like there's a left over lib file from a previous compile
    on a different platform or different version of the OS, causing the
    above error about an invalid archive.

    Another good clue is that it jumped straight into the lib archiving,
    without actually running any of the compile commands, indicating the
    .o's are probably still left over from the previous compile as well
    as the lib.



_______________________________________________
Openexr-user mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/openexr-user