Hi,
David : mmm, not sure putting the processor in programming will help
to program...the GPS ! (please Rob don't do that :)
Rob : did you upload the tunnel program correctly in the Tiny before
you try to setup the GPS ? (the title of your message confuse me)
@+
Michel
2008/10/14 David Carlson <address@hidden <mailto:address@hidden>>
Rob,
You need to connect the +5 V from the USB to the VBUS pin on the
tiny. This puts the processor into "programming mode".
Buzz
Robby Smith wrote:
Hi Guys, Thanks for the great project. I connected the serial
cable to the download header using 3 wires (TX,RX,GND) and I
started UCenter but nothing happens when I upload the
configuration file.
What should I do?
Thanks
Rob
------------------------------------------------------------------------
_______________________________________________
Paparazzi-devel mailing list
address@hidden <mailto:address@hidden>
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________
Paparazzi-devel mailing list
address@hidden <mailto:address@hidden>
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
------------------------------------------------------------------------
_______________________________________________
Paparazzi-devel mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel