Re: [Paparazzi-devel] airframe *.xml and datalink

[G Roberts]

Link another booz file to the missing file.  In a terminal:

ln -s ./paparazzi3/conf/booz_s(something) ./paparazzi3/conf/booz2_a1.xml

Had this the other day, it's a pita.

--G

On 11 June 2010 15:46, Roman Nikitin <address@hidden> wrote:

Hi guys,

 

Since last time I was constrained to reinstall  OSs on my laptop. Now I am trying to get my XBee and another autopilot components working.

 

As A/C was selected MJ5 with microjet5.xml airframe file for the test. Under Session “ Flight address@hidden  (the modems set ups are the same) was selected. It worked before I reinstalled my OS, but now I have the following problem:

 

Run '/home/uav/paparazzi3/sw/ground_segment/tmtc/link  -d /dev/ttyUSB0'

Run '/home/uav/paparazzi3/sw/ground_segment/tmtc/server '

Run '/home/uav/paparazzi3/sw/ground_segment/cockpit/gcs '

Failure("Error opening modem serial device : fd < 0 (/dev/ttyUSB0)")

Broadcasting on network 127.255.255.255, port 2010

Fatal error: exception Failure("File not found: /home/uav/paparazzi3/conf/airframes/booz2_a1.xml")

Broadcasting on network 127.2

 

As I can see, the program cannot find booz2_a1.xml. Why does it look for booz2_a1.xml if GCS as an airframe is selected microjet.xml

 

And if I have a look on 3 lines for data link, Server and GCS on the top of GCS window (with the buttons Redo and Remove)  only the third one (GCS) is running,  the first to are not running because of the errors marked yellow above.

 

I wonder if somebody can help me with it.

 

Thanks you

 

Regards,

 

Roman

 

Bristol Institute of Technology

University of the West of England

Aerospace Systems Engineering

email: address@hidden

Mob.: +44 (0) 7760806643

 

 

 

_______________________________________________
Paparazzi-devel mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel