On Tue, Sep 7, 2010 at 3:36 PM, antoine drouin <
address@hidden> wrote:
> Hi Marko
>
> On Tue, Sep 7, 2010 at 3:17 PM, Marko Thaler <
address@hidden> wrote:
>> Hi Poine,
>>
>> My problems with MKK ESC freezes were caused by the paparazzi-stm32
>> toolchain package. When I built the toolchain based on your/Piotr's/Uwe's
>> script all the problems went away.
>
> did you use the script in the toolchain directory in paparazzi svn ?
> if yes, this is the version where I disabled the calls to assert_param
> in libstm32 - on the current package ( 1.0.0-3 ) assert param is an
> empty function call ( the function is defined in
> sw/airborne/stm32/stm32_vector_table.c ). It doesn't do any bad thing
> execpt slow the program alot. I2C is very sensitive to timing issue (
> I still need to improve that ). I think this is what is causing your
> problems.
>
>
>
>> Since I wanted to be certain about the cause of the problem I uninstalled
>> the self built toolchain and reinstalled the default paparazzi-stm32 deb
>> package and all the problems returned. Going back to self built toolchain
>> solved everything.
>>
>> Oh, one more question about Eclipse. When I am stepping through the code
>> line by line (while debugging), I constantly get thrown into different
>> interrupt request handlers. Where in Eclipse can I block this behaviour so
>> that you are able to step through the code without being constantly
>> interrupted by IRQs?
>
> I'm not familiar with eclipse, but I have the same behaviour when
> using gdb from the command line. I don't know if there's a way to
> "skip" that - if you don't care about interrupts during your
> particular session of debug, maybe you could just disable them by
> using gdb to write to the register
>
> Regards
>
> Poine
>
>
>> Thank you and kind regards,
>>
>> Marko
>>
>>
>> On Wed, Sep 1, 2010 at 10:15 PM, antoine drouin <
address@hidden> wrote:
>>>
>>> Hi Marko
>>>
>>> vbat is on top of my todo list
>>>
>>> On Wed, Sep 1, 2010 at 9:02 PM, Marko Thaler <
address@hidden>
>>> wrote:
>>> > Hi Poine,
>>> >
>>> > Thanks, I'll have a look at the libstm32. Since I am totally new to
>>> > hardware
>>> > driver development, I do not think I can be of any help for the I2C
>>> > code,
>>> > but I will have a look and learn a lot ;-).
>>> >
>>> > Oh, one more thing. I have noticed the vsupply battery voltage in the
>>> > Lisa
>>> > telemetry is constantly 0 dV. Is there a specific flag that must be set
>>> > for
>>> > this to work or is this going to be implemented in the future?
>>> >
>>> > Thank you and talk to you soon,
>>> >
>>> > Marko
>>>
>>
>> _______________________________________________
>> Paparazzi-devel mailing list
>>
address@hidden
>>
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>>
>>
>
_______________________________________________
Paparazzi-devel mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/paparazzi-devel