|
Hi Chrstophe,
In my case, this is done.But, I can't copy. And I know that I'm the hoot. This is mensage that returns : cp: can not stat 'conf/system/udev/rules/10-paparazzi.rules': No such file or directory
Cheers!
Date: Thu, 5 May 2011 08:25:34 +0200 From: address@hidden To: address@hidden Subject: Re: [Paparazzi-devel] How compile Lisa L Hi,
if your environment variable $PAPARAZZI_HOME is not set then you should fill in your paparazzi path manually like:
sudo cp /home/pedro/paparazzi/conf/system/udev/rules/10-paparazzi.rules /etc/udev/rules.d/
(change to your real paparazzi directory location)
When plugging in the usb, nothing visible happens, but with the proper packages installed (paparazzi-stm32) and the rules above you should be able to upload some test programs to lisa.
-Christophe
On Thu, May 5, 2011 at 5:11 AM, pedro andrade <address@hidden> wrote:
Hey Chris,
In my case, I connect the board (Lisa / L STM 32), USB cable and nothing appears!
Is this correct or is there a specific bootloader? I tried this steps up and is going wrong! I typed the following line in Terminal prompt:
$ sudo cp $ PAPARAZZI_HOME/conf/system/udev/rules/10-paparazzi.rules / etc / udev / rules.d / and the following message is returned:
cp: can not stat 'conf/system/udev/rules/10-paparazzi.rules': No such file or directory and this is exists!
In case I know that the directory is correct. I don't understand the error.
Why?
Other question is: *I need some peripheral coupled with the autopilot to compiling?
*I need to change any pre-existing file for this compiling?
Cheers!
> From: address@hidden
> To: address@hidden> Subject: Re: [Paparazzi-devel] How compile Lisa L
> > OK, I'll try :)> > Starting with the command "make AIRCRAFT=DEMO demo2.upload":
> > "make" is the GNU make program, a kind specialized interpreter for> running a program that builds software. It should be installed on your
> system (it's a paparazzi prerequisite).> > make looks for a file called Makefile, which is the actual program
> that tells it how to build the software. In our case, it runs the> Paparazzi Makefile (which is included part of the paparazzi sysem).
> This Makefile includes other files. "AIRCRAFT=DEMO demo2.upload" are> arguments that make sense to the Paparazzi Makefile.>
> AIRCRAFT=DEMO means use the aircraft configuration called "demo".> There are probably a few aircraft configurations specified in the
> conf/conf.xml. This file specifies a number of default configurations,> and you will add others as you progress. As it happens I don't have an
> aircraft called demo in my system, I just fixed the typo in the link> to the page about that.>
> The second argument "demo2.upload" is the verb, it's what you are> actually asking make to do. It means install the software (called
> demo2) onto the paparazzi autopilot hardware, (as per the appropriate> configuration).> > For the demo2.upload command to work, it has to be configured in the
> DEMO aircraft. Also, the autopilot hardware needs to be plugged into> your computer and powered up in the correct sequence so that it run's
> it's bootloader program (i.e. is ready to have software loaded onto> it). This bit of output:>
> Found USB device> BootROM code: 2.12> Part ID: 0x0402FF25 (LPC2148, 512k Flash, 32k+8k RAM)
> BootLoader version: 1.3> #> > means your computer can see the autopilot, which is running the
> bootloader, so if you get this far you are ready for step 3 :)> > What output do you get when you run "make AIRCRAFT=DEMO demo2.output"?
> Do you have a "demo" configured?> > Hope that helps.>
> Chris Gough> > On Tue, May 3, 2011 at 9:09 AM, pedro andrade <address@hidden> wrote:
> > Hey Chris,> > I would like for a detailed explanation of all the output.> > Please which means: DEMO and which means: demo2.upload (this is the file?)
> > Cheers.> >> Date: Sat, 30 Apr 2011 07:15:30 +1000> >> From: address@hidden
> >> To: address@hidden> >> Subject: Re: [Paparazzi-devel] How compile Lisa L
> >>> >> Hey Pedro,> >>> >> which bit don't you get?
> >>> >> you just type "make AIRCRAFT=DEMO demo2.upload" and check that the> >> output contains the important text, i.e. something similar to this:
> >>> >> Found USB device> >> BootROM code: 2.12> >> Part ID: 0x0402FF25 (LPC2148, 512k Flash, 32k+8k RAM)
> >> BootLoader version: 1.3> >> #> >>> >> Or are you looking for a detailed explanation of all the output?
> >>> >> Chris Gough> >>> >> On Sat, Apr 30, 2011 at 6:46 AM, pedro andrade <address@hidden>
> >> wrote:> >> > Hey World!> >> > Can somebody explain to me the "Step 2"? Link page
> >> > : http://paparazzi.enac.fr/wiki/Compiling#Step_2> >> > Cheers
> >> >> >> > _______________________________________________> >> > Paparazzi-devel mailing list
> >> > address@hidden> >> > https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> >> >> >> >> >>> >>
> >>> >> --> >> .> >>> >> _______________________________________________
> >> Paparazzi-devel mailing list> >> address@hidden
> >> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel> >
> > _______________________________________________> > Paparazzi-devel mailing list> > address@hidden
> > https://lists.nongnu.org/mailman/listinfo/paparazzi-devel> >
> >> > > > --
> .> > _______________________________________________> Paparazzi-devel mailing list
> address@hidden> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel |