Re: [Paparazzi-devel] PWM frame width

[Felix Ruess]

Hi Andreas,

it's a standard servo signal, meaning between 1ms and 2ms.
You configure this in your airframe file in the servos section for
each servo output.
http://paparazzi.enac.fr/wiki/Airframe_Configuration#Servos

Cheers, Felix

On Tue, Jun 7, 2011 at 2:25 PM, Hector Garcia de Marina
<address@hidden> wrote:
> Hello Andreas
> Usually is from 50Hz to 200Hz, it depends on the technology employed.
> Cheers,
> Héctor
>
> On Tue, Jun 7, 2011 at 2:22 PM, Andreas Gaeb <address@hidden> wrote:
>>
>> Hello everybody,
>>
>> can anybody tell me how much the PWM frame width (i.e. the time between
>> two rising edges of the signal, not the length of the duty cycle) is for
>> servos on the Tiny 2.11? Where can I find this in the code?
>>
>> Thanks in advance,
>>        Andreas
>>
>>
>>
>>
>> _______________________________________________
>> Paparazzi-devel mailing list
>> address@hidden
>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>
>
> --
> Héctor
>
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>