Re: [Paparazzi-devel] Error (dev/paparazzi/xbee)

[Pedro Andrade]

Hey Chris,

I did set up USB when I did copy "10-paparazzi.rules" for "/etc/udev/rules.d/", right?

This are the last lines of dmesg's output.

[  176.145360] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04)

[  176.145431] ata2.00: configured for UDMA/100

[  176.145858] ata2: EH complete

[  247.087787] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,commit=0

[  272.180066] lo: Disabled Privacy Extensions

[ 1173.664188] usb 6-1: new full speed USB device using uhci_hcd and address 2

[ 1173.979016] usbcore: registered new interface driver usbserial

[ 1173.979064] USB Serial support registered for generic

[ 1173.979354] usbcore: registered new interface driver usbserial_generic

[ 1173.979357] usbserial: USB Serial Driver core

[ 1174.012231] USB Serial support registered for FTDI USB Serial Device

[ 1174.012686] ftdi_sio 6-1:1.0: FTDI USB Serial Device converter detected

[ 1174.012758] usb 6-1: Detected FT232RL

[ 1174.012761] usb 6-1: Number of endpoints 2

[ 1174.012763] usb 6-1: Endpoint 1 MaxPacketSize 64

[ 1174.012766] usb 6-1: Endpoint 2 MaxPacketSize 64

[ 1174.012768] usb 6-1: Setting MaxPacketSize 64

[ 1174.014160] usb 6-1: FTDI USB Serial Device converter now attached to ttyUSB0

[ 1174.014180] usbcore: registered new interface driver ftdi_sio

[ 1174.014182] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver

    

Cheers.

> Date: Tue, 7 Jun 2011 14:41:24 +1000
> From: address@hidden
> To: address@hidden
> Subject: Re: [Paparazzi-devel] Error (dev/paparazzi/xbee)
>
> Hi Pedro,
>
> did you set up USB access?
>
> http://paparazzi.enac.fr/wiki/Installation#Setting_access_rights_for_USB_download
>
> unplug tour modem from the USB port on your computer, plug it in again
> and type "dmesg". What are the last 10 lines of dmesg's output?
>
> Chris Gough
>
> On Tue, Jun 7, 2011 at 2:20 PM, Pedro Andrade <address@hidden> wrote:
> > Hy world,
> > I'm with the problem at to run session "Flight address@hidden" sequinte
> > the error occurs.
> >  " Failure("Error opening modem serial device : fd < 0
> > (/dev/paparazzi/xbee)") "
> > Is attached hereto the print screen of the error.
> > Cheers.
> > _______________________________________________
> > Paparazzi-devel mailing list
> > address@hidden
> > https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> >
> >
>
>
>
> --
> .
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel