Re: [Paparazzi-devel] ATMMega PPM Encoder (Chris)

[Chris]

Hi.
The jumper when short circuited  supplies power to the receiver.
Usually it is not connected when someone wants to power the receiver from a separate
power supply for some reason.
The receiver will get +5v from servo input 1 usually if you have the board with the 1x10
pin header ( -  + 1  2  3  4   5  6  7   8)  or from the middle pin row if you have the one with
the 8x3 pin header
The main thing is the have the led blinking relatively fast which means that you have ppm output.
I can't see the picture and actually never was able to view any picture attachment,
when i click the attachment url i get this error message:

Not Found

The requested URL /archive/html/paparazzi-devel/attachments/20120420/2f1d4998/attachment.jpg was not found on this server.

---

Apache/2.2.14 Server at lists.nongnu.org Port 80

Hello everybody,


I am having problems with my RC link. I have been looking through and I think it may be caused by the JR1 jump. I have read about how to do it in the documentation but I guess I have a different board since the scheme there does not match my board. Could anybody please tell me where is the JR1 located in my board (see attached pic)?


I am also having troubles with the RC messages. When I click on Tools-->Messages, the servos does not respond to the sticks of the RC even though I have configured the airframe and radio file accordingly, so I guess there is something wrong. Any hint?


Thanks. 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nongnu.org/archive/html/paparazzi-devel/attachments/20120420/2f1d4998/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ATM_Mega_PPM_encoder.jpg
Type: image/jpeg
Size: 154376 bytes
Desc: not available
URL: <http://lists.nongnu.org/archive/html/paparazzi-devel/attachments/20120420/2f1d4998/attachment.jpg>