Re: [Paparazzi-devel] Problem with uploading Lisa M

[Piotr Esden-Tempski]

Hi,

When is the upload getting stuck? If it is at 0x8020000 then you may have an 
older version of the bootloader that only supported up to 128kb of flash. The 
current version on github (https://github.com/paparazzi/luftboot) will allow 
you to flash all 256kb of the available flash.

If that is the case you can follow the instructions in the wiki 
(http://paparazzi.enac.fr/wiki/Lisa/M_v20#Uploading_the_Paparazzi_USB_Bootloader)
 and update the bootloader.

It would be much nicer to actually create a payload (application) for luftboot 
that upgrades the bootloader. Then it is not necessary to use the serial 
interface if one does not have a JTAG adapter making everything much easier. :)

Cheers Piotr

--
Transition Robotics Inc.
http://transition-robotics.com
the makers of the Quadshot
Co-Founder, Embedded systems Engineer
Mobile: +1 831 440 7454
Skype: esdentem

On Aug 30, 2012, at 7:56 AM, Sergej Krukouski wrote:

> Hi guys!
> I have really strange problem with uploading Lisa M 2.0. Compilation goes 
> without any problems through, however  the upload begins with “Programming 
> memory at 0x08002000” but stucks and never ends.
> What could be a problem here?
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel