Re: [Paparazzi-devel] airframe configuration?

[Christophe De Wagter]

You can watch the values in the telemetry PPM for raw values and RC for calibrated values.

I agree about the GUI. Paparazzi has so far focused on technology more than on users but this is changing. There is already an issue-report for this.

-Christophe 

On Fri, Sep 28, 2012 at 11:04 AM, hu zhangli <address@hidden> wrote:

but we should know about the acutal val ,then fill in the xml.

firstly how to get the RC val , maybe GUI is good sensitive to teach
user . for example the GUI could show the RC throlle, yaw. range when
RC is operated by user.

Openpilot support such feature.


On Fri, Sep 28, 2012 at 5:00 PM, Christophe De Wagter

<address@hidden> wrote:
> http://paparazzi.enac.fr/wiki/Paparazzi_Center
>
> the radio file defines the ppm signals of your receiver.
>
> the airframe file defines the servo deflections
>
> -Christophe
>
>
>
>
> On Fri, Sep 28, 2012 at 10:52 AM, hu zhangli <address@hidden> wrote:
>>
>> for example if we choose ppm, how to config the related channels and
>> threshhold value setting max ...min...
>>
>> On Fri, Sep 28, 2012 at 4:09 PM, Christophe De Wagter
>> <address@hidden> wrote:
>> > Unfortunately that guide is quite outdated. Several things still apply
>> > but
>> > not the makefile part.
>> >
>> > There is no more need for Makfile in your airframe. You can configure
>> > the
>> > autpilot using firmware, board and subsystems blocks.
>> >
>> > Look at: http://paparazzi.enac.fr/wiki/Airframe_Configuration
>> >
>> > and in ./conf/airframes/examples for something that matches your
>> > hardware
>> >
>> > -Christophe
>> >
>> >
>> >
>> > On Thu, Sep 27, 2012 at 2:06 PM, iman shirdareh
>> > <address@hidden>
>> > wrote:
>> >>
>> >> Hi
>> >>
>> >> I have some problem with airframe configuration, I'm following this
>> >> guid:http://www.rcgroups.com/forums/showthread.php?t=1000937
>> >>
>> >> but I can't find funjet1.XML file and there isn't any
>> >>
>> >>  <makefile>
>> >> CONFIG = \"tiny_2_1.h\"
>> >>
>> >>
>> >> in other example file, to change that?!
>> >>
>> >> I want to use my autopilot with Cessna 182 , Is there any similar
>> >> airframe
>> >> file to use?
>> >>
>> >>
>> >>
>> >> Thanks a lot..........Iman
>> >>
>> >>
>> >> _______________________________________________
>> >> Paparazzi-devel mailing list
>> >> address@hidden
>> >> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>> >>
>> >
>> >
>> > _______________________________________________
>> > Paparazzi-devel mailing list
>> > address@hidden
>> > https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>> >
>>
>> _______________________________________________
>> Paparazzi-devel mailing list
>> address@hidden
>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel