paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] LIS302DL accelerometer on STM32F4_discovery board


From: Prof. Dr.-Ing. Heinrich Warmers
Subject: Re: [Paparazzi-devel] LIS302DL accelerometer on STM32F4_discovery board
Date: Wed, 23 Oct 2013 11:14:35 +0200
User-agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; de-DE; rv:1.4) Gecko/20030619 Netscape/7.1 (ax)

Hi Felix,
what do you think about a driver for the STM32F3?
There exists a solution for openpilot  (https://github.com/lilvinz/OpenPilot/wiki/How-to-build-the-discovery)  and pitxhawk
You need only a barometer and a GPS (currently < 14 Euro for the navilog ttl407) module  to make it.
A autopilot electronic below 50 Euro.
The new  pitxhawk use the STM MEMS sensors and the nuttx OS.

Regards

Heinrich




Felix Ruess schrieb:
Hi,

I started writing a driver for the LIS302DL accel which is on the STM32F4_discovery board.
However I can't even seem to read back the device id from the WHO_AM_I register via SPI1 and now I've run out of time that I can spend on this.
The driver is basically done, but obviously there is still an error somewhere (either in the SPI mcu_periph for SPI1 on the F4, or the lis302dl_spi driver).

If someone wants to continue on this, it is in my lis302dl branch on github:
I've added a test_lis302dl target to the stm32f4_discovery_test.xml airframe file.

Cheers, Felix

_______________________________________________ Paparazzi-devel mailing list address@hidden https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

reply via email to

[Prev in Thread] Current Thread [Next in Thread]