qemu-arm
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-arm] [PATCH v8 1/2] hw/arm: Add arm SBSA reference machine, skelet


From: Hongbo Zhang
Subject: [Qemu-arm] [PATCH v8 1/2] hw/arm: Add arm SBSA reference machine, skeleton part
Date: Sun, 23 Jun 2019 10:40:54 +0800

For the Aarch64, there is one machine 'virt', it is primarily meant to
run on KVM and execute virtualization workloads, but we need an
environment as faithful as possible to physical hardware, for supporting
firmware and OS development for pysical Aarch64 machines.

This patch introduces new machine type 'sbsa-ref' with main features:
 - Based on 'virt' machine type.
 - A new memory map.
 - CPU type cortex-a57.
 - EL2 and EL3 are enabled.
 - GIC version 3.
 - System bus AHCI controller.
 - System bus EHCI controller.
 - CDROM and hard disc on AHCI bus.
 - E1000E ethernet card on PCIE bus.
 - VGA display adaptor on PCIE bus.
 - No virtio deivces.
 - No fw_cfg device.
 - No ACPI table supplied.
 - Only minimal device tree nodes.

Arm Trusted Firmware and UEFI porting to this are done accordingly, and
it should supply ACPI tables to load OS, the minimal device tree nodes
supplied from this platform are only to pass the dynamic info reflecting
command line input to firmware, not for loading OS.

To make the review easier, this task is split into two patches, the
fundamental sceleton part and the peripheral devices part, this patch is
the first part.

Signed-off-by: Hongbo Zhang <address@hidden>
---
 default-configs/arm-softmmu.mak |   1 +
 hw/arm/Kconfig                  |  14 ++
 hw/arm/Makefile.objs            |   1 +
 hw/arm/sbsa-ref.c               | 295 ++++++++++++++++++++++++++++++++++++++++
 4 files changed, 311 insertions(+)
 create mode 100644 hw/arm/sbsa-ref.c

diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 1f2e0e7..f9fdb73 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -19,6 +19,7 @@ CONFIG_SX1=y
 CONFIG_NSERIES=y
 CONFIG_STELLARIS=y
 CONFIG_REALVIEW=y
+CONFIG_SBSA_REF=y
 CONFIG_VERSATILE=y
 CONFIG_VEXPRESS=y
 CONFIG_ZYNQ=y
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 9aced9d..d8f40ad 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -184,6 +184,20 @@ config REALVIEW
     select DS1338 # I2C RTC+NVRAM
     select USB_OHCI
 
+config SBSA_REF
+    bool
+    imply PCI_DEVICES
+    select A15MPCORE
+    select ARM_SMMUV3
+    select GPIO_KEY
+    select PCI_EXPRESS
+    select PCI_EXPRESS_GENERIC_BRIDGE
+    select PFLASH_CFI01
+    select PL011 # UART
+    select PL031 # RTC
+    select PL061 # GPIO
+    select PLATFORM_BUS
+
 config SABRELITE
     bool
     select FSL_IMX6
diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
index 994e67d..43ce8d5 100644
--- a/hw/arm/Makefile.objs
+++ b/hw/arm/Makefile.objs
@@ -19,6 +19,7 @@ obj-$(CONFIG_SPITZ) += spitz.o
 obj-$(CONFIG_TOSA) += tosa.o
 obj-$(CONFIG_Z2) += z2.o
 obj-$(CONFIG_REALVIEW) += realview.o
+obj-$(CONFIG_SBSA_REF) += sbsa-ref.o
 obj-$(CONFIG_STELLARIS) += stellaris.o
 obj-$(CONFIG_COLLIE) += collie.o
 obj-$(CONFIG_VERSATILE) += versatilepb.o
diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c
new file mode 100644
index 0000000..e68751e
--- /dev/null
+++ b/hw/arm/sbsa-ref.c
@@ -0,0 +1,295 @@
+/*
+ * ARM SBSA Reference Platform emulation
+ *
+ * Copyright (c) 2018 Linaro Limited
+ * Written by Hongbo Zhang <address@hidden>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "qemu/error-report.h"
+#include "qemu/units.h"
+#include "sysemu/numa.h"
+#include "sysemu/sysemu.h"
+#include "exec/address-spaces.h"
+#include "exec/hwaddr.h"
+#include "kvm_arm.h"
+#include "hw/arm/boot.h"
+#include "hw/boards.h"
+#include "hw/intc/arm_gicv3_common.h"
+
+#define RAMLIMIT_GB 8192
+#define RAMLIMIT_BYTES (RAMLIMIT_GB * GiB)
+
+enum {
+    SBSA_FLASH,
+    SBSA_MEM,
+    SBSA_CPUPERIPHS,
+    SBSA_GIC_DIST,
+    SBSA_GIC_REDIST,
+    SBSA_SMMU,
+    SBSA_UART,
+    SBSA_RTC,
+    SBSA_PCIE,
+    SBSA_PCIE_MMIO,
+    SBSA_PCIE_MMIO_HIGH,
+    SBSA_PCIE_PIO,
+    SBSA_PCIE_ECAM,
+    SBSA_GPIO,
+    SBSA_SECURE_UART,
+    SBSA_SECURE_UART_MM,
+    SBSA_SECURE_MEM,
+    SBSA_AHCI,
+    SBSA_EHCI,
+};
+
+typedef struct MemMapEntry {
+    hwaddr base;
+    hwaddr size;
+} MemMapEntry;
+
+typedef struct {
+    MachineState parent;
+    struct arm_boot_info bootinfo;
+    int smp_cpus;
+    void *fdt;
+    int fdt_size;
+    int psci_conduit;
+} SBSAMachineState;
+
+#define TYPE_SBSA_MACHINE   MACHINE_TYPE_NAME("sbsa-ref")
+#define SBSA_MACHINE(obj) \
+    OBJECT_CHECK(SBSAMachineState, (obj), TYPE_SBSA_MACHINE)
+
+static const MemMapEntry sbsa_ref_memmap[] = {
+    /* 512M boot ROM */
+    [SBSA_FLASH] =              {          0, 0x20000000 },
+    /* 512M secure memory */
+    [SBSA_SECURE_MEM] =         { 0x20000000, 0x20000000 },
+    /* Space reserved for CPU peripheral devices */
+    [SBSA_CPUPERIPHS] =         { 0x40000000, 0x00040000 },
+    [SBSA_GIC_DIST] =           { 0x40060000, 0x00010000 },
+    [SBSA_GIC_REDIST] =         { 0x40080000, 0x04000000 },
+    [SBSA_UART] =               { 0x60000000, 0x00001000 },
+    [SBSA_RTC] =                { 0x60010000, 0x00001000 },
+    [SBSA_GPIO] =               { 0x60020000, 0x00001000 },
+    [SBSA_SECURE_UART] =        { 0x60030000, 0x00001000 },
+    [SBSA_SECURE_UART_MM] =     { 0x60040000, 0x00001000 },
+    [SBSA_SMMU] =               { 0x60050000, 0x00020000 },
+    /* Space here reserved for more SMMUs */
+    [SBSA_AHCI] =               { 0x60100000, 0x00010000 },
+    [SBSA_EHCI] =               { 0x60110000, 0x00010000 },
+    /* Space here reserved for other devices */
+    [SBSA_PCIE_PIO] =           { 0x7fff0000, 0x00010000 },
+    /* 32-bit address PCIE MMIO space */
+    [SBSA_PCIE_MMIO] =          { 0x80000000, 0x70000000 },
+    /* 256M PCIE ECAM space */
+    [SBSA_PCIE_ECAM] =          { 0xf0000000, 0x10000000 },
+    /* ~1TB PCIE MMIO space (4GB to 1024GB boundary) */
+    [SBSA_PCIE_MMIO_HIGH] =     { 0x100000000ULL, 0xFF00000000ULL },
+    [SBSA_MEM] =                { 0x10000000000ULL, RAMLIMIT_BYTES },
+};
+
+static const int sbsa_ref_irqmap[] = {
+    [SBSA_UART] = 1,
+    [SBSA_RTC] = 2,
+    [SBSA_PCIE] = 3, /* ... to 6 */
+    [SBSA_GPIO] = 7,
+    [SBSA_SECURE_UART] = 8,
+    [SBSA_SECURE_UART_MM] = 9,
+    [SBSA_AHCI] = 10,
+    [SBSA_EHCI] = 11,
+};
+
+static void sbsa_ref_init(MachineState *machine)
+{
+    SBSAMachineState *sms = SBSA_MACHINE(machine);
+    MachineClass *mc = MACHINE_GET_CLASS(machine);
+    MemoryRegion *sysmem = get_system_memory();
+    MemoryRegion *secure_sysmem = NULL;
+    MemoryRegion *ram = g_new(MemoryRegion, 1);
+    bool firmware_loaded = bios_name || drive_get(IF_PFLASH, 0, 0);
+    const CPUArchIdList *possible_cpus;
+    int n, sbsa_max_cpus;
+
+    if (strcmp(machine->cpu_type, ARM_CPU_TYPE_NAME("cortex-a57"))) {
+        error_report("sbsa-ref: CPU type other than the built-in "
+                     "cortex-a57 not supported");
+        exit(1);
+    }
+
+    if (kvm_enabled()) {
+        error_report("sbsa-ref: KVM is not supported for this machine");
+        exit(1);
+    }
+
+    if (machine->kernel_filename && firmware_loaded) {
+        error_report("sbsa-ref: No fw_cfg device on this machine, "
+                     "so -kernel option is not supported when firmware loaded, 
"
+                     "please load OS from hard disk instead");
+        exit(1);
+    }
+
+    /*
+     * This machine has EL3 enabled, external firmware should supply PSCI
+     * implementation, so the QEMU's internal PSCI is disabled.
+     */
+    sms->psci_conduit = QEMU_PSCI_CONDUIT_DISABLED;
+
+    sbsa_max_cpus = sbsa_ref_memmap[SBSA_GIC_REDIST].size / GICV3_REDIST_SIZE;
+
+    if (max_cpus > sbsa_max_cpus) {
+        error_report("Number of SMP CPUs requested (%d) exceeds max CPUs "
+                     "supported by machine 'sbsa-ref' (%d)",
+                     max_cpus, sbsa_max_cpus);
+        exit(1);
+    }
+
+    sms->smp_cpus = smp_cpus;
+
+    if (machine->ram_size > sbsa_ref_memmap[SBSA_MEM].size) {
+        error_report("sbsa-ref: cannot model more than %dGB RAM", RAMLIMIT_GB);
+        exit(1);
+    }
+
+    secure_sysmem = g_new(MemoryRegion, 1);
+    memory_region_init(secure_sysmem, OBJECT(machine), "secure-memory",
+                       UINT64_MAX);
+    memory_region_add_subregion_overlap(secure_sysmem, 0, sysmem, -1);
+
+    possible_cpus = mc->possible_cpu_arch_ids(machine);
+    for (n = 0; n < possible_cpus->len; n++) {
+        Object *cpuobj;
+        CPUState *cs;
+
+        if (n >= smp_cpus) {
+            break;
+        }
+
+        cpuobj = object_new(possible_cpus->cpus[n].type);
+        object_property_set_int(cpuobj, possible_cpus->cpus[n].arch_id,
+                                "mp-affinity", NULL);
+
+        cs = CPU(cpuobj);
+        cs->cpu_index = n;
+
+        numa_cpu_pre_plug(&possible_cpus->cpus[cs->cpu_index], DEVICE(cpuobj),
+                          &error_fatal);
+
+        if (object_property_find(cpuobj, "reset-cbar", NULL)) {
+            object_property_set_int(cpuobj,
+                                    sbsa_ref_memmap[SBSA_CPUPERIPHS].base,
+                                    "reset-cbar", &error_abort);
+        }
+
+        object_property_set_link(cpuobj, OBJECT(sysmem), "memory",
+                                 &error_abort);
+
+        object_property_set_link(cpuobj, OBJECT(secure_sysmem),
+                                 "secure-memory", &error_abort);
+
+        object_property_set_bool(cpuobj, true, "realized", &error_fatal);
+        object_unref(cpuobj);
+    }
+
+    memory_region_allocate_system_memory(ram, NULL, "sbsa-ref.ram",
+                                         machine->ram_size);
+    memory_region_add_subregion(sysmem, sbsa_ref_memmap[SBSA_MEM].base, ram);
+
+    sms->bootinfo.ram_size = machine->ram_size;
+    sms->bootinfo.kernel_filename = machine->kernel_filename;
+    sms->bootinfo.nb_cpus = smp_cpus;
+    sms->bootinfo.board_id = -1;
+    sms->bootinfo.loader_start = sbsa_ref_memmap[SBSA_MEM].base;
+    sms->bootinfo.firmware_loaded = firmware_loaded;
+    arm_load_kernel(ARM_CPU(first_cpu), &sms->bootinfo);
+}
+
+static uint64_t sbsa_ref_cpu_mp_affinity(SBSAMachineState *sms, int idx)
+{
+    uint8_t clustersz = ARM_DEFAULT_CPUS_PER_CLUSTER;
+    return arm_cpu_mp_affinity(idx, clustersz);
+}
+
+static const CPUArchIdList *sbsa_ref_possible_cpu_arch_ids(MachineState *ms)
+{
+    SBSAMachineState *sms = SBSA_MACHINE(ms);
+    int n;
+
+    if (ms->possible_cpus) {
+        assert(ms->possible_cpus->len == max_cpus);
+        return ms->possible_cpus;
+    }
+
+    ms->possible_cpus = g_malloc0(sizeof(CPUArchIdList) +
+                                  sizeof(CPUArchId) * max_cpus);
+    ms->possible_cpus->len = max_cpus;
+    for (n = 0; n < ms->possible_cpus->len; n++) {
+        ms->possible_cpus->cpus[n].type = ms->cpu_type;
+        ms->possible_cpus->cpus[n].arch_id =
+            sbsa_ref_cpu_mp_affinity(sms, n);
+        ms->possible_cpus->cpus[n].props.has_thread_id = true;
+        ms->possible_cpus->cpus[n].props.thread_id = n;
+    }
+    return ms->possible_cpus;
+}
+
+static CpuInstanceProperties
+sbsa_ref_cpu_index_to_props(MachineState *ms, unsigned cpu_index)
+{
+    MachineClass *mc = MACHINE_GET_CLASS(ms);
+    const CPUArchIdList *possible_cpus = mc->possible_cpu_arch_ids(ms);
+
+    assert(cpu_index < possible_cpus->len);
+    return possible_cpus->cpus[cpu_index].props;
+}
+
+static int64_t
+sbsa_ref_get_default_cpu_node_id(const MachineState *ms, int idx)
+{
+    return idx % nb_numa_nodes;
+}
+
+static void sbsa_ref_class_init(ObjectClass *oc, void *data)
+{
+    MachineClass *mc = MACHINE_CLASS(oc);
+
+    mc->init = sbsa_ref_init;
+    mc->desc = "QEMU 'SBSA Reference' ARM Virtual Machine";
+    mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a57");
+    mc->max_cpus = 512;
+    mc->pci_allow_0_address = true;
+    mc->minimum_page_bits = 12;
+    mc->block_default_type = IF_IDE;
+    mc->no_cdrom = 1;
+    mc->default_ram_size = 1 * GiB;
+    mc->default_cpus = 4;
+    mc->possible_cpu_arch_ids = sbsa_ref_possible_cpu_arch_ids;
+    mc->cpu_index_to_instance_props = sbsa_ref_cpu_index_to_props;
+    mc->get_default_cpu_node_id = sbsa_ref_get_default_cpu_node_id;
+}
+
+static const TypeInfo sbsa_ref_info = {
+    .name          = TYPE_SBSA_MACHINE,
+    .parent        = TYPE_MACHINE,
+    .class_init    = sbsa_ref_class_init,
+};
+
+static void sbsa_ref_machine_init(void)
+{
+    type_register_static(&sbsa_ref_info);
+}
+
+type_init(sbsa_ref_machine_init);
-- 
2.7.4




reply via email to

[Prev in Thread] Current Thread [Next in Thread]