Re: [PATCH v2 00/10] hw/arm/raspi: Add thermal/timer, improve multicore

qemu-arm

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH v2 00/10] hw/arm/raspi: Add thermal/timer, improve multicore

From:	no-reply
Subject:	Re: [PATCH v2 00/10] hw/arm/raspi: Add thermal/timer, improve multicore address space
Date:	Fri, 18 Oct 2019 04:28:00 -0700 (PDT)

Patchew URL: https://patchew.org/QEMU/address@hidden/



Hi,

This series failed the docker-quick@centos7 build test. Please find the testing 
commands and
their output below. If you have Docker installed, you can probably reproduce it
locally.

=== TEST SCRIPT BEGIN ===
#!/bin/bash
make docker-image-centos7 V=1 NETWORK=1
time make docker-test-quick@centos7 SHOW_ENV=1 J=14 NETWORK=1
=== TEST SCRIPT END ===

  TEST    check-qtest-aarch64: tests/device-introspect-test
  TEST    iotest-qcow2: 060
**
ERROR:/tmp/qemu-test/src/tests/device-introspect-test.c:135:test_one_device: 
assertion failed (qtree_start == qtree_end): ("bus: main-system-bus\r\n  type 
System\r\n" == "bus: main-system-bus\r\n  type System\r\n  dev: 
bcm2835-peripherals, id \"\"\r\n    mmio ffffffffffffffff/0000000001000000\r\n  
dev: bcm2835_gpio, id \"\"\r\n    gpio-out \"\" 54\r\n    mmio 
ffffffffffffffff/0000000000001000\r\n    bus: sd-bus\r\n      type sd-bus\r\n  
dev: bcm2835-thermal, id \"\"\r\n  dev: bcm2835-dma, id \"\"\r\n    gpio-out 
\"sysbus-irq\" 16\r\n    mmio ffffffffffffffff/0000000000001000\r\n    mmio 
ffffffffffffffff/0000000000000100\r\n  dev: bcm2835-sdhost, id \"\"\r\n    
gpio-out \"sysbus-irq\" 1\r\n    mmio ffffffffffffffff/0000000000001000\r\n    
bus: sd-bus\r\n      type bcm2835-sdhost-bus\r\n  dev: generic-sdhci, id 
\"\"\r\n    sd-spec-version = 2 (0x2)\r\n    uhs = 0 (0x0)\r\n    capareg = 
91763892 (0x57834b4)\r\n    maxcurr = 0 (0x0)\r\n    pending-insert-quirk = 
false\r\n    dma = \"\"\r\n    bus: sd-bus\r\n      type sdhci-bus\r\n  dev: 
bcm2835-rng, id \"\"\r\n    mmio ffffffffffffffff/0000000000000010\r\n  dev: 
bcm2835-property, id \"\"\r\n    gpio-out \"sysbus-irq\" 1\r\n    board-rev = 0 
(0x0)\r\n    mmio ffffffffffffffff/0000000000000010\r\n  dev: bcm2835-fb, id 
\"\"\r\n    gpio-out \"sysbus-irq\" 1\r\n    vcram-base = 0 (0x0)\r\n    
vcram-size = 67108864 (0x4000000)\r\n    xres = 640 (0x280)\r\n    yres = 480 
(0x1e0)\r\n    bpp = 16 (0x10)\r\n    pixo = 1 (0x1)\r\n    alpha = 2 (0x2)\r\n 
   mmio ffffffffffffffff/0000000000000010\r\n  dev: bcm2835-mbox, id \"\"\r\n   
 gpio-in \"\" 9\r\n    gpio-out \"sysbus-irq\" 1\r\n    mmio 
ffffffffffffffff/0000000000000400\r\n  dev: bcm2835-aux, id \"\"\r\n    
gpio-out \"sysbus-irq\" 1\r\n    chardev = \"\"\r\n    mmio 
ffffffffffffffff/0000000000000100\r\n  dev: pl011, id \"\"\r\n    gpio-out 
\"sysbus-irq\" 6\r\n    chardev = \"\"\r\n    mmio 
ffffffffffffffff/0000000000001000\r\n  dev: bcm2835-sys-timer, id \"\"\r\n  
dev: bcm2835-ic, id \"\"\r\n    gpio-out \"sysbus-irq\" 2\r\n    gpio-in 
\"arm-irq\" 8\r\n    gpio-in \"gpu-irq\" 64\r\n    mmio 
ffffffffffffffff/0000000000000200\r\n  dev: bcm2836-control, id \"\"\r\n    
gpio-out \"fiq\" 4\r\n    gpio-out \"irq\" 4\r\n    gpio-in \"gpu-fiq\" 1\r\n   
 gpio-in \"gpu-irq\" 1\r\n    gpio-in \"cntvirq\" 4\r\n    gpio-in \"cnthpirq\" 
4\r\n    gpio-in \"cntpnsirq\" 4\r\n    gpio-in \"cntpsirq\" 4\r\n    mmio 
ffffffffffffffff/0000000000000100\r\n  dev: bcm2835-peripherals, id \"\"\r\n    
mmio ffffffffffffffff/0000000001000000\r\n  dev: bcm2835_gpio, id \"\"\r\n    
gpio-out \"\" 54\r\n    mmio ffffffffffffffff/0000000000001000\r\n    bus: 
sd-bus\r\n      type sd-bus\r\n  dev: bcm2835-thermal, id \"\"\r\n  dev: 
bcm2835-dma, id \"\"\r\n    gpio-out \"sysbus-irq\" 16\r\n    mmio 
ffffffffffffffff/0000000000001000\r\n    mmio 
ffffffffffffffff/0000000000000100\r\n  dev: bcm2835-sdhost, id \"\"\r\n    
gpio-out \"sysbus-irq\" 1\r\n    mmio ffffffffffffffff/0000000000001000\r\n    
bus: sd-bus\r\n      type bcm2835-sdhost-bus\r\n  dev: generic-sdhci, id 
\"\"\r\n    sd-spec-version = 2 (0x2)\r\n    uhs = 0 (0x0)\r\n    capareg = 
91763892 (0x57834b4)\r\n    maxcurr = 0 (0x0)\r\n    pending-insert-quirk = 
false\r\n    dma = \"\"\r\n    bus: sd-bus\r\n      type sdhci-bus\r\n  dev: 
bcm2835-rng, id \"\"\r\n    mmio ffffffffffffffff/0000000000000010\r\n  dev: 
bcm2835-property, id \"\"\r\n    gpio-out \"sysbus-irq\" 1\r\n    board-rev = 0 
(0x0)\r\n    mmio ffffffffffffffff/0000000000000010\r\n  dev: bcm2835-fb, id 
\"\"\r\n    gpio-out \"sysbus-irq\" 1\r\n    vcram-base = 0 (0x0)\r\n    
vcram-size = 67108864 (0x4000000)\r\n    xres = 640 (0x280)\r\n    yres = 480 
(0x1e0)\r\n    bpp = 16 (0x10)\r\n    pixo = 1 (0x1)\r\n    alpha = 2 (0x2)\r\n 
   mmio ffffffffffffffff/0000000000000010\r\n  dev: bcm2835-mbox, id \"\"\r\n   
 gpio-in \"\" 9\r\n    gpio-out \"sysbus-irq\" 1\r\n    mmio 
ffffffffffffffff/0000000000000400\r\n  dev: bcm2835-aux, id \"\"\r\n    
gpio-out \"sysbus-irq\" 1\r\n    chardev = \"\"\r\n    mmio 
ffffffffffffffff/0000000000000100\r\n  dev: pl011, id \"\"\r\n    gpio-out 
\"sysbus-irq\" 6\r\n    chardev = \"\"\r\n    mmio 
ffffffffffffffff/0000000000001000\r\n  dev: bcm2835-sys-timer, id \"\"\r\n  
dev: bcm2835-ic, id \"\"\r\n    gpio-out \"sysbus-irq\" 2\r\n    gpio-in 
\"arm-irq\" 8\r\n    gpio-in \"gpu-irq\" 64\r\n    mmio 
ffffffffffffffff/0000000000000200\r\n  dev: bcm2836-control, id \"\"\r\n    
gpio-out \"fiq\" 4\r\n    gpio-out \"irq\" 4\r\n    gpio-in \"gpu-fiq\" 1\r\n   
 gpio-in \"gpu-irq\" 1\r\n    gpio-in \"cntvirq\" 4\r\n    gpio-in \"cnthpirq\" 
4\r\n    gpio-in \"cntpnsirq\" 4\r\n    gpio-in \"cntpsirq\" 4\r\n    mmio 
ffffffffffffffff/0000000000000100\r\n")
ERROR - Bail out! 
ERROR:/tmp/qemu-test/src/tests/device-introspect-test.c:135:test_one_device: 
assertion failed (qtree_start == qtree_end): ("bus: main-system-bus\r\n  type 
System\r\n" == "bus: main-system-bus\r\n  type System\r\n  dev: 
bcm2835-peripherals, id \"\"\r\n    mmio ffffffffffffffff/0000000001000000\r\n  
dev: bcm2835_gpio, id \"\"\r\n    gpio-out \"\" 54\r\n    mmio 
ffffffffffffffff/0000000000001000\r\n    bus: sd-bus\r\n      type sd-bus\r\n  
dev: bcm2835-thermal, id \"\"\r\n  dev: bcm2835-dma, id \"\"\r\n    gpio-out 
\"sysbus-irq\" 16\r\n    mmio ffffffffffffffff/0000000000001000\r\n    mmio 
ffffffffffffffff/0000000000000100\r\n  dev: bcm2835-sdhost, id \"\"\r\n    
gpio-out \"sysbus-irq\" 1\r\n    mmio ffffffffffffffff/0000000000001000\r\n    
bus: sd-bus\r\n      type bcm2835-sdhost-bus\r\n  dev: generic-sdhci, id 
\"\"\r\n    sd-spec-version = 2 (0x2)\r\n    uhs = 0 (0x0)\r\n    capareg = 
91763892 (0x57834b4)\r\n    maxcurr = 0 (0x0)\r\n    pending-insert-quirk = 
false\r\n    dma = \"\"\r\n    bus: sd-bus\r\n      type sdhci-bus\r\n  dev: 
bcm2835-rng, id \"\"\r\n    mmio ffffffffffffffff/0000000000000010\r\n  dev: 
bcm2835-property, id \"\"\r\n    gpio-out \"sysbus-irq\" 1\r\n    board-rev = 0 
(0x0)\r\n    mmio ffffffffffffffff/0000000000000010\r\n  dev: bcm2835-fb, id 
\"\"\r\n    gpio-out \"sysbus-irq\" 1\r\n    vcram-base = 0 (0x0)\r\n    
vcram-size = 67108864 (0x4000000)\r\n    xres = 640 (0x280)\r\n    yres = 480 
(0x1e0)\r\n    bpp = 16 (0x10)\r\n    pixo = 1 (0x1)\r\n    alpha = 2 (0x2)\r\n 
   mmio ffffffffffffffff/0000000000000010\r\n  dev: bcm2835-mbox, id \"\"\r\n   
 gpio-in \"\" 9\r\n    gpio-out \"sysbus-irq\" 1\r\n    mmio 
ffffffffffffffff/0000000000000400\r\n  dev: bcm2835-aux, id \"\"\r\n    
gpio-out \"sysbus-irq\" 1\r\n    chardev = \"\"\r\n    mmio 
ffffffffffffffff/0000000000000100\r\n  dev: pl011, id \"\"\r\n    gpio-out 
\"sysbus-irq\" 6\r\n    chardev = \"\"\r\n    mmio 
ffffffffffffffff/0000000000001000\r\n  dev: bcm2835-sys-timer, id \"\"\r\n  
dev: bcm2835-ic, id \"\"\r\n    gpio-out \"sysbus-irq\" 2\r\n    gpio-in 
\"arm-irq\" 8\r\n    gpio-in \"gpu-irq\" 64\r\n    mmio 
ffffffffffffffff/0000000000000200\r\n  dev: bcm2836-control, id \"\"\r\n    
gpio-out \"fiq\" 4\r\n    gpio-out \"irq\" 4\r\n    gpio-in \"gpu-fiq\" 1\r\n   
 gpio-in \"gpu-irq\" 1\r\n    gpio-in \"cntvirq\" 4\r\n    gpio-in \"cnthpirq\" 
4\r\n    gpio-in \"cntpnsirq\" 4\r\n    gpio-in \"cntpsirq\" 4\r\n    mmio 
ffffffffffffffff/0000000000000100\r\n  dev: bcm2835-peripherals, id \"\"\r\n    
mmio ffffffffffffffff/0000000001000000\r\n  dev: bcm2835_gpio, id \"\"\r\n    
gpio-out \"\" 54\r\n    mmio ffffffffffffffff/0000000000001000\r\n    bus: 
sd-bus\r\n      type sd-bus\r\n  dev: bcm2835-thermal, id \"\"\r\n  dev: 
bcm2835-dma, id \"\"\r\n    gpio-out \"sysbus-irq\" 16\r\n    mmio 
ffffffffffffffff/0000000000001000\r\n    mmio 
ffffffffffffffff/0000000000000100\r\n  dev: bcm2835-sdhost, id \"\"\r\n    
gpio-out \"sysbus-irq\" 1\r\n    mmio ffffffffffffffff/0000000000001000\r\n    
bus: sd-bus\r\n      type bcm2835-sdhost-bus\r\n  dev: generic-sdhci, id 
\"\"\r\n    sd-spec-version = 2 (0x2)\r\n    uhs = 0 (0x0)\r\n    capareg = 
91763892 (0x57834b4)\r\n    maxcurr = 0 (0x0)\r\n    pending-insert-quirk = 
false\r\n    dma = \"\"\r\n    bus: sd-bus\r\n      type sdhci-bus\r\n  dev: 
bcm2835-rng, id \"\"\r\n    mmio ffffffffffffffff/0000000000000010\r\n  dev: 
bcm2835-property, id \"\"\r\n    gpio-out \"sysbus-irq\" 1\r\n    board-rev = 0 
(0x0)\r\n    mmio ffffffffffffffff/0000000000000010\r\n  dev: bcm2835-fb, id 
\"\"\r\n    gpio-out \"sysbus-irq\" 1\r\n    vcram-base = 0 (0x0)\r\n    
vcram-size = 67108864 (0x4000000)\r\n    xres = 640 (0x280)\r\n    yres = 480 
(0x1e0)\r\n    bpp = 16 (0x10)\r\n    pixo = 1 (0x1)\r\n    alpha = 2 (0x2)\r\n 
   mmio ffffffffffffffff/0000000000000010\r\n  dev: bcm2835-mbox, id \"\"\r\n   
 gpio-in \"\" 9\r\n    gpio-out \"sysbus-irq\" 1\r\n    mmio 
ffffffffffffffff/0000000000000400\r\n  dev: bcm2835-aux, id \"\"\r\n    
gpio-out \"sysbus-irq\" 1\r\n    chardev = \"\"\r\n    mmio 
ffffffffffffffff/0000000000000100\r\n  dev: pl011, id \"\"\r\n    gpio-out 
\"sysbus-irq\" 6\r\n    chardev = \"\"\r\n    mmio 
ffffffffffffffff/0000000000001000\r\n  dev: bcm2835-sys-timer, id \"\"\r\n  
dev: bcm2835-ic, id \"\"\r\n    gpio-out \"sysbus-irq\" 2\r\n    gpio-in 
\"arm-irq\" 8\r\n    gpio-in \"gpu-irq\" 64\r\n    mmio 
ffffffffffffffff/0000000000000200\r\n  dev: bcm2836-control, id \"\"\r\n    
gpio-out \"fiq\" 4\r\n    gpio-out \"irq\" 4\r\n    gpio-in \"gpu-fiq\" 1\r\n   
 gpio-in \"gpu-irq\" 1\r\n    gpio-in \"cntvirq\" 4\r\n    gpio-in \"cnthpirq\" 
4\r\n    gpio-in \"cntpnsirq\" 4\r\n    gpio-in \"cntpsirq\" 4\r\n    mmio 
ffffffffffffffff/0000000000000100\r\n")
make: *** [check-qtest-aarch64] Error 1
make: *** Waiting for unfinished jobs....
Could not access KVM kernel module: No such file or directory
qemu-system-x86_64: failed to initialize KVM: No such file or directory
---
    raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['sudo', '-n', 'docker', 'run', 
'--label', 'com.qemu.instance.uuid=92383140a09d4fbca2233e2841d5852e', '-u', 
'1001', '--security-opt', 'seccomp=unconfined', '--rm', '-e', 'TARGET_LIST=', 
'-e', 'EXTRA_CONFIGURE_OPTS=', '-e', 'V=', '-e', 'J=14', '-e', 'DEBUG=', '-e', 
'SHOW_ENV=1', '-e', 'CCACHE_DIR=/var/tmp/ccache', '-v', 
'/home/patchew/.cache/qemu-docker-ccache:/var/tmp/ccache:z', '-v', 
'/var/tmp/patchew-tester-tmp-nmtjk1iu/src/docker-src.2019-10-18-07.15.26.25682:/var/tmp/qemu:z,ro',
 'qemu:centos7', '/var/tmp/qemu/run', 'test-quick']' returned non-zero exit 
status 2.
filter=--filter=label=com.qemu.instance.uuid=92383140a09d4fbca2233e2841d5852e
make[1]: *** [docker-run] Error 1
make[1]: Leaving directory `/var/tmp/patchew-tester-tmp-nmtjk1iu/src'
make: *** [docker-run-test-quick@centos7] Error 2

real    12m33.047s
user    0m8.541s


The full log is available at
http://patchew.org/logs/address@hidden/testing.docker-quick@centos7/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to address@hidden

[Prev in Thread]

Current Thread

[Next in Thread]

[PATCH v2 04/10] hw/arm/bcm2835_peripherals: Use the SYS_timer, (continued)
- [PATCH v2 04/10] hw/arm/bcm2835_peripherals: Use the SYS_timer, Philippe Mathieu-Daudé, 2019/10/17
  - Re: [PATCH v2 04/10] hw/arm/bcm2835_peripherals: Use the SYS_timer, Alistair Francis, 2019/10/17
- [PATCH v2 05/10] hw/arm/bcm2836: Make the SoC code modular, Philippe Mathieu-Daudé, 2019/10/17
- [PATCH v2 06/10] hw/arm/bcm2836: Create VideoCore address space in the SoC, Philippe Mathieu-Daudé, 2019/10/17
  - Re: [PATCH v2 06/10] hw/arm/bcm2836: Create VideoCore address space in the SoC, Philippe Mathieu-Daudé, 2019/10/18
  - Re: [PATCH v2 06/10] hw/arm/bcm2836: Create VideoCore address space in the SoC, Richard Henderson, 2019/10/19
- [PATCH v2 08/10] hw/arm/raspi: Use AddressSpace when using arm_boot::write_secondary_boot, Philippe Mathieu-Daudé, 2019/10/17
- [PATCH v2 07/10] hw/arm/bcm2836: Use per CPU address spaces, Philippe Mathieu-Daudé, 2019/10/17
- [PATCH v2 10/10] hw/arm/highbank: Use AddressSpace when using write_secondary_boot(), Philippe Mathieu-Daudé, 2019/10/17
- [PATCH v2 09/10] hw/arm/raspi: Make the board code modular, Philippe Mathieu-Daudé, 2019/10/17
- Re: [PATCH v2 00/10] hw/arm/raspi: Add thermal/timer, improve multicore address space, no-reply <=

Prev by Date: Re: [PATCH v2 06/10] hw/arm/bcm2836: Create VideoCore address space in the SoC
Next by Date: Re: [PATCH v1 0/5] target/arm/kvm: Provide an option to adjust virtual time
Previous by thread: [PATCH v2 09/10] hw/arm/raspi: Make the board code modular
Next by thread: [PATCH] hw/timer/exynos4210_mct: Initialize ptimer before starting it
Index(es):
- Date
- Thread