[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH 43/44] Add missed BCM2835 properties
|
From: |
Sergey Kambalin |
|
Subject: |
[PATCH 43/44] Add missed BCM2835 properties |
|
Date: |
Wed, 26 Jul 2023 16:25:11 +0300 |
Signed-off-by: Sergey Kambalin <sergey.kambalin@auriga.com>
---
hw/misc/bcm2835_property.c | 170 ++++++++++++++++++++++++++
include/hw/misc/raspberrypi-fw-defs.h | 11 ++
2 files changed, 181 insertions(+)
diff --git a/hw/misc/bcm2835_property.c b/hw/misc/bcm2835_property.c
index 4ed9faa54a..7d2d6e518d 100644
--- a/hw/misc/bcm2835_property.c
+++ b/hw/misc/bcm2835_property.c
@@ -19,6 +19,31 @@
#include "trace.h"
#include "hw/arm/raspi_platform.h"
+#define RPI_EXP_GPIO_BASE 128
+#define VC4_GPIO_EXPANDER_COUNT 8
+#define VCHI_BUSADDR_SIZE sizeof(uint32_t)
+
+struct vc4_display_settings_t {
+ uint32_t display_num;
+ uint32_t width;
+ uint32_t height;
+ uint32_t depth;
+ uint16_t pitch;
+ uint32_t virtual_width;
+ uint32_t virtual_height;
+ uint16_t virtual_width_offset;
+ uint32_t virtual_height_offset;
+ unsigned long fb_bus_address;
+} QEMU_PACKED;
+
+struct vc4_gpio_expander_t {
+ uint32_t direction;
+ uint32_t polarity;
+ uint32_t term_en;
+ uint32_t term_pull_up;
+ uint32_t state;
+} vc4_gpio_expander[VC4_GPIO_EXPANDER_COUNT];
+
/* https://github.com/raspberrypi/firmware/wiki/Mailbox-property-interface */
static void bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value)
@@ -30,6 +55,7 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState
*s, uint32_t value)
uint32_t tmp;
int n;
uint32_t offset, length, color;
+ uint32_t gpio_num;
/*
* Copy the current state of the framebuffer config; we will update
@@ -138,6 +164,13 @@ static void
bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value)
resplen = 8;
break;
+ case RPI_FWREQ_GET_CLOCKS:
+ /* TODO: add more clock IDs if needed */
+ stl_le_phys(&s->dma_as, value + 12, 0);
+ stl_le_phys(&s->dma_as, value + 16, RPI_FIRMWARE_ARM_CLK_ID);
+ resplen = 8;
+ break;
+
case RPI_FWREQ_SET_CLOCK_RATE:
case RPI_FWREQ_SET_MAX_CLOCK_RATE:
case RPI_FWREQ_SET_MIN_CLOCK_RATE:
@@ -276,6 +309,7 @@ static void bcm2835_property_mbox_push(BCM2835PropertyState
*s, uint32_t value)
stl_le_phys(&s->dma_as, value + 12, 0);
resplen = 4;
break;
+
case RPI_FWREQ_FRAMEBUFFER_GET_NUM_DISPLAYS:
stl_le_phys(&s->dma_as, value + 12, 1);
resplen = 4;
@@ -301,6 +335,142 @@ static void
bcm2835_property_mbox_push(BCM2835PropertyState *s, uint32_t value)
resplen);
break;
+ case RPI_FWREQ_GET_THROTTLED:
+ stl_le_phys(&s->dma_as, value + 12, 0);
+ resplen = 4;
+ break;
+
+ case RPI_FWREQ_FRAMEBUFFER_GET_DISPLAY_SETTINGS:
+ stl_le_phys(&s->dma_as, value + 12, 0); /* display_num */
+ stl_le_phys(&s->dma_as, value + 16, 800); /* width */
+ stl_le_phys(&s->dma_as, value + 20, 600); /* height */
+ stl_le_phys(&s->dma_as, value + 24, 32); /* depth */
+ stl_le_phys(&s->dma_as, value + 28, 32); /* pitch */
+ stl_le_phys(&s->dma_as, value + 30, 0); /* virtual_width */
+ stl_le_phys(&s->dma_as, value + 34, 0); /* virtual_height */
+ stl_le_phys(&s->dma_as, value + 38, 0); /* virtual_width_offset */
+ stl_le_phys(&s->dma_as, value + 40, 0); /* virtual_height_offset */
+ stl_le_phys(&s->dma_as, value + 44, 0); /* fb_bus_address low */
+ stl_le_phys(&s->dma_as, value + 48, 0); /* fb_bus_address hi */
+ resplen = sizeof(struct vc4_display_settings_t);
+ break;
+
+ case RPI_FWREQ_FRAMEBUFFER_SET_PITCH:
+ resplen = 0;
+ break;
+
+ case RPI_FWREQ_GET_GPIO_CONFIG:
+ if (ldl_le_phys(&s->dma_as, value + 12) < RPI_EXP_GPIO_BASE) {
+ qemu_log_mask(LOG_UNIMP, "RPI_FWREQ_GET_GPIO_CONFIG "
+ "not implemented for gpiochip0\n");
+ } else {
+ gpio_num = ldl_le_phys(&s->dma_as, value + 12)
+ - RPI_EXP_GPIO_BASE;
+
+ if (gpio_num < VC4_GPIO_EXPANDER_COUNT) {
+ stl_le_phys(&s->dma_as, value + 16,
+ vc4_gpio_expander[gpio_num].direction);
+ stl_le_phys(&s->dma_as, value + 20,
+ vc4_gpio_expander[gpio_num].polarity);
+ stl_le_phys(&s->dma_as, value + 24,
+ vc4_gpio_expander[gpio_num].term_en);
+ stl_le_phys(&s->dma_as, value + 28,
+ vc4_gpio_expander[gpio_num].term_pull_up);
+ /* must be equal 0 */
+ stl_le_phys(&s->dma_as, value + 12, 0);
+ resplen = 4 * 5;
+ } else {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "RPI_FWREQ_GET_GPIO_CONFIG "
+ "gpio num must be < %d",
+ RPI_EXP_GPIO_BASE + VC4_GPIO_EXPANDER_COUNT);
+ }
+ }
+ break;
+
+ case RPI_FWREQ_SET_GPIO_CONFIG:
+ if (ldl_le_phys(&s->dma_as, value + 12) < RPI_EXP_GPIO_BASE) {
+ qemu_log_mask(LOG_UNIMP, "RPI_FWREQ_SET_GPIO_CONFIG "
+ "not implemented for gpiochip0\n");
+ } else {
+ gpio_num = ldl_le_phys(&s->dma_as, value + 12)
+ - RPI_EXP_GPIO_BASE;
+
+ if (gpio_num < VC4_GPIO_EXPANDER_COUNT) {
+ vc4_gpio_expander[gpio_num].direction =
+ ldl_le_phys(&s->dma_as, value + 16);
+ vc4_gpio_expander[gpio_num].polarity =
+ ldl_le_phys(&s->dma_as, value + 20);
+ vc4_gpio_expander[gpio_num].term_en =
+ ldl_le_phys(&s->dma_as, value + 24);
+ vc4_gpio_expander[gpio_num].term_pull_up =
+ ldl_le_phys(&s->dma_as, value + 28);
+ vc4_gpio_expander[gpio_num].state =
+ ldl_le_phys(&s->dma_as, value + 32);
+ /* must be equal 0 */
+ stl_le_phys(&s->dma_as, value + 12, 0);
+ resplen = 4;
+ } else {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "RPI_FWREQ_SET_GPIO_CONFIG "
+ "gpio num must be < %d",
+ RPI_EXP_GPIO_BASE + VC4_GPIO_EXPANDER_COUNT);
+ }
+ }
+ break;
+
+ case RPI_FWREQ_GET_GPIO_STATE:
+ if (ldl_le_phys(&s->dma_as, value + 12) < RPI_EXP_GPIO_BASE) {
+ qemu_log_mask(LOG_UNIMP, "RPI_FWREQ_GET_GPIO_STATE "
+ "not implemented for gpiochip0\n");
+ } else {
+ gpio_num = ldl_le_phys(&s->dma_as, value + 12)
+ - RPI_EXP_GPIO_BASE;
+
+ if (gpio_num < VC4_GPIO_EXPANDER_COUNT) {
+ stl_le_phys(&s->dma_as, value + 16,
+ vc4_gpio_expander[gpio_num].state);
+ /* must be equal 0 */
+ stl_le_phys(&s->dma_as, value + 12, 0);
+ resplen = 8;
+ } else {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "RPI_FWREQ_GET_GPIO_STATE "
+ "gpio num must be < %d",
+ RPI_EXP_GPIO_BASE + VC4_GPIO_EXPANDER_COUNT);
+ }
+ }
+ break;
+
+ case RPI_FWREQ_SET_GPIO_STATE:
+ if (ldl_le_phys(&s->dma_as, value + 12) < RPI_EXP_GPIO_BASE) {
+ qemu_log_mask(LOG_UNIMP, "RPI_FWREQ_SET_GPIO_STATE not "
+ "implemented for gpiochip0\n");
+ } else {
+ gpio_num = ldl_le_phys(&s->dma_as, value + 12)
+ - RPI_EXP_GPIO_BASE;
+
+ if (gpio_num < VC4_GPIO_EXPANDER_COUNT) {
+ vc4_gpio_expander[gpio_num].state = ldl_le_phys(&s->dma_as,
+ value +
16);
+ /* must be equal 0 */
+ stl_le_phys(&s->dma_as, value + 12, 0);
+ resplen = 4;
+ } else {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "RPI_FWREQ_SET_GPIO_STATE "
+ "gpio num must be < %d",
+ RPI_EXP_GPIO_BASE + VC4_GPIO_EXPANDER_COUNT);
+ }
+ }
+ break;
+
+ case RPI_FWREQ_VCHIQ_INIT:
+ stl_le_phys(&s->dma_as,
+ value + offsetof(rpi_firmware_prop_request_t, payload),
+ 0);
+ resplen = VCHI_BUSADDR_SIZE;
+ break;
default:
qemu_log_mask(LOG_UNIMP,
"bcm2835_property: unhandled tag 0x%08x\n", tag);
diff --git a/include/hw/misc/raspberrypi-fw-defs.h
b/include/hw/misc/raspberrypi-fw-defs.h
index 4551fe7450..d461b30749 100644
--- a/include/hw/misc/raspberrypi-fw-defs.h
+++ b/include/hw/misc/raspberrypi-fw-defs.h
@@ -160,4 +160,15 @@ enum rpi_firmware_clk_id {
RPI_FIRMWARE_NUM_CLK_ID,
};
+struct rpi_firmware_property_tag_header {
+ uint32_t tag;
+ uint32_t buf_size;
+ uint32_t req_resp_size;
+};
+
+typedef struct rpi_firmware_prop_request {
+ struct rpi_firmware_property_tag_header hdr;
+ uint8_t payload[0];
+} rpi_firmware_prop_request_t;
+
#endif /* INCLUDE_HW_MISC_RASPBERRYPI_FW_DEFS_H_ */
--
2.34.1
- [PATCH 28/44] Impl GENET register ops., (continued)
- [PATCH 28/44] Impl GENET register ops., Sergey Kambalin, 2023/07/26
- [PATCH 32/44] Enable BCM2838 GENET controller, Sergey Kambalin, 2023/07/26
- [PATCH 31/44] Impl GENET RX path, Sergey Kambalin, 2023/07/26
- [PATCH 33/44] Connect RNG200, PCIE and GENET to GIC, Sergey Kambalin, 2023/07/26
- [PATCH 37/44] Add mailbox tests tags. Part 1, Sergey Kambalin, 2023/07/26
- [PATCH 36/44] Add mailbox test constants, Sergey Kambalin, 2023/07/26
- [PATCH 39/44] Add mailbox tests tags. Part 3, Sergey Kambalin, 2023/07/26
- [PATCH 40/44] Add mailbox property tests. Part 1, Sergey Kambalin, 2023/07/26
- [PATCH 41/44] Add mailbox property tests. Part 2, Sergey Kambalin, 2023/07/26
- [PATCH 42/44] Add mailbox property tests. Part 3, Sergey Kambalin, 2023/07/26
- [PATCH 43/44] Add missed BCM2835 properties,
Sergey Kambalin <=
- [PATCH 17/44] Add RNG200 skeleton, Sergey Kambalin, 2023/07/26
- [PATCH 22/44] Add GENET stub, Sergey Kambalin, 2023/07/26
- [PATCH 25/44] Add GENET register structs. Part 3, Sergey Kambalin, 2023/07/26
- [PATCH 34/44] Add Rpi4b boot tests, Sergey Kambalin, 2023/07/26
- [PATCH 44/44] Append added properties to mailbox test, Sergey Kambalin, 2023/07/26