[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v6 06/10] hw/fsi: Aspeed APB2OPB interface
|
From: |
Cédric Le Goater |
|
Subject: |
Re: [PATCH v6 06/10] hw/fsi: Aspeed APB2OPB interface |
|
Date: |
Tue, 24 Oct 2023 09:46:11 +0200 |
|
User-agent: |
Mozilla Thunderbird |
On 10/21/23 23:17, Ninad Palsule wrote:
This is a part of patchset where IBM's Flexible Service Interface is
introduced.
An APB-to-OPB bridge enabling access to the OPB from the ARM core in
the AST2600. Hardware limitations prevent the OPB from being directly
mapped into APB, so all accesses are indirect through the bridge.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
---
v2:
- Incorporated review comments by Joel
v3:
- Incorporated review comments by Thomas Huth
v4:
- Compile FSI with ASPEED_SOC only.
v5:
- Incorporated review comments by Cedric.
v6:
- Incorporated review comments by Cedric.
---
include/hw/fsi/aspeed-apb2opb.h | 33 ++++
hw/fsi/aspeed-apb2opb.c | 280 ++++++++++++++++++++++++++++++++
hw/arm/Kconfig | 1 +
hw/fsi/Kconfig | 4 +
hw/fsi/meson.build | 1 +
hw/fsi/trace-events | 2 +
6 files changed, 321 insertions(+)
create mode 100644 include/hw/fsi/aspeed-apb2opb.h
create mode 100644 hw/fsi/aspeed-apb2opb.c
diff --git a/include/hw/fsi/aspeed-apb2opb.h b/include/hw/fsi/aspeed-apb2opb.h
new file mode 100644
index 0000000000..a81ae67023
--- /dev/null
+++ b/include/hw/fsi/aspeed-apb2opb.h
@@ -0,0 +1,33 @@
+/*
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ * Copyright (C) 2023 IBM Corp.
+ *
+ * ASPEED APB2OPB Bridge
+ */
+#ifndef FSI_ASPEED_APB2OPB_H
+#define FSI_ASPEED_APB2OPB_H
+
+#include "hw/sysbus.h"
+#include "hw/fsi/opb.h"
+
+#define TYPE_ASPEED_APB2OPB "aspeed.apb2opb"
+OBJECT_DECLARE_SIMPLE_TYPE(AspeedAPB2OPBState, ASPEED_APB2OPB)
+
+#define ASPEED_APB2OPB_NR_REGS ((0xe8 >> 2) + 1)
+
+#define ASPEED_FSI_NUM 2
+
+typedef struct AspeedAPB2OPBState {
+ /*< private >*/
+ SysBusDevice parent_obj;
+
+ /*< public >*/
+ MemoryRegion iomem;
+
+ uint32_t regs[ASPEED_APB2OPB_NR_REGS];
+ qemu_irq irq;
+
+ OPBus opb[ASPEED_FSI_NUM];
+} AspeedAPB2OPBState;
+
+#endif /* FSI_ASPEED_APB2OPB_H */
diff --git a/hw/fsi/aspeed-apb2opb.c b/hw/fsi/aspeed-apb2opb.c
new file mode 100644
index 0000000000..6f97a6bc7d
--- /dev/null
+++ b/hw/fsi/aspeed-apb2opb.c
@@ -0,0 +1,280 @@
+/*
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ * Copyright (C) 2023 IBM Corp.
+ *
+ * ASPEED APB-OPB FSI interface
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "qom/object.h"
+#include "qapi/error.h"
+#include "trace.h"
+
+#include "hw/fsi/aspeed-apb2opb.h"
+#include "hw/qdev-core.h"
+
+#define TO_REG(x) (x >> 2)
+#define GENMASK(t, b) (((1ULL << ((t) + 1)) - 1) & ~((1ULL << (b)) - 1))
+
+#define APB2OPB_VERSION TO_REG(0x00)
+#define APB2OPB_VERSION_VER GENMASK(7, 0)
+
+#define APB2OPB_TRIGGER TO_REG(0x04)
+#define APB2OPB_TRIGGER_EN BIT(0)
+
+#define APB2OPB_CONTROL TO_REG(0x08)
+#define APB2OPB_CONTROL_OFF GENMASK(31, 13)
+
+#define APB2OPB_OPB2FSI TO_REG(0x0c)
+#define APB2OPB_OPB2FSI_OFF GENMASK(31, 22)
+
+#define APB2OPB_OPB0_SEL TO_REG(0x10)
+#define APB2OPB_OPB1_SEL TO_REG(0x28)
+#define APB2OPB_OPB_SEL_EN BIT(0)
+
+#define APB2OPB_OPB0_MODE TO_REG(0x14)
+#define APB2OPB_OPB1_MODE TO_REG(0x2c)
+#define APB2OPB_OPB_MODE_RD BIT(0)
+
+#define APB2OPB_OPB0_XFER TO_REG(0x18)
+#define APB2OPB_OPB1_XFER TO_REG(0x30)
+#define APB2OPB_OPB_XFER_FULL BIT(1)
+#define APB2OPB_OPB_XFER_HALF BIT(0)
+
+#define APB2OPB_OPB0_ADDR TO_REG(0x1c)
+#define APB2OPB_OPB0_WRITE_DATA TO_REG(0x20)
+
+#define APB2OPB_OPB1_ADDR TO_REG(0x34)
+#define APB2OPB_OPB1_WRITE_DATA TO_REG(0x38)
+
+#define APB2OPB_IRQ_STS TO_REG(0x48)
+#define APB2OPB_IRQ_STS_OPB1_TX_ACK BIT(17)
+#define APB2OPB_IRQ_STS_OPB0_TX_ACK BIT(16)
+
+#define APB2OPB_OPB0_WRITE_WORD_ENDIAN TO_REG(0x4c)
+#define APB2OPB_OPB0_WRITE_WORD_ENDIAN_BE 0x0011101b
+#define APB2OPB_OPB0_WRITE_BYTE_ENDIAN TO_REG(0x50)
+#define APB2OPB_OPB0_WRITE_BYTE_ENDIAN_BE 0x0c330f3f
+#define APB2OPB_OPB1_WRITE_WORD_ENDIAN TO_REG(0x54)
+#define APB2OPB_OPB1_WRITE_BYTE_ENDIAN TO_REG(0x58)
+#define APB2OPB_OPB0_READ_BYTE_ENDIAN TO_REG(0x5c)
+#define APB2OPB_OPB1_READ_BYTE_ENDIAN TO_REG(0x60)
+#define APB2OPB_OPB0_READ_WORD_ENDIAN_BE 0x00030b1b
+
+#define APB2OPB_OPB0_READ_DATA TO_REG(0x84)
+#define APB2OPB_OPB1_READ_DATA TO_REG(0x90)
+
+/*
+ * The following magic values came from AST2600 data sheet
+ * The register values are defined under section "FSI controller"
+ * as initial values.
+ */
+static const uint32_t aspeed_apb2opb_reset[ASPEED_APB2OPB_NR_REGS] = {
+ [APB2OPB_VERSION] = 0x000000a1,
+ [APB2OPB_OPB0_WRITE_WORD_ENDIAN] = 0x0044eee4,
+ [APB2OPB_OPB0_WRITE_BYTE_ENDIAN] = 0x0055aaff,
+ [APB2OPB_OPB1_WRITE_WORD_ENDIAN] = 0x00117717,
+ [APB2OPB_OPB1_WRITE_BYTE_ENDIAN] = 0xffaa5500,
+ [APB2OPB_OPB0_READ_BYTE_ENDIAN] = 0x0044eee4,
+ [APB2OPB_OPB1_READ_BYTE_ENDIAN] = 0x00117717
+};
+
+static uint64_t fsi_aspeed_apb2opb_read(void *opaque, hwaddr addr,
+ unsigned size)
+{
+ AspeedAPB2OPBState *s = ASPEED_APB2OPB(opaque);
+
+ trace_fsi_aspeed_apb2opb_read(addr, size);
+
+ if (addr + size > sizeof(s->regs)) {
hmm, the parameter 'size' is a memop transaction size not an address offset.
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Out of bounds read: 0x%"HWADDR_PRIx" for %u\n",
+ __func__, addr, size);
+ return 0;
+ }
+
+ return s->regs[TO_REG(addr)];
+}
+
+static void fsi_aspeed_apb2opb_write(void *opaque, hwaddr addr, uint64_t data,
+ unsigned size)
+{
+ AspeedAPB2OPBState *s = ASPEED_APB2OPB(opaque);
+
+ trace_fsi_aspeed_apb2opb_write(addr, size, data);
+
+ if (addr + size > sizeof(s->regs)) {
same comment.
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Out of bounds write: %"HWADDR_PRIx" for %u\n",
+ __func__, addr, size);
+ return;
+ }
+
+ switch (TO_REG(addr)) {
+ case APB2OPB_CONTROL:
+ fsi_opb_fsi_master_address(&s->opb[0], data & APB2OPB_CONTROL_OFF);
fsi_opb_fsi_master_address() should statically defined in this file
+ break;
+ case APB2OPB_OPB2FSI:
+ fsi_opb_opb2fsi_address(&s->opb[0], data & APB2OPB_OPB2FSI_OFF);
same for fsi_opb_opb2fsi_address()
+ break;
+ case APB2OPB_OPB0_WRITE_WORD_ENDIAN:
+ if (data != APB2OPB_OPB0_WRITE_WORD_ENDIAN_BE) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Bridge needs to be driven as BE (0x%x)\n",
+ __func__, APB2OPB_OPB0_WRITE_WORD_ENDIAN_BE);
+ }
+ break;
+ case APB2OPB_OPB0_WRITE_BYTE_ENDIAN:
+ if (data != APB2OPB_OPB0_WRITE_BYTE_ENDIAN_BE) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Bridge needs to be driven as BE (0x%x)\n",
+ __func__, APB2OPB_OPB0_WRITE_BYTE_ENDIAN_BE);
+ }
+ break;
+ case APB2OPB_OPB0_READ_BYTE_ENDIAN:
+ if (data != APB2OPB_OPB0_READ_WORD_ENDIAN_BE) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Bridge needs to be driven as BE (0x%x)\n",
+ __func__, APB2OPB_OPB0_READ_WORD_ENDIAN_BE);
+ }
+ break;
+ case APB2OPB_TRIGGER:
+ {
+ uint32_t opb, op_mode, op_size, op_addr, op_data;
+
+ assert((s->regs[APB2OPB_OPB0_SEL] & APB2OPB_OPB_SEL_EN) ^
+ (s->regs[APB2OPB_OPB1_SEL] & APB2OPB_OPB_SEL_EN));
+
+ if (s->regs[APB2OPB_OPB0_SEL] & APB2OPB_OPB_SEL_EN) {
+ opb = 0;
+ op_mode = s->regs[APB2OPB_OPB0_MODE];
+ op_size = s->regs[APB2OPB_OPB0_XFER];
+ op_addr = s->regs[APB2OPB_OPB0_ADDR];
+ op_data = s->regs[APB2OPB_OPB0_WRITE_DATA];
+ } else if (s->regs[APB2OPB_OPB1_SEL] & APB2OPB_OPB_SEL_EN) {
+ opb = 1;
+ op_mode = s->regs[APB2OPB_OPB1_MODE];
+ op_size = s->regs[APB2OPB_OPB1_XFER];
+ op_addr = s->regs[APB2OPB_OPB1_ADDR];
+ op_data = s->regs[APB2OPB_OPB1_WRITE_DATA];
+ } else {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Invalid operation: 0x%"HWADDR_PRIx" for %u\n",
+ __func__, addr, size);
+ return;
+ }
+
+ if (op_size & ~(APB2OPB_OPB_XFER_HALF | APB2OPB_OPB_XFER_FULL)) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "OPB transaction failed: Unrecognised access width:
%d\n",
Unrecognized
+ op_size);
+ return;
+ }
+
+ op_size += 1;
+
+ if (op_mode & APB2OPB_OPB_MODE_RD) {
+ int index = opb ? APB2OPB_OPB1_READ_DATA
+ : APB2OPB_OPB0_READ_DATA;
+
+ switch (op_size) {
+ case 1:
+ s->regs[index] = fsi_opb_read8(&s->opb[opb], op_addr);
+ break;
+ case 2:
+ s->regs[index] = fsi_opb_read16(&s->opb[opb], op_addr);
+ break;
+ case 4:
+ s->regs[index] = fsi_opb_read32(&s->opb[opb], op_addr);
+ break;
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Size not supported: %u\n",
+ __func__, size);
this should use op_size and not size and seems redudant with
the unrecognized test above.
+ return;
+ }
+ } else {
+ /* FIXME: Endian swizzling */
+ switch (op_size) {
+ case 1:
+ fsi_opb_write8(&s->opb[opb], op_addr, op_data);
+ break;
+ case 2:
+ fsi_opb_write16(&s->opb[opb], op_addr, op_data);
+ break;
+ case 4:
+ fsi_opb_write32(&s->opb[opb], op_addr, op_data);
+ break;
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "%s: Size not supported: %u\n",
+ __func__, op_size);
+ return;
+ }
+ }
The above is equivalent to :
MemTxResult result;
bool is_write = !(op_mode & APB2OPB_OPB_MODE_RD);
int index = opb ? APB2OPB_OPB1_READ_DATA : APB2OPB_OPB0_READ_DATA;
AddressSpace *as = &s->opb[opb].as;
result = address_space_rw(as, op_addr, MEMTXATTRS_UNSPECIFIED,
&op_data, op_size, is_write);
if (result != MEMTX_OK) {
qemu_log_mask(LOG_GUEST_ERROR, "%s: OPB %s failed @%08x\n",
__func__, is_write ? "write" : "read", op_addr);
return;
}
if (!is_write) {
s->regs[index] = op_data;
}
and the fsi_opb_* routines are useless to me.
+ s->regs[APB2OPB_IRQ_STS] |= opb ? APB2OPB_IRQ_STS_OPB1_TX_ACK
+ : APB2OPB_IRQ_STS_OPB0_TX_ACK;
+ break;
+ }
+ }
+
+ s->regs[TO_REG(addr)] = data;
+}
+
+static const struct MemoryRegionOps aspeed_apb2opb_ops = {
+ .read = fsi_aspeed_apb2opb_read,
+ .write = fsi_aspeed_apb2opb_write,
+ .valid.max_access_size = 4,
+ .valid.min_access_size = 4,
+ .impl.max_access_size = 4,
+ .impl.min_access_size = 4,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+static void fsi_aspeed_apb2opb_realize(DeviceState *dev, Error **errp)
+{
+ SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
+ AspeedAPB2OPBState *s = ASPEED_APB2OPB(dev);
+
+ qbus_init(&s->opb[0], sizeof(s->opb[0]), TYPE_OP_BUS,
+ DEVICE(s), NULL);
+ qbus_init(&s->opb[1], sizeof(s->opb[1]), TYPE_OP_BUS,
+ DEVICE(s), NULL);
+
+ sysbus_init_irq(sbd, &s->irq);
+
+ memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_apb2opb_ops, s,
+ TYPE_ASPEED_APB2OPB, 0x1000);
+ sysbus_init_mmio(sbd, &s->iomem);
+}
+
+static void fsi_aspeed_apb2opb_reset(DeviceState *dev)
+{
+ AspeedAPB2OPBState *s = ASPEED_APB2OPB(dev);
+
+ memcpy(s->regs, aspeed_apb2opb_reset, ASPEED_APB2OPB_NR_REGS);
+}
+
+static void fsi_aspeed_apb2opb_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->desc = "ASPEED APB2OPB Bridge";
+ dc->realize = fsi_aspeed_apb2opb_realize;
+ dc->reset = fsi_aspeed_apb2opb_reset;
+}
+
+static const TypeInfo aspeed_apb2opb_info = {
+ .name = TYPE_ASPEED_APB2OPB,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(AspeedAPB2OPBState),
+ .class_init = fsi_aspeed_apb2opb_class_init,
+};
+
+static void aspeed_apb2opb_register_types(void)
+{
+ type_register_static(&aspeed_apb2opb_info);
+}
+
+type_init(aspeed_apb2opb_register_types);
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 7e68348440..d963de74c9 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -555,6 +555,7 @@ config ASPEED_SOC
select LED
select PMBUS
select MAX31785
+ select FSI_APB2OPB_ASPEED
config MPS2
bool
diff --git a/hw/fsi/Kconfig b/hw/fsi/Kconfig
index 0f6e6d331a..6bbcb8f6ca 100644
--- a/hw/fsi/Kconfig
+++ b/hw/fsi/Kconfig
@@ -1,3 +1,7 @@
+config FSI_APB2OPB_ASPEED
+ bool
+ select FSI_OPB
+
config FSI_OPB
bool
select FSI_CFAM
diff --git a/hw/fsi/meson.build b/hw/fsi/meson.build
index 407b8c2775..1bc6bb63cc 100644
--- a/hw/fsi/meson.build
+++ b/hw/fsi/meson.build
@@ -3,3 +3,4 @@ system_ss.add(when: 'CONFIG_FSI_SCRATCHPAD', if_true:
files('engine-scratchpad.c
system_ss.add(when: 'CONFIG_FSI_CFAM', if_true: files('cfam.c'))
system_ss.add(when: 'CONFIG_FSI', if_true:
files('fsi.c','fsi-master.c','fsi-slave.c'))
system_ss.add(when: 'CONFIG_FSI_OPB', if_true: files('opb.c'))
+system_ss.add(when: 'CONFIG_FSI_APB2OPB_ASPEED', if_true:
files('aspeed-apb2opb.c'))
diff --git a/hw/fsi/trace-events b/hw/fsi/trace-events
index 13b211a815..9a45843eb6 100644
--- a/hw/fsi/trace-events
+++ b/hw/fsi/trace-events
@@ -17,3 +17,5 @@ fsi_opb_write16(uint64_t addr, uint32_t size) "@0x%" PRIx64 "
size=%d"
fsi_opb_write32(uint64_t addr, uint32_t size) "@0x%" PRIx64 " size=%d"
fsi_opb_unimplemented_read(uint64_t addr, uint32_t size) "@0x%" PRIx64 "
size=%d"
fsi_opb_unimplemented_write(uint64_t addr, uint32_t size, uint64_t data) "@0x%" PRIx64
" size=%d value=0x%"PRIx64
+fsi_aspeed_apb2opb_read(uint64_t addr, uint32_t size) "@0x%" PRIx64 " size=%d"
+fsi_aspeed_apb2opb_write(uint64_t addr, uint32_t size, uint64_t data) "@0x%" PRIx64
" size=%d value=0x%"PRIx64
- [PATCH v6 00/10] Introduce model for IBM's FSI, Ninad Palsule, 2023/10/21
- [PATCH v6 06/10] hw/fsi: Aspeed APB2OPB interface, Ninad Palsule, 2023/10/21
- Re: [PATCH v6 06/10] hw/fsi: Aspeed APB2OPB interface,
Cédric Le Goater <=
- Re: [PATCH v6 06/10] hw/fsi: Aspeed APB2OPB interface, Ninad Palsule, 2023/10/24
- Re: [PATCH v6 06/10] hw/fsi: Aspeed APB2OPB interface, Cédric Le Goater, 2023/10/24
- Re: [PATCH v6 06/10] hw/fsi: Aspeed APB2OPB interface, Ninad Palsule, 2023/10/24
- Re: [PATCH v6 06/10] hw/fsi: Aspeed APB2OPB interface, Ninad Palsule, 2023/10/26
- Re: [PATCH v6 06/10] hw/fsi: Aspeed APB2OPB interface, Andrew Jeffery, 2023/10/27
[PATCH v6 05/10] hw/fsi: IBM's On-chip Peripheral Bus, Ninad Palsule, 2023/10/21
[PATCH v6 04/10] hw/fsi: Introduce IBM's FSI, Ninad Palsule, 2023/10/21
[PATCH v6 01/10] hw/fsi: Introduce IBM's Local bus, Ninad Palsule, 2023/10/21