[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-block] [PULL 02/11] qcow2-refcount: avoid eating RAM
From: |
Max Reitz |
Subject: |
[Qemu-block] [PULL 02/11] qcow2-refcount: avoid eating RAM |
Date: |
Tue, 7 May 2019 17:18:10 +0200 |
From: Vladimir Sementsov-Ogievskiy <address@hidden>
qcow2_inc_refcounts_imrt() (through realloc_refcount_array()) can eat
an unpredictable amount of memory on corrupted table entries, which are
referencing regions far beyond the end of file.
Prevent this, by skipping such regions from further processing.
Interesting that iotest 138 checks exactly the behavior which we fix
here. So, change the test appropriately.
Signed-off-by: Vladimir Sementsov-Ogievskiy <address@hidden>
Reviewed-by: Max Reitz <address@hidden>
Message-id: address@hidden
Signed-off-by: Max Reitz <address@hidden>
---
block/qcow2-refcount.c | 19 +++++++++++++++++++
tests/qemu-iotests/138 | 12 +++++-------
tests/qemu-iotests/138.out | 5 ++++-
3 files changed, 28 insertions(+), 8 deletions(-)
diff --git a/block/qcow2-refcount.c b/block/qcow2-refcount.c
index ed3d8ebd57..21e50dacf4 100644
--- a/block/qcow2-refcount.c
+++ b/block/qcow2-refcount.c
@@ -1520,12 +1520,31 @@ int qcow2_inc_refcounts_imrt(BlockDriverState *bs,
BdrvCheckResult *res,
{
BDRVQcow2State *s = bs->opaque;
uint64_t start, last, cluster_offset, k, refcount;
+ int64_t file_len;
int ret;
if (size <= 0) {
return 0;
}
+ file_len = bdrv_getlength(bs->file->bs);
+ if (file_len < 0) {
+ return file_len;
+ }
+
+ /*
+ * Last cluster of qcow2 image may be semi-allocated, so it may be OK to
+ * reference some space after file end but it should be less than one
+ * cluster.
+ */
+ if (offset + size - file_len >= s->cluster_size) {
+ fprintf(stderr, "ERROR: counting reference for region exceeding the "
+ "end of the file by one cluster or more: offset 0x%" PRIx64
+ " size 0x%" PRIx64 "\n", offset, size);
+ res->corruptions++;
+ return 0;
+ }
+
start = start_of_cluster(s, offset);
last = start_of_cluster(s, offset + size - 1);
for(cluster_offset = start; cluster_offset <= last;
diff --git a/tests/qemu-iotests/138 b/tests/qemu-iotests/138
index f353ac8219..6a731370db 100755
--- a/tests/qemu-iotests/138
+++ b/tests/qemu-iotests/138
@@ -54,15 +54,13 @@ $QEMU_IO -c 'write 0 512' "$TEST_IMG" | _filter_qemu_io
# Put the data cluster at a multiple of 2 TB, resulting in the image apparently
# having a multiple of 2^32 clusters
# (To be more specific: It is at 32 PB)
-poke_file "$TEST_IMG" 2048 "\x80\x80\x00\x00\x00\x00\x00\x00"
+poke_file "$TEST_IMG" $((2048 + 8)) "\x00\x80\x00\x00\x00\x00\x00\x00"
# An offset of 32 PB results in qemu-img check having to allocate an in-memory
-# refcount table of 128 TB (16 bit refcounts, 512 byte clusters).
-# This should be generally too much for any system and thus fail.
-# What this test is checking is that the qcow2 driver actually tries to
allocate
-# such a large amount of memory (and is consequently aborting) instead of
having
-# truncated the cluster count somewhere (which would result in much less memory
-# being allocated and then a segfault occurring).
+# refcount table of 128 TB (16 bit refcounts, 512 byte clusters), if qemu-img
+# don't check that referenced data cluster is far beyond the end of file.
+# But starting from 4.0, qemu-img does this check, and instead of "Cannot
+# allocate memory", we have an error showing that l2 entry is invalid.
_check_test_img
# success, all done
diff --git a/tests/qemu-iotests/138.out b/tests/qemu-iotests/138.out
index 3fe911f85a..aca7d47a80 100644
--- a/tests/qemu-iotests/138.out
+++ b/tests/qemu-iotests/138.out
@@ -5,5 +5,8 @@ QA output created by 138
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=512
wrote 512/512 bytes at offset 0
512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-qemu-img: Check failed: Cannot allocate memory
+ERROR: counting reference for region exceeding the end of the file by one
cluster or more: offset 0x80000000000000 size 0x200
+
+1 errors were found on the image.
+Data may be corrupted, or further writes to the image may corrupt it.
*** done
--
2.20.1
- [Qemu-block] [PULL 00/11] Block patches, Max Reitz, 2019/05/07
- [Qemu-block] [PULL 01/11] qcow2-refcount: fix check_oflag_copied, Max Reitz, 2019/05/07
- [Qemu-block] [PULL 02/11] qcow2-refcount: avoid eating RAM,
Max Reitz <=
- [Qemu-block] [PULL 04/11] qcow2-refcount: check_refcounts_l2: don't count fixed cluster as allocated, Max Reitz, 2019/05/07
- [Qemu-block] [PULL 05/11] qcow2-refcount: don't mask corruptions under internal errors, Max Reitz, 2019/05/07
- [Qemu-block] [PULL 03/11] qcow2-refcount: check_refcounts_l2: reduce ignored overlaps, Max Reitz, 2019/05/07
- [Qemu-block] [PULL 06/11] qcow2: discard bitmap when removed, Max Reitz, 2019/05/07
- [Qemu-block] [PULL 07/11] block/ssh: Implement .bdrv_refresh_filename(), Max Reitz, 2019/05/07
- [Qemu-block] [PULL 08/11] block/ssh: Implement .bdrv_dirname(), Max Reitz, 2019/05/07
- [Qemu-block] [PULL 09/11] block: Assert that drv->bdrv_child_perm is set in bdrv_child_perm(), Max Reitz, 2019/05/07
- [Qemu-block] [PULL 10/11] commit: Use bdrv_append() in commit_start(), Max Reitz, 2019/05/07
- [Qemu-block] [PULL 11/11] iotests: Fix iotests 110 and 126, Max Reitz, 2019/05/07
- Re: [Qemu-block] [PULL 00/11] Block patches, Peter Maydell, 2019/05/09