[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PULL 02/51] iotests/229: Use blkdebug to inject an error
From: |
Kevin Wolf |
Subject: |
[PULL 02/51] iotests/229: Use blkdebug to inject an error |
Date: |
Fri, 15 May 2020 14:44:32 +0200 |
229 relies on the mirror running into an I/O error when the target is
smaller than the source. After changing mirror to catch this condition
while starting the job, this test case won't get a job that is paused
for an I/O error any more. Use blkdebug instead to inject an error.
Signed-off-by: Kevin Wolf <address@hidden>
Reviewed-by: Eric Blake <address@hidden>
Message-Id: <address@hidden>
Reviewed-by: Max Reitz <address@hidden>
Reviewed-by: Vladimir Sementsov-Ogievskiy <address@hidden>
Signed-off-by: Kevin Wolf <address@hidden>
---
tests/qemu-iotests/229 | 15 +++++++++++----
tests/qemu-iotests/229.out | 6 +++---
2 files changed, 14 insertions(+), 7 deletions(-)
diff --git a/tests/qemu-iotests/229 b/tests/qemu-iotests/229
index 866168b236..a5d4e5d4f2 100755
--- a/tests/qemu-iotests/229
+++ b/tests/qemu-iotests/229
@@ -33,6 +33,7 @@ _cleanup()
_cleanup_test_img
_rm_test_img "$TEST_IMG"
_rm_test_img "$DEST_IMG"
+ rm -f "$TEST_DIR/blkdebug.conf"
}
trap "_cleanup; exit \$status" 0 1 2 3 15
@@ -49,11 +50,10 @@ _supported_os Linux
DEST_IMG="$TEST_DIR/d.$IMGFMT"
TEST_IMG="$TEST_DIR/b.$IMGFMT"
+BLKDEBUG_CONF="$TEST_DIR/blkdebug.conf"
_make_test_img 2M
-
-# destination for mirror will be too small, causing error
-TEST_IMG=$DEST_IMG _make_test_img 1M
+TEST_IMG=$DEST_IMG _make_test_img 2M
$QEMU_IO -c 'write 0 2M' "$TEST_IMG" | _filter_qemu_io
@@ -67,11 +67,18 @@ echo
echo '=== Starting drive-mirror, causing error & stop ==='
echo
+cat > "$BLKDEBUG_CONF" <<EOF
+[inject-error]
+event = "write_aio"
+errno = "5"
+once = "on"
+EOF
+
_send_qemu_cmd $QEMU_HANDLE \
"{'execute': 'drive-mirror',
'arguments': {'device': 'testdisk',
'format': '$IMGFMT',
- 'target': '$DEST_IMG',
+ 'target': 'blkdebug:$BLKDEBUG_CONF:$DEST_IMG',
'sync': 'full',
'mode': 'existing',
'on-source-error': 'stop',
diff --git a/tests/qemu-iotests/229.out b/tests/qemu-iotests/229.out
index 22350d75d7..fdcd249642 100644
--- a/tests/qemu-iotests/229.out
+++ b/tests/qemu-iotests/229.out
@@ -1,6 +1,6 @@
QA output created by 229
Formatting 'TEST_DIR/b.IMGFMT', fmt=IMGFMT size=2097152
-Formatting 'TEST_DIR/d.IMGFMT', fmt=IMGFMT size=1048576
+Formatting 'TEST_DIR/d.IMGFMT', fmt=IMGFMT size=2097152
wrote 2097152/2097152 bytes at offset 0
2 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
{'execute': 'qmp_capabilities'}
@@ -8,7 +8,7 @@ wrote 2097152/2097152 bytes at offset 0
=== Starting drive-mirror, causing error & stop ===
-{'execute': 'drive-mirror', 'arguments': {'device': 'testdisk', 'format':
'IMGFMT', 'target': 'TEST_DIR/d.IMGFMT', 'sync': 'full', 'mode': 'existing',
'on-source-error': 'stop', 'on-target-error': 'stop' }}
+{'execute': 'drive-mirror', 'arguments': {'device': 'testdisk', 'format':
'IMGFMT', 'target': 'blkdebug:TEST_DIR/blkdebug.conf:TEST_DIR/d.IMGFMT',
'sync': 'full', 'mode': 'existing', 'on-source-error': 'stop',
'on-target-error': 'stop' }}
{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event":
"JOB_STATUS_CHANGE", "data": {"status": "created", "id": "testdisk"}}
{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event":
"JOB_STATUS_CHANGE", "data": {"status": "running", "id": "testdisk"}}
{"return": {}}
@@ -21,5 +21,5 @@ wrote 2097152/2097152 bytes at offset 0
{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event":
"JOB_STATUS_CHANGE", "data": {"status": "running", "id": "testdisk"}}
{"return": {}}
{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event":
"JOB_STATUS_CHANGE", "data": {"status": "aborting", "id": "testdisk"}}
-{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event":
"BLOCK_JOB_CANCELLED", "data": {"device": "testdisk", "len": 2097152, "offset":
1048576, "speed": 0, "type": "mirror"}}
+{"timestamp": {"seconds": TIMESTAMP, "microseconds": TIMESTAMP}, "event":
"BLOCK_JOB_CANCELLED", "data": {"device": "testdisk", "len": 2097152, "offset":
2097152, "speed": 0, "type": "mirror"}}
*** done
--
2.25.4
- [PULL 00/51] Block layer patches, Kevin Wolf, 2020/05/15
- [PULL 01/51] iotests/109: Don't mirror with mismatched size, Kevin Wolf, 2020/05/15
- [PULL 02/51] iotests/229: Use blkdebug to inject an error,
Kevin Wolf <=
- [PULL 03/51] mirror: Make sure that source and target size match, Kevin Wolf, 2020/05/15
- [PULL 05/51] block/replication.c: Avoid cancelling the job twice, Kevin Wolf, 2020/05/15
- [PULL 04/51] iotests: Mirror with different source/target size, Kevin Wolf, 2020/05/15
- [PULL 06/51] iotests: Fix incomplete type declarations, Kevin Wolf, 2020/05/15
- [PULL 08/51] block: Add bdrv_make_empty(), Kevin Wolf, 2020/05/15
- [PULL 09/51] block: Add blk_make_empty(), Kevin Wolf, 2020/05/15
- [PULL 10/51] block: Use blk_make_empty() after commits, Kevin Wolf, 2020/05/15
- [PULL 12/51] block: Use bdrv_make_empty() where possible, Kevin Wolf, 2020/05/15
- [PULL 07/51] iotests: Run pylint and mypy in a testcase, Kevin Wolf, 2020/05/15
- [PULL 11/51] replication: Avoid blk_make_empty() on read-only child, Kevin Wolf, 2020/05/15