[PATCH v5 6/8] hw/arm: npcm8xx_boards: EEPROMs can take bus as parameter

[Hao Wu]

We allow at24c_eeprom_init to take a I2CBus* as parameter. This allows
us to attach an EEPROM device behind an I2C mux which is not
possible with the old method.

Signed-off-by: Hao Wu <wuhaotsh@google.com>
---
 hw/arm/npcm7xx_boards.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/hw/arm/npcm7xx_boards.c b/hw/arm/npcm7xx_boards.c
index 6bc6f5d2fe..b083b0c572 100644
--- a/hw/arm/npcm7xx_boards.c
+++ b/hw/arm/npcm7xx_boards.c
@@ -140,10 +140,9 @@ static I2CBus *npcm7xx_i2c_get_bus(NPCM7xxState *soc, 
uint32_t num)
     return I2C_BUS(qdev_get_child_bus(DEVICE(&soc->smbus[num]), "i2c-bus"));
 }
 
-static void at24c_eeprom_init(NPCM7xxState *soc, int bus, uint8_t addr,
+static void at24c_eeprom_init(I2CBus *i2c_bus, int bus, uint8_t addr,
                               uint32_t rsize)
 {
-    I2CBus *i2c_bus = npcm7xx_i2c_get_bus(soc, bus);
     I2CSlave *i2c_dev = i2c_slave_new("at24c-eeprom", addr);
     DeviceState *dev = DEVICE(i2c_dev);
 
@@ -253,8 +252,8 @@ static void quanta_gsj_i2c_init(NPCM7xxState *soc)
     i2c_slave_create_simple(npcm7xx_i2c_get_bus(soc, 3), "tmp105", 0x5c);
     i2c_slave_create_simple(npcm7xx_i2c_get_bus(soc, 4), "tmp105", 0x5c);
 
-    at24c_eeprom_init(soc, 9, 0x55, 8192);
-    at24c_eeprom_init(soc, 10, 0x55, 8192);
+    at24c_eeprom_init(npcm7xx_i2c_get_bus(soc, 9), 9, 0x55, 8192);
+    at24c_eeprom_init(npcm7xx_i2c_get_bus(soc, 10), 10, 0x55, 8192);
 
     /*
      * i2c-11:
@@ -360,7 +359,8 @@ static void kudo_bmc_i2c_init(NPCM7xxState *soc)
 
     i2c_slave_create_simple(npcm7xx_i2c_get_bus(soc, 4), TYPE_PCA9548, 0x77);
 
-    at24c_eeprom_init(soc, 4, 0x50, 8192); /* mbfru */
+    /* mbfru */
+    at24c_eeprom_init(npcm7xx_i2c_get_bus(soc, 4), 4, 0x50, 8192);
 
     i2c_mux = i2c_slave_create_simple(npcm7xx_i2c_get_bus(soc, 13),
                                       TYPE_PCA9548, 0x77);
@@ -371,7 +371,8 @@ static void kudo_bmc_i2c_init(NPCM7xxState *soc)
     i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 4), "tmp105", 0x48);
     i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 5), "tmp105", 0x49);
 
-    at24c_eeprom_init(soc, 14, 0x55, 8192); /* bmcfru */
+    /* bmcfru */
+    at24c_eeprom_init(npcm7xx_i2c_get_bus(soc, 14), 14, 0x55, 8192);
 
     /* TODO: Add remaining i2c devices. */
 }
-- 
2.37.0.170.g444d1eabd0-goog