[RFC v5 09/11] qemu-io: add zoned block device operations.

[Sam Li]

Add zoned storage commands of the device: zone_report(zrp), zone_open(zo),
zone_close(zc), zone_reset(zrs), zone_finish(zf).

For example, to test zone_report, use following command:
$ ./build/qemu-io --image-opts driver=zoned_host_device, filename=/dev/nullb0
-c "zrp offset nr_zones"

Signed-off-by: Sam Li <faithilikerun@gmail.com>
---
 block/io.c     |  24 ++-------
 qemu-io-cmds.c | 144 +++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 148 insertions(+), 20 deletions(-)

diff --git a/block/io.c b/block/io.c
index a4625fb0e1..de9ec1d740 100644
--- a/block/io.c
+++ b/block/io.c
@@ -3209,19 +3209,11 @@ int bdrv_co_zone_report(BlockDriverState *bs, int64_t 
offset,
     IO_CODE();
 
     bdrv_inc_in_flight(bs);
-    if (!drv || (!drv->bdrv_co_zone_report)) {
+    if (!drv || !drv->bdrv_co_zone_report) {
         co.ret = -ENOTSUP;
         goto out;
     }
-
-    if (drv->bdrv_co_zone_report) {
-        co.ret = drv->bdrv_co_zone_report(bs, offset, nr_zones, zones);
-    } else {
-        co.ret = -ENOTSUP;
-        goto out;
-        qemu_coroutine_yield();
-    }
-
+    co.ret = drv->bdrv_co_zone_report(bs, offset, nr_zones, zones);
 out:
     bdrv_dec_in_flight(bs);
     return co.ret;
@@ -3237,19 +3229,11 @@ int bdrv_co_zone_mgmt(BlockDriverState *bs, BlockZoneOp 
op,
     IO_CODE();
 
     bdrv_inc_in_flight(bs);
-    if (!drv || (!drv->bdrv_co_zone_mgmt)) {
+    if (!drv || !drv->bdrv_co_zone_mgmt) {
         co.ret = -ENOTSUP;
         goto out;
     }
-
-    if (drv->bdrv_co_zone_mgmt) {
-        co.ret = drv->bdrv_co_zone_mgmt(bs, op, offset, len);
-    } else {
-        co.ret = -ENOTSUP;
-        goto out;
-        qemu_coroutine_yield();
-    }
-
+    co.ret = drv->bdrv_co_zone_mgmt(bs, op, offset, len);
 out:
     bdrv_dec_in_flight(bs);
     return co.ret;
diff --git a/qemu-io-cmds.c b/qemu-io-cmds.c
index 952dc940f1..5a215277c7 100644
--- a/qemu-io-cmds.c
+++ b/qemu-io-cmds.c
@@ -1712,6 +1712,145 @@ static const cmdinfo_t flush_cmd = {
     .oneline    = "flush all in-core file state to disk",
 };
 
+static int zone_report_f(BlockBackend *blk, int argc, char **argv)
+{
+    int ret;
+    int64_t offset;
+    unsigned int nr_zones;
+
+    ++optind;
+    offset = cvtnum(argv[optind]);
+    ++optind;
+    nr_zones = cvtnum(argv[optind]);
+
+    g_autofree BlockZoneDescriptor *zones = NULL;
+    zones = g_new(BlockZoneDescriptor, nr_zones);
+    ret = blk_zone_report(blk, offset, &nr_zones, zones);
+    if (ret < 0) {
+        printf("zone report failed: %s\n", strerror(-ret));
+    } else {
+        for (int i = 0; i < nr_zones; ++i) {
+            printf("start: 0x%" PRIx64 ", len 0x%" PRIx64 ", "
+                   "cap"" 0x%" PRIx64 ",wptr 0x%" PRIx64 ", "
+                   "zcond:%u, [type: %u]\n",
+                   zones[i].start, zones[i].length, zones[i].cap, zones[i].wp,
+                   zones[i].cond, zones[i].type);
+        }
+    }
+    return ret;
+}
+
+static const cmdinfo_t zone_report_cmd = {
+        .name = "zone_report",
+        .altname = "zrp",
+        .cfunc = zone_report_f,
+        .argmin = 2,
+        .argmax = 2,
+        .args = "offset number",
+        .oneline = "report zone information",
+};
+
+static int zone_open_f(BlockBackend *blk, int argc, char **argv)
+{
+    int ret;
+    int64_t offset, len;
+    ++optind;
+    offset = cvtnum(argv[optind]);
+    ++optind;
+    len = cvtnum(argv[optind]);
+    ret = blk_zone_mgmt(blk, BLK_ZO_OPEN, offset, len);
+    if (ret < 0) {
+        printf("zone open failed: %s\n", strerror(-ret));
+    }
+    return ret;
+}
+
+static const cmdinfo_t zone_open_cmd = {
+        .name = "zone_open",
+        .altname = "zo",
+        .cfunc = zone_open_f,
+        .argmin = 2,
+        .argmax = 2,
+        .args = "offset len",
+        .oneline = "explicit open a range of zones in zone block device",
+};
+
+static int zone_close_f(BlockBackend *blk, int argc, char **argv)
+{
+    int ret;
+    int64_t offset, len;
+    ++optind;
+    offset = cvtnum(argv[optind]);
+    ++optind;
+    len = cvtnum(argv[optind]);
+    ret = blk_zone_mgmt(blk, BLK_ZO_CLOSE, offset, len);
+    if (ret < 0) {
+        printf("zone close failed: %s\n", strerror(-ret));
+    }
+    return ret;
+}
+
+static const cmdinfo_t zone_close_cmd = {
+        .name = "zone_close",
+        .altname = "zc",
+        .cfunc = zone_close_f,
+        .argmin = 2,
+        .argmax = 2,
+        .args = "offset len",
+        .oneline = "close a range of zones in zone block device",
+};
+
+static int zone_finish_f(BlockBackend *blk, int argc, char **argv)
+{
+    int ret;
+    int64_t offset, len;
+    ++optind;
+    offset = cvtnum(argv[optind]);
+    ++optind;
+    len = cvtnum(argv[optind]);
+    ret = blk_zone_mgmt(blk, BLK_ZO_FINISH, offset, len);
+    if (ret < 0) {
+        printf("zone finish failed: %s\n", strerror(-ret));
+    }
+    return ret;
+}
+
+static const cmdinfo_t zone_finish_cmd = {
+        .name = "zone_finish",
+        .altname = "zf",
+        .cfunc = zone_finish_f,
+        .argmin = 2,
+        .argmax = 2,
+        .args = "offset len",
+        .oneline = "finish a range of zones in zone block device",
+};
+
+static int zone_reset_f(BlockBackend *blk, int argc, char **argv)
+{
+    int ret;
+    int64_t offset, len;
+    ++optind;
+    offset = cvtnum(argv[optind]);
+    ++optind;
+    len = cvtnum(argv[optind]);
+    ret = blk_zone_mgmt(blk, BLK_ZO_RESET, offset, len);
+    if (ret < 0) {
+        printf("zone reset failed: %s\n", strerror(-ret));
+    }
+    return ret;
+}
+
+static const cmdinfo_t zone_reset_cmd = {
+        .name = "zone_reset",
+        .altname = "zrs",
+        .cfunc = zone_reset_f,
+        .argmin = 2,
+        .argmax = 2,
+        .args = "offset len",
+        .oneline = "reset a zone write pointer in zone block device",
+};
+
+
 static int truncate_f(BlockBackend *blk, int argc, char **argv);
 static const cmdinfo_t truncate_cmd = {
     .name       = "truncate",
@@ -2504,6 +2643,11 @@ static void __attribute((constructor)) 
init_qemuio_commands(void)
     qemuio_add_command(&aio_write_cmd);
     qemuio_add_command(&aio_flush_cmd);
     qemuio_add_command(&flush_cmd);
+    qemuio_add_command(&zone_report_cmd);
+    qemuio_add_command(&zone_open_cmd);
+    qemuio_add_command(&zone_close_cmd);
+    qemuio_add_command(&zone_finish_cmd);
+    qemuio_add_command(&zone_reset_cmd);
     qemuio_add_command(&truncate_cmd);
     qemuio_add_command(&length_cmd);
     qemuio_add_command(&info_cmd);
-- 
2.37.1