[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH 4/5] gdbstub: support for gdb "detach/kill/quit"
From: |
Edgar E. Iglesias |
Subject: |
Re: [Qemu-devel] [PATCH 4/5] gdbstub: support for gdb "detach/kill/quit" |
Date: |
Thu, 15 May 2008 23:13:15 +0200 |
User-agent: |
Mutt/1.5.16 (2007-06-09) |
On Thu, May 15, 2008 at 09:11:32AM -0500, Jason Wessel wrote:
> Implement the 'k' gdbserial packet which kills the qemu instance via
> the debugger stub.
>
> Implement the 'D' detach packet for the gdb stub such that you can
> disconnect gdb with the "detach" command. This required implementing
> a cpu_breakpoint_remove_all() and a cpu_watchpoint_remove_all()
> function to cleanup all the breakpoints and watchpoints prior to
> leaving the gdb stub else simulation can stop with no debugger
> attached.
>
> On a '?' packet remove all the breakpoints and watchpoints. This is
> considered more of a safety net in case you force killed gdb or it
> crashed and you are reconnecting. The identical behavior exists for
> kgdb in the linux kernel.
>
> Signed-off-by: Jason Wessel <address@hidden>
Thanks Jason, this one looks good to me.
> ---
> cpu-all.h | 2 ++
> exec.c | 21 +++++++++++++++++++++
> gdbstub.c | 17 +++++++++++++++++
> 3 files changed, 40 insertions(+), 0 deletions(-)
>
> diff --git a/cpu-all.h b/cpu-all.h
> index 7e77f76..d71166c 100644
> --- a/cpu-all.h
> +++ b/cpu-all.h
> @@ -760,8 +760,10 @@ void cpu_reset_interrupt(CPUState *env, int mask);
>
> int cpu_watchpoint_insert(CPUState *env, target_ulong addr);
> int cpu_watchpoint_remove(CPUState *env, target_ulong addr);
> +void cpu_watchpoint_remove_all(CPUState *env);
> int cpu_breakpoint_insert(CPUState *env, target_ulong pc);
> int cpu_breakpoint_remove(CPUState *env, target_ulong pc);
> +void cpu_breakpoint_remove_all(CPUState *env);
>
> #define SSTEP_ENABLE 0x1 /* Enable simulated HW single stepping */
> #define SSTEP_NOIRQ 0x2 /* Do not use IRQ while single stepping */
> diff --git a/exec.c b/exec.c
> index 2fd0078..8f5c868 100644
> --- a/exec.c
> +++ b/exec.c
> @@ -1139,6 +1139,16 @@ int cpu_watchpoint_remove(CPUState *env, target_ulong
> addr)
> return -1;
> }
>
> +/* Remove all watchpoints. */
> +void cpu_watchpoint_remove_all(CPUState *env) {
> + int i;
> +
> + for (i = 0; i < env->nb_watchpoints; i++) {
> + tlb_flush_page(env, env->watchpoint[i].vaddr);
> + }
> + env->nb_watchpoints = 0;
> +}
> +
> /* add a breakpoint. EXCP_DEBUG is returned by the CPU loop if a
> breakpoint is reached */
> int cpu_breakpoint_insert(CPUState *env, target_ulong pc)
> @@ -1162,6 +1172,17 @@ int cpu_breakpoint_insert(CPUState *env, target_ulong
> pc)
> #endif
> }
>
> +/* remove all breakpoints */
> +void cpu_breakpoint_remove_all(CPUState *env) {
> +#if defined(TARGET_HAS_ICE)
> + int i;
> + for(i = 0; i < env->nb_breakpoints; i++) {
> + breakpoint_invalidate(env, env->breakpoints[i]);
> + }
> + env->nb_breakpoints = 0;
> +#endif
> +}
> +
> /* remove a breakpoint */
> int cpu_breakpoint_remove(CPUState *env, target_ulong pc)
> {
> diff --git a/gdbstub.c b/gdbstub.c
> index 833cdd9..fb2d948 100644
> --- a/gdbstub.c
> +++ b/gdbstub.c
> @@ -1035,6 +1035,12 @@ static int gdb_handle_packet(GDBState *s, CPUState
> *env, const char *line_buf)
> /* TODO: Make this return the correct value for user-mode. */
> snprintf(buf, sizeof(buf), "S%02x", SIGTRAP);
> put_packet(s, buf);
> + /* Remove all the breakpoints when this query is issued,
> + * because gdb is doing and initial connect and the state
> + * should be cleaned up.
> + */
> + cpu_breakpoint_remove_all(env);
> + cpu_watchpoint_remove_all(env);
> break;
> case 'c':
> if (*p != '\0') {
> @@ -1058,6 +1064,17 @@ static int gdb_handle_packet(GDBState *s, CPUState
> *env, const char *line_buf)
> }
> gdb_continue(s);
> return RS_IDLE;
> + case 'k':
> + /* Kill the target */
> + fprintf(stderr, "\nQEMU: Terminated via GDBstub\n");
> + exit(0);
> + case 'D':
> + /* Detach packet */
> + cpu_breakpoint_remove_all(env);
> + cpu_watchpoint_remove_all(env);
> + gdb_continue(s);
> + put_packet(s, "OK");
> + break;
> case 's':
> if (*p != '\0') {
> addr = strtoull(p, (char **)&p, 16);
> --
> 1.5.5.1
>
>
--
Edgar E. Iglesias
Axis Communications AB
- [Qemu-devel] [PATCH 0/5] gdbstub and single step improvments, Jason Wessel, 2008/05/15
- [Qemu-devel] [PATCH 1/5] gdbstub: replace singlestep q packets with qRcmd packets, Jason Wessel, 2008/05/15
- Re: [Qemu-devel] [PATCH 2/5] gdbstub: gdb pass-through qemu monitor support, Edgar E. Iglesias, 2008/05/15
- Re: [Qemu-devel] [PATCH 2/5] gdbstub: gdb pass-through qemu monitor support, Jason Wessel, 2008/05/19
- Re: [Qemu-devel] [PATCH 2/5] gdbstub: gdb pass-through qemu monitor support, Paul Brook, 2008/05/19
- Re: [Qemu-devel] [PATCH 2/5] gdbstub: gdb pass-through qemu monitor support, Maxim Gorbachyov, 2008/05/21
- Re: [Qemu-devel] [PATCH 2/5] gdbstub: gdb pass-through qemu monitor support, Jason Wessel, 2008/05/21
- [Qemu-devel] Re: [PATCH 2/5] gdbstub: gdb pass-through qemu monitor support, Jan Kiszka, 2008/05/22
- Re: [Qemu-devel] Re: [PATCH 2/5] gdbstub: gdb pass-through qemu monitor support, Jason Wessel, 2008/05/22
- [Qemu-devel] Re: [PATCH 2/5] gdbstub: gdb pass-through qemu monitor support, Jan Kiszka, 2008/05/22
- Re: [Qemu-devel] Re: [PATCH 2/5] gdbstub: gdb pass-through qemu monitor support, Jason Wessel, 2008/05/22
- [Qemu-devel] Re: [PATCH 2/5] gdbstub: gdb pass-through qemu monitor support, Jan Kiszka, 2008/05/23