[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH 5/6] hook cpu_register_physical_mem
From: |
Glauber Costa |
Subject: |
[Qemu-devel] [PATCH 5/6] hook cpu_register_physical_mem |
Date: |
Tue, 20 Jan 2009 13:51:04 -0500 |
Since now we have our own memory read/write function, we don't
depend on all of tcg data structures anymore. So, instead of filling
them up, bypass it altogether by using kvm_set_phys mem alone.
To do that, we now have to provide our own way to get page
information given the address. (kvm_get_physical_page_desc)
Signed-off-by: Glauber Costa <address@hidden>
---
exec.c | 44 +++++++++++++++++++++++++++++---------------
kvm-all.c | 13 +++++++++++++
kvm.h | 2 ++
3 files changed, 44 insertions(+), 15 deletions(-)
diff --git a/exec.c b/exec.c
index 20ac972..f009e41 100644
--- a/exec.c
+++ b/exec.c
@@ -2260,14 +2260,8 @@ static void *subpage_init (target_phys_addr_t base,
ram_addr_t *phys,
} \
} while (0)
-/* register physical memory. 'size' must be a multiple of the target
- page size. If (phys_offset & ~TARGET_PAGE_MASK) != 0, then it is an
- io memory page. The address used when calling the IO function is
- the offset from the start of the region, plus region_offset. Both
- start_region and regon_offset are rounded down to a page boundary
- before calculating this offset. This should not be a problem unless
- the low bits of start_addr and region_offset differ. */
-void cpu_register_physical_memory_offset(target_phys_addr_t start_addr,
+
+static void default_register_physical_memory_offset(target_phys_addr_t
start_addr,
ram_addr_t size,
ram_addr_t phys_offset,
ram_addr_t region_offset)
@@ -2285,8 +2279,6 @@ void
cpu_register_physical_memory_offset(target_phys_addr_t start_addr,
kqemu_set_phys_mem(start_addr, size, phys_offset);
}
#endif
- if (kvm_enabled())
- kvm_set_phys_mem(start_addr, size, phys_offset);
region_offset &= TARGET_PAGE_MASK;
size = (size + TARGET_PAGE_SIZE - 1) & TARGET_PAGE_MASK;
@@ -2353,15 +2345,37 @@ void
cpu_register_physical_memory_offset(target_phys_addr_t start_addr,
}
}
+/* register physical memory. 'size' must be a multiple of the target
+ page size. If (phys_offset & ~TARGET_PAGE_MASK) != 0, then it is an
+ io memory page. The address used when calling the IO function is
+ the offset from the start of the region, plus region_offset. Both
+ start_region and regon_offset are rounded down to a page boundary
+ before calculating this offset. This should not be a problem unless
+ the low bits of start_addr and region_offset differ. */
+void cpu_register_physical_memory_offset(target_phys_addr_t start_addr,
+ ram_addr_t size,
+ ram_addr_t phys_offset,
+ ram_addr_t region_offset)
+{
+ if (kvm_enabled())
+ kvm_set_phys_mem(start_addr, size, phys_offset);
+ else
+ default_register_physical_memory_offset(start_addr, size, phys_offset,
region_offset);
+}
+
/* XXX: temporary until new memory mapping API */
ram_addr_t cpu_get_physical_page_desc(target_phys_addr_t addr)
{
- PhysPageDesc *p;
+ if (kvm_enabled()) {
+ return kvm_get_physical_page_desc(addr);
+ } else {
+ PhysPageDesc *p;
- p = phys_page_find(addr >> TARGET_PAGE_BITS);
- if (!p)
- return IO_MEM_UNASSIGNED;
- return p->phys_offset;
+ p = phys_page_find(addr >> TARGET_PAGE_BITS);
+ if (!p)
+ return IO_MEM_UNASSIGNED;
+ return p->phys_offset;
+ }
}
void qemu_register_coalesced_mmio(target_phys_addr_t addr, ram_addr_t size)
diff --git a/kvm-all.c b/kvm-all.c
index 9cbb2f9..85f2922 100644
--- a/kvm-all.c
+++ b/kvm-all.c
@@ -709,3 +709,16 @@ void kvm_cpu_physical_memory_rw(target_phys_addr_t addr,
uint8_t *buf,
kvm_cpu_physical_memory_rw(addr + l, buf + l, len - l, is_write);
}
}
+
+ram_addr_t kvm_get_physical_page_desc(target_phys_addr_t addr)
+{
+
+ KVMSlot *mem;
+ KVMState *s = kvm_state;
+ mem = kvm_lookup_slot(s, addr);
+
+ if (!mem)
+ return IO_MEM_UNASSIGNED;
+ else
+ return (addr - mem->start_addr) + mem->phys_offset;
+}
diff --git a/kvm.h b/kvm.h
index e3e9ca0..776cfcf 100644
--- a/kvm.h
+++ b/kvm.h
@@ -51,6 +51,8 @@ int kvm_uncoalesce_mmio_region(target_phys_addr_t start,
ram_addr_t size);
void kvm_cpu_physical_memory_rw(target_phys_addr_t addr, uint8_t *buf,
int len, int is_write);
+
+ram_addr_t kvm_get_physical_page_desc(target_phys_addr_t addr);
/* internal API */
struct KVMState;
--
1.5.6.5
Re: [Qemu-devel] [PATCH 0/6] Bypass tcg memory functions -v1.0-2009, Paul Brook, 2009/01/21
- Re: [Qemu-devel] [PATCH 0/6] Bypass tcg memory functions -v1.0-2009, Glauber Costa, 2009/01/21
- Re: [Qemu-devel] [PATCH 0/6] Bypass tcg memory functions -v1.0-2009, Ian Jackson, 2009/01/21
- Re: [Qemu-devel] [PATCH 0/6] Bypass tcg memory functions -v1.0-2009, Glauber Costa, 2009/01/21
- Re: [Qemu-devel] [PATCH 0/6] Bypass tcg memory functions -v1.0-2009, Paul Brook, 2009/01/21
- Re: [Qemu-devel] [PATCH 0/6] Bypass tcg memory functions -v1.0-2009, Glauber Costa, 2009/01/22
- Re: [Qemu-devel] [PATCH 0/6] Bypass tcg memory functions -v1.0-2009, Anthony Liguori, 2009/01/26