[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [RFC PATCH 2/6] ram_blocks: Convert to a QLIST
From: |
Cam Macdonell |
Subject: |
Re: [Qemu-devel] [RFC PATCH 2/6] ram_blocks: Convert to a QLIST |
Date: |
Wed, 9 Jun 2010 14:11:39 -0600 |
On Tue, Jun 8, 2010 at 1:15 PM, Alex Williamson
<address@hidden> wrote:
> This makes the RAM block list easier to manipulate. Also incorporate
> relevant variables into the RAMList struct.
>
> Signed-off-by: Alex Williamson <address@hidden>
> ---
>
> arch_init.c | 14 ++++++-----
> cpu-all.h | 28 ++++++++++++++++-------
> exec.c | 72
> ++++++++++++++++++-----------------------------------------
> 3 files changed, 49 insertions(+), 65 deletions(-)
>
> diff --git a/arch_init.c b/arch_init.c
> index 8e849a8..43e42ba 100644
> --- a/arch_init.c
> +++ b/arch_init.c
> @@ -110,7 +110,7 @@ static int ram_save_block(QEMUFile *f)
> ram_addr_t addr = 0;
> int bytes_sent = 0;
>
> - while (addr < last_ram_offset) {
> + while (addr < ram.last_offset) {
> if (cpu_physical_memory_get_dirty(current_addr,
> MIGRATION_DIRTY_FLAG)) {
> uint8_t *p;
>
> @@ -133,7 +133,7 @@ static int ram_save_block(QEMUFile *f)
> break;
> }
> addr += TARGET_PAGE_SIZE;
> - current_addr = (saved_addr + addr) % last_ram_offset;
> + current_addr = (saved_addr + addr) % ram.last_offset;
> }
>
> return bytes_sent;
> @@ -146,7 +146,7 @@ static ram_addr_t ram_save_remaining(void)
> ram_addr_t addr;
> ram_addr_t count = 0;
>
> - for (addr = 0; addr < last_ram_offset; addr += TARGET_PAGE_SIZE) {
> + for (addr = 0; addr < ram.last_offset; addr += TARGET_PAGE_SIZE) {
> if (cpu_physical_memory_get_dirty(addr, MIGRATION_DIRTY_FLAG)) {
> count++;
> }
> @@ -167,7 +167,7 @@ uint64_t ram_bytes_transferred(void)
>
> uint64_t ram_bytes_total(void)
> {
> - return last_ram_offset;
> + return ram.last_offset;
> }
>
> int ram_save_live(Monitor *mon, QEMUFile *f, int stage, void *opaque)
> @@ -191,7 +191,7 @@ int ram_save_live(Monitor *mon, QEMUFile *f, int stage,
> void *opaque)
> bytes_transferred = 0;
>
> /* Make sure all dirty bits are set */
> - for (addr = 0; addr < last_ram_offset; addr += TARGET_PAGE_SIZE) {
> + for (addr = 0; addr < ram.last_offset; addr += TARGET_PAGE_SIZE) {
> if (!cpu_physical_memory_get_dirty(addr, MIGRATION_DIRTY_FLAG)) {
> cpu_physical_memory_set_dirty(addr);
> }
> @@ -200,7 +200,7 @@ int ram_save_live(Monitor *mon, QEMUFile *f, int stage,
> void *opaque)
> /* Enable dirty memory tracking */
> cpu_physical_memory_set_dirty_tracking(1);
>
> - qemu_put_be64(f, last_ram_offset | RAM_SAVE_FLAG_MEM_SIZE);
> + qemu_put_be64(f, ram.last_offset | RAM_SAVE_FLAG_MEM_SIZE);
> }
>
> bytes_transferred_last = bytes_transferred;
> @@ -259,7 +259,7 @@ int ram_load(QEMUFile *f, void *opaque, int version_id)
> addr &= TARGET_PAGE_MASK;
>
> if (flags & RAM_SAVE_FLAG_MEM_SIZE) {
> - if (addr != last_ram_offset) {
> + if (addr != ram.last_offset) {
> return -EINVAL;
> }
> }
> diff --git a/cpu-all.h b/cpu-all.h
> index 77eaf85..458cb4b 100644
> --- a/cpu-all.h
> +++ b/cpu-all.h
> @@ -859,9 +859,21 @@ target_phys_addr_t cpu_get_phys_page_debug(CPUState
> *env, target_ulong addr);
> /* memory API */
>
> extern int phys_ram_fd;
> -extern uint8_t *phys_ram_dirty;
> extern ram_addr_t ram_size;
> -extern ram_addr_t last_ram_offset;
> +
> +typedef struct RAMBlock {
> + uint8_t *host;
> + ram_addr_t offset;
> + ram_addr_t length;
> + QLIST_ENTRY(RAMBlock) next;
> +} RAMBlock;
For my shared memory device I need a way to mark device memory as not
to be migrated. Can a flag to be added to this struct to accomplish
this?
> +
> +typedef struct RAMList {
> + uint8_t *phys_dirty;
> + ram_addr_t last_offset;
> + QLIST_HEAD(ram, RAMBlock) blocks;
> +} RAMList;
> +extern RAMList ram;
>
> extern const char *mem_path;
> extern int mem_prealloc;
> @@ -891,29 +903,29 @@ extern int mem_prealloc;
> /* read dirty bit (return 0 or 1) */
> static inline int cpu_physical_memory_is_dirty(ram_addr_t addr)
> {
> - return phys_ram_dirty[addr >> TARGET_PAGE_BITS] == 0xff;
> + return ram.phys_dirty[addr >> TARGET_PAGE_BITS] == 0xff;
> }
>
> static inline int cpu_physical_memory_get_dirty_flags(ram_addr_t addr)
> {
> - return phys_ram_dirty[addr >> TARGET_PAGE_BITS];
> + return ram.phys_dirty[addr >> TARGET_PAGE_BITS];
> }
>
> static inline int cpu_physical_memory_get_dirty(ram_addr_t addr,
> int dirty_flags)
> {
> - return phys_ram_dirty[addr >> TARGET_PAGE_BITS] & dirty_flags;
> + return ram.phys_dirty[addr >> TARGET_PAGE_BITS] & dirty_flags;
> }
>
> static inline void cpu_physical_memory_set_dirty(ram_addr_t addr)
> {
> - phys_ram_dirty[addr >> TARGET_PAGE_BITS] = 0xff;
> + ram.phys_dirty[addr >> TARGET_PAGE_BITS] = 0xff;
> }
>
> static inline int cpu_physical_memory_set_dirty_flags(ram_addr_t addr,
> int dirty_flags)
> {
> - return phys_ram_dirty[addr >> TARGET_PAGE_BITS] |= dirty_flags;
> + return ram.phys_dirty[addr >> TARGET_PAGE_BITS] |= dirty_flags;
> }
>
> static inline void cpu_physical_memory_mask_dirty_range(ram_addr_t start,
> @@ -925,7 +937,7 @@ static inline void
> cpu_physical_memory_mask_dirty_range(ram_addr_t start,
>
> len = length >> TARGET_PAGE_BITS;
> mask = ~dirty_flags;
> - p = phys_ram_dirty + (start >> TARGET_PAGE_BITS);
> + p = ram.phys_dirty + (start >> TARGET_PAGE_BITS);
> for (i = 0; i < len; i++) {
> p[i] &= mask;
> }
> diff --git a/exec.c b/exec.c
> index c60f9e7..d785de3 100644
> --- a/exec.c
> +++ b/exec.c
> @@ -116,21 +116,9 @@ uint8_t *code_gen_ptr;
>
> #if !defined(CONFIG_USER_ONLY)
> int phys_ram_fd;
> -uint8_t *phys_ram_dirty;
> static int in_migration;
>
> -typedef struct RAMBlock {
> - uint8_t *host;
> - ram_addr_t offset;
> - ram_addr_t length;
> - struct RAMBlock *next;
> -} RAMBlock;
> -
> -static RAMBlock *ram_blocks;
> -/* TODO: When we implement (and use) ram deallocation (e.g. for hotplug)
> - then we can no longer assume contiguous ram offsets, and external uses
> - of this variable will break. */
> -ram_addr_t last_ram_offset;
> +RAMList ram = { .blocks = QLIST_HEAD_INITIALIZER(ram) };
> #endif
>
> CPUState *first_cpu;
> @@ -2795,18 +2783,17 @@ ram_addr_t qemu_ram_map(ram_addr_t size, void *host)
>
> new_block->host = host;
>
> - new_block->offset = last_ram_offset;
> + new_block->offset = ram.last_offset;
> new_block->length = size;
>
> - new_block->next = ram_blocks;
> - ram_blocks = new_block;
> + QLIST_INSERT_HEAD(&ram.blocks, new_block, next);
>
> - phys_ram_dirty = qemu_realloc(phys_ram_dirty,
> - (last_ram_offset + size) >> TARGET_PAGE_BITS);
> - memset(phys_ram_dirty + (last_ram_offset >> TARGET_PAGE_BITS),
> + ram.phys_dirty = qemu_realloc(ram.phys_dirty,
> + (ram.last_offset + size) >> TARGET_PAGE_BITS);
> + memset(ram.phys_dirty + (ram.last_offset >> TARGET_PAGE_BITS),
> 0xff, size >> TARGET_PAGE_BITS);
>
> - last_ram_offset += size;
> + ram.last_offset += size;
>
> if (kvm_enabled())
> kvm_setup_guest_memory(new_block->host, size);
> @@ -2864,31 +2851,17 @@ void qemu_ram_free(ram_addr_t addr)
> */
> void *qemu_get_ram_ptr(ram_addr_t addr)
> {
> - RAMBlock *prev;
> - RAMBlock **prevp;
> RAMBlock *block;
>
> - prev = NULL;
> - prevp = &ram_blocks;
> - block = ram_blocks;
> - while (block && (block->offset > addr
> - || block->offset + block->length <= addr)) {
> - if (prev)
> - prevp = &prev->next;
> - prev = block;
> - block = block->next;
> - }
> - if (!block) {
> - fprintf(stderr, "Bad ram offset %" PRIx64 "\n", (uint64_t)addr);
> - abort();
> - }
> - /* Move this entry to to start of the list. */
> - if (prev) {
> - prev->next = block->next;
> - block->next = *prevp;
> - *prevp = block;
> + QLIST_FOREACH(block, &ram.blocks, next) {
> + if (addr - block->offset < block->length) {
> + QLIST_REMOVE(block, next);
> + QLIST_INSERT_HEAD(&ram.blocks, block, next);
> + return block->host + (addr - block->offset);
> + }
> }
> - return block->host + (addr - block->offset);
> +
> + return NULL;
> }
>
> int do_qemu_ram_addr_from_host(void *ptr, ram_addr_t *ram_addr)
> @@ -2896,15 +2869,14 @@ int do_qemu_ram_addr_from_host(void *ptr, ram_addr_t
> *ram_addr)
> RAMBlock *block;
> uint8_t *host = ptr;
>
> - block = ram_blocks;
> - while (block && (block->host > host
> - || block->host + block->length <= host)) {
> - block = block->next;
> + QLIST_FOREACH(block, &ram.blocks, next) {
> + if (host - block->host < block->length) {
> + *ram_addr = block->offset + (host - block->host);
> + return 0;
> + }
> }
> - if (!block)
> - return -1;
> - *ram_addr = block->offset + (host - block->host);
> - return 0;
> +
> + return -1;
> }
>
> /* Some of the softmmu routines need to translate from a host pointer
>
>
[Qemu-devel] [RFC PATCH 3/6] RAMBlock: Add a name field, Alex Williamson, 2010/06/08