[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [Bug 899140] [NEW] Problem with Linux Kernel Traffic Contro
From: |
Vincent Autefage |
Subject: |
[Qemu-devel] [Bug 899140] [NEW] Problem with Linux Kernel Traffic Control |
Date: |
Fri, 02 Dec 2011 12:57:41 -0000 |
Public bug reported:
Hi,
The two last main versions of QEMU (0.15 and 1.0) have an important problem
when running on a Linux distribution which running itself a Traffic Control
(TC) instance.
Indeed, when TC is configured with a Token Bucket Filter (TBF) with a
particular rate, the effective rate is very slower than the desired one.
For instance, lets consider the following configuration :
# tc qdisc add dev eth0 root tbf rate 20mbit burst 20k latency 50ms
The effective rate will be about 100kbit/s ! (verified with iperf)
I've encountered this problem on versions 0.15 and 1.0 but not with the 0.14...
In the 0.14, we have a rate of 19.2 mbit/s which is quiet normal.
I've done the experimentation on several hosts :
- Debian 32bit core i7, 4GB RAM
- Debian 64bit core i7, 8GB RAM
- 3 different high performance servers : Ubuntu 64 bits, 48 AMD Opteron, 128GB
of RAM
The problem is always the same... The problem is also seen with a Class
Based Queuing (CBQ) in TC.
Thanks
** Affects: qemu
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/899140
Title:
Problem with Linux Kernel Traffic Control
Status in QEMU:
New
Bug description:
Hi,
The two last main versions of QEMU (0.15 and 1.0) have an important problem
when running on a Linux distribution which running itself a Traffic Control
(TC) instance.
Indeed, when TC is configured with a Token Bucket Filter (TBF) with a
particular rate, the effective rate is very slower than the desired one.
For instance, lets consider the following configuration :
# tc qdisc add dev eth0 root tbf rate 20mbit burst 20k latency 50ms
The effective rate will be about 100kbit/s ! (verified with iperf)
I've encountered this problem on versions 0.15 and 1.0 but not with the
0.14...
In the 0.14, we have a rate of 19.2 mbit/s which is quiet normal.
I've done the experimentation on several hosts :
- Debian 32bit core i7, 4GB RAM
- Debian 64bit core i7, 8GB RAM
- 3 different high performance servers : Ubuntu 64 bits, 48 AMD Opteron,
128GB of RAM
The problem is always the same... The problem is also seen with a
Class Based Queuing (CBQ) in TC.
Thanks
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/899140/+subscriptions
[Prev in Thread] |
Current Thread |
[Next in Thread] |