qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] Running KVM guest on X86


From: Bhushan Bharat-R65777
Subject: Re: [Qemu-devel] Running KVM guest on X86
Date: Fri, 10 Aug 2012 08:19:49 +0000

> > > >> On Mon, 2012-08-06 at 15:40 +0000, Bhushan Bharat-R65777 wrote:
> > > >> > Hi Avi/All,
> > > >> >
> > > >> > I am facing issue to boot KVM guest on x86 (I used to work on
> > > >> > PowerPC platform
> > > >> and do not have enough knowledge of x86). I am working on making
> > > >> VFIO working on PowerPC Booke, So I have cloned Alex Williamsons
> > > >> git repository, compiled kernel for x86 on fedora with
> > > >> virtualization configuration (selected all kernel config options
> > > >> for same). Run below command to boot Guest (I have not provided vfio
> device yet):
> > > >> >
> > > >> > "qemu-system-x86_64 -enable-kvm -m 1024 -nographic -kernel
> > > >> arch/x86_64/boot/bzImage -initrd /boot/initramfs-3.5.0-rc4+.img
> > > >> -serial tcp::4444,server,telnet"
> > > >> >
> > > >> > After the I can see qemu command line (able to run various
> > > >> > commands like "info
> > > >> registers" etc), while guest does not boot (not even the first print
> comes).
> > > >> >
> > > >> > Can anyone help in what I am missing or doing wrong?
> > > >>
> > > >> x86 doesn't use the serial port for console by default, so you're
> > > >> making things quite a bit more difficult that way.  Typically
> > > >> you'll want to provide a disk image (the -hda option is the
> > > >> easiest way to do this), a display (-vga std -vnc :0 is again
> > > >> easiest), and probably something to install from (-cdrom
> > > >> <image.iso>).  You can also add a -boot d to get it to choose the cdrom
> the first time for install.
> > > >> Thanks,
> > > >
> > > > Thanks Avi and Alex, I can see the KVM guest boot prints by adding
> > > > -append
> > > "console=ttyS0"
> > >
> > > Note, once you get to user space you will need a getty specified in
> > > inittab in order to get a login on your serial port.   Something like:
> > >
> > >    T0:23:respawn:/sbin/getty -L ttyS0
> >
> > 1)
> > I tried booting with prebuilt qcow2 then it works for me:
> > qemu-system-x86_64  -enable-kvm  -nographic  -device sga  -m 1024 -hda
> > debian_squeeze_amd64_standard.qcow2
> >
> > Does anyone help on how I can add my kernel to qcow2? Or create a proper
> qcow2?
> >
> > 2)
> > Also I tried as mentioned in section "3.9 Direct Linux Boot":
> http://qemu.weilnetz.de/qemu-doc.html#disk_005fimages :
> >
> > qemu-kvm  -enable-kvm  -nographic -kernel /boot/vmlinuz-3.5.0+ -hda
> > /boot/initramfs-3.5.0+.img  -append "console=ttyS0 root=/dev/sda" -m
> > 1024
> >
> -hda  /boot/initramfs-3.5.0+.img is incorrect. Should be -hda
> debian_squeeze_amd64_standard.qcow2 -initrd /boot/initramfs-3.5.0+.img and
> root=/dev/sda1 probably.

I tried :
qemu-system-x86_64  -enable-kvm  -nographic  -kernel /boot/vmlinuz-3.5.0+  
-initrd /boot/initramfs-3.5.0+.img  -append "root=/dev/sda1 rw console=ttyS0" 
-m 1024 -hda debian_squeeze_amd64_standard.qcow2

With this I get the login prompt, but it is not taking input character from 
keyboard properly (not able to give login credentials even). Seeing some weird 
behavior, like sometimes it treat normal character as like ENTER pressed.

Below are some boot prints and it is found that there were some junk characters 
after "Setting console screen modes".

--------------
Setting console screen modes.
]Rcannot (un)set powersave mode
[9;30][14;30]Skipping font and keymap setup (handled by console-setup).
Setting up console font and keymap...done.
[   11.547904] rc (278) used greatest stack depth: 1760 bytes left
Starting portmap daemon...Already running..
Starting NFS common utilities: statd.
Starting enhanced syslogd: rsyslogd.
Starting deferred execution scheduler: atd.
Starting ACPI services....
Starting periodic command scheduler: cron.
Starting MTA: exim4.

Debian GNU/Linux 6.0 debian-amd64 ttyS0

debian-amd64 login:
------------

Thanks 
-Bharat





reply via email to

[Prev in Thread] Current Thread [Next in Thread]