[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [Qemu-ppc] [PATCH v9 1/1] Add USB option in machine opt
From: |
Alexander Graf |
Subject: |
Re: [Qemu-devel] [Qemu-ppc] [PATCH v9 1/1] Add USB option in machine options |
Date: |
Sun, 26 Aug 2012 18:59:09 -0700 |
On 26.08.2012, at 10:34, Blue Swirl <address@hidden> wrote:
> On Sat, Aug 25, 2012 at 2:27 PM, Alexander Graf <address@hidden> wrote:
>>
>>
>> On 25.08.2012, at 00:43, Blue Swirl <address@hidden> wrote:
>>
>>> On Wed, Aug 22, 2012 at 10:31 AM, Li Zhang <address@hidden> wrote:
>>>> When -usb option is used, global varible usb_enabled is set.
>>>> And all the plafrom will create one USB controller according
>>>> to this variable. In fact, global varibles make code hard
>>>> to read.
>>>>
>>>> So this patch is to remove global variable usb_enabled and
>>>> add USB option in machine options. All the plaforms will get
>>>> USB option value from machine options.
>>>>
>>>> USB option of machine options will be set either by:
>>>> * -usb
>>>> * -machine type=pseries,usb=on
>>>>
>>>> Both these ways can work now. They both set USB option in
>>>> machine options. In the future, the first way will be removed.
>>>>
>>>> Signed-off-by: Li Zhang <address@hidden>
>>>> ---
>>>> v7->v8 :
>>>> * Declare usb_enabled() and set_usb_option() in sysemu.h
>>>> * Separate USB enablement on sPAPR platform.
>>>>
>>>> v8->v9:
>>>> * Fix usb_enable() default value on sPAPR and MAC99
>>>>
>>>> Signed-off-by: Li Zhang <address@hidden>
>>>>
>>>> diff --git a/hw/nseries.c b/hw/nseries.c
>>>> index 4df2670..c67e95a 100644
>>>> --- a/hw/nseries.c
>>>> +++ b/hw/nseries.c
>>>> @@ -1322,7 +1322,7 @@ static void n8x0_init(ram_addr_t ram_size, const
>>>> char *boot_device,
>>>> n8x0_dss_setup(s);
>>>> n8x0_cbus_setup(s);
>>>> n8x0_uart_setup(s);
>>>> - if (usb_enabled)
>>>> + if (usb_enabled(false))
>>>
>>> Please add braces.
>>>
>>> I don't like this usb_enabled(false) way very much but I don't have
>>> anything better to suggest.
>>>
>>>> n8x0_usb_setup(s);
>>>>
>>>> if (kernel_filename) {
>>>> diff --git a/hw/pc_piix.c b/hw/pc_piix.c
>>>> index 0c0096f..b662192 100644
>>>> --- a/hw/pc_piix.c
>>>> +++ b/hw/pc_piix.c
>>>> @@ -267,7 +267,7 @@ static void pc_init1(MemoryRegion *system_memory,
>>>> pc_cmos_init(below_4g_mem_size, above_4g_mem_size, boot_device,
>>>> floppy, idebus[0], idebus[1], rtc_state);
>>>>
>>>> - if (pci_enabled && usb_enabled) {
>>>> + if (pci_enabled && usb_enabled(false)) {
>>>> pci_create_simple(pci_bus, piix3_devfn + 2, "piix3-usb-uhci");
>>>> }
>>>>
>>>> diff --git a/hw/ppc_newworld.c b/hw/ppc_newworld.c
>>>> index e95cfe8..1d4f494 100644
>>>> --- a/hw/ppc_newworld.c
>>>> +++ b/hw/ppc_newworld.c
>>>> @@ -348,10 +348,6 @@ static void ppc_core99_init (ram_addr_t ram_size,
>>>> ide_mem[1] = pmac_ide_init(hd, pic[0x0d], dbdma, 0x16, pic[0x02]);
>>>> ide_mem[2] = pmac_ide_init(&hd[MAX_IDE_DEVS], pic[0x0e], dbdma, 0x1a,
>>>> pic[0x02]);
>>>>
>>>> - /* cuda also initialize ADB */
>>>> - if (machine_arch == ARCH_MAC99_U3) {
>>>> - usb_enabled = 1;
>>>> - }
>>>> cuda_init(&cuda_mem, pic[0x19]);
>>>>
>>>> adb_kbd_init(&adb_bus);
>>>> @@ -360,15 +356,14 @@ static void ppc_core99_init (ram_addr_t ram_size,
>>>> macio_init(pci_bus, PCI_DEVICE_ID_APPLE_UNI_N_KEYL, 0, pic_mem,
>>>> dbdma_mem, cuda_mem, NULL, 3, ide_mem, escc_bar);
>>>>
>>>> - if (usb_enabled) {
>>>> + if (usb_enabled(machine_arch == ARCH_MAC99_U3)) {
>>>> pci_create_simple(pci_bus, -1, "pci-ohci");
>>>> - }
>>>> -
>>>> - /* U3 needs to use USB for input because Linux doesn't support
>>>> via-cuda
>>>> - on PPC64 */
>>>> - if (machine_arch == ARCH_MAC99_U3) {
>>>> - usbdevice_create("keyboard");
>>>> - usbdevice_create("mouse");
>>>> + /* U3 needs to use USB for input because Linux doesn't support
>>>> via-cuda
>>>> + on PPC64 */
>>>> + if (machine_arch == ARCH_MAC99_U3) {
>>>> + usbdevice_create("keyboard");
>>>> + usbdevice_create("mouse");
>>>> + }
>>>> }
>>>>
>>>> if (graphic_depth != 15 && graphic_depth != 32 && graphic_depth != 8)
>>>> diff --git a/hw/ppc_oldworld.c b/hw/ppc_oldworld.c
>>>> index 1dcd8a6..1468a32 100644
>>>> --- a/hw/ppc_oldworld.c
>>>> +++ b/hw/ppc_oldworld.c
>>>> @@ -286,7 +286,7 @@ static void ppc_heathrow_init (ram_addr_t ram_size,
>>>> macio_init(pci_bus, PCI_DEVICE_ID_APPLE_343S1201, 1, pic_mem,
>>>> dbdma_mem, cuda_mem, nvr, 2, ide_mem, escc_bar);
>>>>
>>>> - if (usb_enabled) {
>>>> + if (usb_enabled(false)) {
>>>> pci_create_simple(pci_bus, -1, "pci-ohci");
>>>> }
>>>>
>>>> diff --git a/hw/ppc_prep.c b/hw/ppc_prep.c
>>>> index 7a87616..feeb903 100644
>>>> --- a/hw/ppc_prep.c
>>>> +++ b/hw/ppc_prep.c
>>>> @@ -662,7 +662,7 @@ static void ppc_prep_init (ram_addr_t ram_size,
>>>> memory_region_add_subregion(sysmem, 0xFEFF0000, xcsr);
>>>> #endif
>>>>
>>>> - if (usb_enabled) {
>>>> + if (usb_enabled(false)) {
>>>> pci_create_simple(pci_bus, -1, "pci-ohci");
>>>> }
>>>>
>>>> diff --git a/hw/pxa2xx.c b/hw/pxa2xx.c
>>>> index d5f1420..4787279 100644
>>>> --- a/hw/pxa2xx.c
>>>> +++ b/hw/pxa2xx.c
>>>> @@ -2108,7 +2108,7 @@ PXA2xxState *pxa270_init(MemoryRegion *address_space,
>>>> s->ssp[i] = (SSIBus *)qdev_get_child_bus(dev, "ssi");
>>>> }
>>>>
>>>> - if (usb_enabled) {
>>>> + if (usb_enabled(false)) {
>>>> sysbus_create_simple("sysbus-ohci", 0x4c000000,
>>>> qdev_get_gpio_in(s->pic, PXA2XX_PIC_USBH1));
>>>> }
>>>> @@ -2239,7 +2239,7 @@ PXA2xxState *pxa255_init(MemoryRegion
>>>> *address_space, unsigned int sdram_size)
>>>> s->ssp[i] = (SSIBus *)qdev_get_child_bus(dev, "ssi");
>>>> }
>>>>
>>>> - if (usb_enabled) {
>>>> + if (usb_enabled(false)) {
>>>> sysbus_create_simple("sysbus-ohci", 0x4c000000,
>>>> qdev_get_gpio_in(s->pic, PXA2XX_PIC_USBH1));
>>>> }
>>>> diff --git a/hw/realview.c b/hw/realview.c
>>>> index 19db4d0..a8d6f97 100644
>>>> --- a/hw/realview.c
>>>> +++ b/hw/realview.c
>>>> @@ -227,7 +227,7 @@ static void realview_init(ram_addr_t ram_size,
>>>> sysbus_connect_irq(busdev, 2, pic[50]);
>>>> sysbus_connect_irq(busdev, 3, pic[51]);
>>>> pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci");
>>>> - if (usb_enabled) {
>>>> + if (usb_enabled(false)) {
>>>> pci_create_simple(pci_bus, -1, "pci-ohci");
>>>> }
>>>> n = drive_get_max_bus(IF_SCSI);
>>>> diff --git a/hw/spapr.c b/hw/spapr.c
>>>> index be533ee..2e31797 100644
>>>> --- a/hw/spapr.c
>>>> +++ b/hw/spapr.c
>>>> @@ -766,7 +766,7 @@ static void ppc_spapr_init(ram_addr_t ram_size,
>>>> spapr->has_graphics = true;
>>>> }
>>>>
>>>> - if (usb_enabled) {
>>>> + if (usb_enabled(spapr->has_graphics)) {
>>>> pci_create_simple(QLIST_FIRST(&spapr->phbs)->host_state.bus,
>>>> -1, "pci-ohci");
>>>> if (spapr->has_graphics) {
>>>> diff --git a/hw/versatilepb.c b/hw/versatilepb.c
>>>> index 7a92034..df32c8b 100644
>>>> --- a/hw/versatilepb.c
>>>> +++ b/hw/versatilepb.c
>>>> @@ -247,7 +247,7 @@ static void versatile_init(ram_addr_t ram_size,
>>>> pci_nic_init_nofail(nd, "rtl8139", NULL);
>>>> }
>>>> }
>>>> - if (usb_enabled) {
>>>> + if (usb_enabled(false)) {
>>>> pci_create_simple(pci_bus, -1, "pci-ohci");
>>>> }
>>>> n = drive_get_max_bus(IF_SCSI);
>>>> diff --git a/qemu-config.c b/qemu-config.c
>>>> index c05ffbc..d1a86cf 100644
>>>> --- a/qemu-config.c
>>>> +++ b/qemu-config.c
>>>> @@ -612,6 +612,10 @@ static QemuOptsList qemu_machine_opts = {
>>>> .name = "dump-guest-core",
>>>> .type = QEMU_OPT_BOOL,
>>>> .help = "Include guest memory in a core dump",
>>>> + },{
>>>> + .name = "usb",
>>>> + .type = QEMU_OPT_BOOL,
>>>> + .help = "Set on/off to enable/disable usb",
>>>> },
>>>> { /* End of list */ }
>>>> },
>>>> diff --git a/sysemu.h b/sysemu.h
>>>> index 65552ac..be0905e 100644
>>>> --- a/sysemu.h
>>>> +++ b/sysemu.h
>>>> @@ -119,7 +119,6 @@ extern const char *keyboard_layout;
>>>> extern int win2k_install_hack;
>>>> extern int alt_grab;
>>>> extern int ctrl_grab;
>>>> -extern int usb_enabled;
>>>> extern int smp_cpus;
>>>> extern int max_cpus;
>>>> extern int cursor_hide;
>>>> @@ -189,4 +188,8 @@ void register_devices(void);
>>>> void add_boot_device_path(int32_t bootindex, DeviceState *dev,
>>>> const char *suffix);
>>>> char *get_boot_devices_list(uint32_t *size);
>>>> +
>>>> +bool usb_enabled(bool default_usb);
>>>> +void set_usb_option(bool usb_option);
>>>> +
>>>> #endif
>>>> diff --git a/vl.c b/vl.c
>>>> index 7c577fa..4702e33 100644
>>>> --- a/vl.c
>>>> +++ b/vl.c
>>>> @@ -203,7 +203,6 @@ CharDriverState *serial_hds[MAX_SERIAL_PORTS];
>>>> CharDriverState *parallel_hds[MAX_PARALLEL_PORTS];
>>>> CharDriverState *virtcon_hds[MAX_VIRTIO_CONSOLES];
>>>> int win2k_install_hack = 0;
>>>> -int usb_enabled = 0;
>>>> int singlestep = 0;
>>>> int smp_cpus = 1;
>>>> int max_cpus = 0;
>>>> @@ -790,6 +789,27 @@ static int parse_sandbox(QemuOpts *opts, void *opaque)
>>>> return 0;
>>>> }
>>>>
>>>> +/*********QEMU USB setting******/
>>>> +bool usb_enabled(bool default_usb)
>>>> +{
>>>> + QemuOpts *mach_opts;
>>>> + mach_opts = qemu_opts_find(qemu_find_opts("machine"), 0);
>>>> + if (mach_opts) {
>>>> + return qemu_opt_get_bool(mach_opts, "usb", default_usb);
>>>> + }
>>>> + return default_usb;
>>>> +}
>>>
>>> It would be more optimal to go through the options only once after
>>> machine selection in vl.c, setting some flags as a result. Then this
>>> and below functions would only check against those flags.
>>
>> This is not a performance critical code path, right? So I'd prefer to have a
>> single point of information (machine opts) rather than yet another global
>> variable.
>
> The flags don't have to be global, they can be static to vl.c.
It would still be duplication of information bits that need to be synchronized.
I don't see any point for the set_usb_option helper. So why bother with another
variable when we have one in the machine opts?
Alex
>
>>
>> Alex
>>
>>>
>>>> +
>>>> +void set_usb_option(bool usb_option)
>>>> +{
>>>> + QemuOpts *mach_opts;
>>>> + mach_opts = qemu_opts_find(qemu_find_opts("machine"), 0);
>>>> + if (mach_opts) {
>>>> + qemu_opt_set_bool(mach_opts, "usb", usb_option);
>>>> + }
>>>> +}
>>>> +
>>>> +
>>>> /***********************************************************/
>>>> /* QEMU Block devices */
>>>>
>>>> @@ -1078,8 +1098,9 @@ static int usb_device_add(const char *devname)
>>>> const char *p;
>>>> USBDevice *dev = NULL;
>>>>
>>>> - if (!usb_enabled)
>>>> + if (!usb_enabled(false)) {
>>>> return -1;
>>>> + }
>>>>
>>>> /* drivers with .usbdevice_name entry in USBDeviceInfo */
>>>> dev = usbdevice_create(devname);
>>>> @@ -1115,8 +1136,9 @@ static int usb_device_del(const char *devname)
>>>> if (strstart(devname, "host:", &p))
>>>> return usb_host_device_close(p);
>>>>
>>>> - if (!usb_enabled)
>>>> + if (!usb_enabled(false)) {
>>>> return -1;
>>>> + }
>>>>
>>>> p = strchr(devname, '.');
>>>> if (!p)
>>>> @@ -3062,10 +3084,10 @@ int main(int argc, char **argv, char **envp)
>>>> }
>>>> break;
>>>> case QEMU_OPTION_usb:
>>>> - usb_enabled = 1;
>>>> + set_usb_option(true);
>>>> break;
>>>> case QEMU_OPTION_usbdevice:
>>>> - usb_enabled = 1;
>>>> + set_usb_option(true);
>>>> add_device_config(DEV_USB, optarg);
>>>> break;
>>>> case QEMU_OPTION_device:
>>>> @@ -3623,7 +3645,7 @@ int main(int argc, char **argv, char **envp)
>>>> current_machine = machine;
>>>>
>>>> /* init USB devices */
>>>> - if (usb_enabled) {
>>>> + if (usb_enabled(false)) {
>>>> if (foreach_device_config(DEV_USB, usb_parse) < 0)
>>>> exit(1);
>>>> }
>>>> --
>>>> 1.7.7.6
>>>>
>>>>
>>>