[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH RFC v2 0/9] hw/pci: set irq without selecting IN
From: |
Marcel Apfelbaum |
Subject: |
Re: [Qemu-devel] [PATCH RFC v2 0/9] hw/pci: set irq without selecting INTx pin |
Date: |
Wed, 02 Oct 2013 16:05:13 +0300 |
On Wed, 2013-10-02 at 15:58 +0300, Michael S. Tsirkin wrote:
> On Wed, Oct 02, 2013 at 03:41:25PM +0300, Marcel Apfelbaum wrote:
> > Note: Added RFC because not all affected devices were
> > checked yet.
>
> What do you have in mind exactly?
Sanity test for *all* modified devices.
Any other thoughts?
>From self code review, I can say that besides 2 devices
(vmxnet3 and vfio), the code is re-factored with
no side effects.
vmxnet3: I reviewed linux driver code and when using legacy interrupts
only INTx 0 is used.
vfio: Also here only INTx 0 is used, so the interface selecting
the interrupt line seems to be unnecessary at least for
legacy interrupts.
>
> > Interrupt pin is selected and saved into PCI_INTERRUPT_PIN
> > register during device initialization. Devices should not call
> > directly qemu_set_irq and specify the INTx pin.
> >
> > Added pci_* wrappers to replace qemu_set_irq, qemu_irq_raise,
> > qemu_irq_lower and qemu_irq_pulse, setting the irq
> > based on PCI_INTERRUPT_PIN.
> >
> > Added interface to allocate and free single irq.
> > Added pci_allocate_irq wrapper to be used by devices that
> > still need PCIDevice infrastructure to assert irqs.
> >
> > Removed irq field from PCIDevice, not needed anymore.
> >
> > Special cases of replacements were done in separate patches,
> > all others in one patch "hw: set interrupts using pci irq wrappers"
>
> Looks good to me overall.
> Acked-by: Michael S. Tsirkin <address@hidden>
>
>
> > Changes from v1:
> > - Addressed Michael S. Tsirkin's comments:
> > - pci_set_irq directly calls pci_irq handler
> > - removed irq field from PCIDevice
> > - Added qemu interface to allocate single irq
> > - Added pci wrappers to allocate and free pci irq
> > - Added pci irq wrappers for all qemu methods
> > setting irq and not only qemu_set_irq
> > - Replace all qemu irq setters with pci
> > wrappers
> >
> > Marcel Apfelbaum (9):
> > hw/core: Add interface to allocate and free a single IRQ
> > hw/pci: add pci wrappers for allocating and asserting irqs
> > hw/pci-bridge: set PCI_INTERRUPT_PIN register before shpc init
> > hw/vmxnet3: set interrupts using pci irq wrappers
> > hw/vfio: set interrupts using pci irq wrappers
> > hw/xhci: set interrupts using pci irq wrappers
> > hw: set interrupts using pci irq wrappers
> > hw/pcie: AER and hot-plug events must use device's interrupt
> > hw/pci: removed irq field from PCIDevice
> >
> > hw/audio/ac97.c | 4 ++--
> > hw/audio/es1370.c | 4 ++--
> > hw/audio/intel-hda.c | 2 +-
> > hw/block/nvme.c | 2 +-
> > hw/char/serial-pci.c | 5 +++--
> > hw/char/tpci200.c | 8 ++++----
> > hw/core/irq.c | 16 ++++++++++++++++
> > hw/display/qxl.c | 2 +-
> > hw/ide/cmd646.c | 2 +-
> > hw/ide/ich.c | 3 ++-
> > hw/isa/vt82c686.c | 2 +-
> > hw/misc/ivshmem.c | 2 +-
> > hw/misc/vfio.c | 11 ++++++-----
> > hw/net/e1000.c | 2 +-
> > hw/net/eepro100.c | 4 ++--
> > hw/net/ne2000.c | 3 ++-
> > hw/net/pcnet-pci.c | 3 ++-
> > hw/net/rtl8139.c | 2 +-
> > hw/net/vmxnet3.c | 13 +++++++++++--
> > hw/pci-bridge/pci_bridge_dev.c | 2 +-
> > hw/pci/pci.c | 26 +++++++++++++++++++++-----
> > hw/pci/pcie.c | 4 ++--
> > hw/pci/pcie_aer.c | 4 ++--
> > hw/pci/shpc.c | 2 +-
> > hw/scsi/esp-pci.c | 3 ++-
> > hw/scsi/lsi53c895a.c | 2 +-
> > hw/scsi/megasas.c | 6 +++---
> > hw/scsi/vmw_pvscsi.c | 2 +-
> > hw/usb/hcd-ehci-pci.c | 2 +-
> > hw/usb/hcd-ohci.c | 2 +-
> > hw/usb/hcd-uhci.c | 2 +-
> > hw/usb/hcd-xhci.c | 7 ++-----
> > hw/virtio/virtio-pci.c | 4 ++--
> > include/hw/irq.h | 7 +++++++
> > include/hw/pci/pci.h | 22 +++++++++++++++++++---
> > include/hw/pci/pcie.h | 18 ------------------
> > 36 files changed, 127 insertions(+), 78 deletions(-)
> >
> > --
> > 1.8.3.1
- [Qemu-devel] [PATCH RFC v2 5/9] hw/vfio: set interrupts using pci irq wrappers, (continued)
- [Qemu-devel] [PATCH RFC v2 5/9] hw/vfio: set interrupts using pci irq wrappers, Marcel Apfelbaum, 2013/10/02
- [Qemu-devel] [PATCH RFC v2 6/9] hw/xhci: set interrupts using pci irq wrappers, Marcel Apfelbaum, 2013/10/02
- [Qemu-devel] [PATCH RFC v2 7/9] hw: set interrupts using pci irq wrappers, Marcel Apfelbaum, 2013/10/02
- [Qemu-devel] [PATCH RFC v2 8/9] hw/pcie: AER and hot-plug events must use device's interrupt, Marcel Apfelbaum, 2013/10/02
- [Qemu-devel] [PATCH RFC v2 9/9] hw/pci: removed irq field from PCIDevice, Marcel Apfelbaum, 2013/10/02
- Re: [Qemu-devel] [PATCH RFC v2 0/9] hw/pci: set irq without selecting INTx pin, Michael S. Tsirkin, 2013/10/02
- Re: [Qemu-devel] [PATCH RFC v2 0/9] hw/pci: set irq without selecting INTx pin,
Marcel Apfelbaum <=