[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH 3/7] tcx: port to test_and_clear instead of test/res
From: |
Juan Quintela |
Subject: |
[Qemu-devel] [PATCH 3/7] tcx: port to test_and_clear instead of test/reset |
Date: |
Fri, 11 Oct 2013 16:20:46 +0200 |
From: Juan Quintela <address@hidden>
Now page_min/max are not needed anymore.
Signed-off-by: Juan Quintela <address@hidden>
---
hw/display/tcx.c | 72 ++++++++++++++------------------------------------------
1 file changed, 18 insertions(+), 54 deletions(-)
diff --git a/hw/display/tcx.c b/hw/display/tcx.c
index 24876d3..d863a55 100644
--- a/hw/display/tcx.c
+++ b/hw/display/tcx.c
@@ -178,45 +178,31 @@ static inline void tcx24_draw_line32(TCXState *s1,
uint8_t *d,
}
}
-static inline int check_dirty(TCXState *s, ram_addr_t page, ram_addr_t page24,
- ram_addr_t cpage)
+static inline int test_and_clear_dirty(TCXState *s, ram_addr_t page,
+ ram_addr_t page24,
+ ram_addr_t cpage)
{
int ret;
- ret = memory_region_get_dirty(&s->vram_mem, page, TARGET_PAGE_SIZE,
- DIRTY_MEMORY_VGA);
- ret |= memory_region_get_dirty(&s->vram_mem, page24, TARGET_PAGE_SIZE * 4,
- DIRTY_MEMORY_VGA);
- ret |= memory_region_get_dirty(&s->vram_mem, cpage, TARGET_PAGE_SIZE * 4,
- DIRTY_MEMORY_VGA);
+ ret = memory_region_test_and_clear_dirty(&s->vram_mem, page,
+ TARGET_PAGE_SIZE,
+ DIRTY_MEMORY_VGA);
+ ret |= memory_region_test_and_clear_dirty(&s->vram_mem, page24,
+ TARGET_PAGE_SIZE * 4,
+ DIRTY_MEMORY_VGA);
+ ret |= memory_region_test_and_clear_dirty(&s->vram_mem, cpage,
+ TARGET_PAGE_SIZE * 4,
+ DIRTY_MEMORY_VGA);
return ret;
}
-static inline void reset_dirty(TCXState *ts, ram_addr_t page_min,
- ram_addr_t page_max, ram_addr_t page24,
- ram_addr_t cpage)
-{
- memory_region_reset_dirty(&ts->vram_mem,
- page_min,
- (page_max - page_min) + TARGET_PAGE_SIZE,
- DIRTY_MEMORY_VGA);
- memory_region_reset_dirty(&ts->vram_mem,
- page24 + page_min * 4,
- (page_max - page_min) * 4 + TARGET_PAGE_SIZE,
- DIRTY_MEMORY_VGA);
- memory_region_reset_dirty(&ts->vram_mem,
- cpage + page_min * 4,
- (page_max - page_min) * 4 + TARGET_PAGE_SIZE,
- DIRTY_MEMORY_VGA);
-}
-
/* Fixed line length 1024 allows us to do nice tricks not possible on
VGA... */
static void tcx_update_display(void *opaque)
{
TCXState *ts = opaque;
DisplaySurface *surface = qemu_console_surface(ts->con);
- ram_addr_t page, page_min, page_max;
+ ram_addr_t page;
int y, y_start, dd, ds;
uint8_t *d, *s;
void (*f)(TCXState *s1, uint8_t *dst, const uint8_t *src, int width);
@@ -227,8 +213,6 @@ static void tcx_update_display(void *opaque)
page = 0;
y_start = -1;
- page_min = -1;
- page_max = 0;
d = surface_data(surface);
s = ts->vram;
dd = surface_stride(surface);
@@ -251,14 +235,11 @@ static void tcx_update_display(void *opaque)
}
for(y = 0; y < ts->height; y += 4, page += TARGET_PAGE_SIZE) {
- if (memory_region_get_dirty(&ts->vram_mem, page, TARGET_PAGE_SIZE,
- DIRTY_MEMORY_VGA)) {
+ if (memory_region_test_and_clear_dirty(&ts->vram_mem, page,
+ TARGET_PAGE_SIZE,
+ DIRTY_MEMORY_VGA)) {
if (y_start < 0)
y_start = y;
- if (page < page_min)
- page_min = page;
- if (page > page_max)
- page_max = page;
f(ts, d, s, ts->width);
d += dd;
s += ds;
@@ -287,20 +268,13 @@ static void tcx_update_display(void *opaque)
dpy_gfx_update(ts->con, 0, y_start,
ts->width, y - y_start);
}
- /* reset modified pages */
- if (page_max >= page_min) {
- memory_region_reset_dirty(&ts->vram_mem,
- page_min,
- (page_max - page_min) + TARGET_PAGE_SIZE,
- DIRTY_MEMORY_VGA);
- }
}
static void tcx24_update_display(void *opaque)
{
TCXState *ts = opaque;
DisplaySurface *surface = qemu_console_surface(ts->con);
- ram_addr_t page, page_min, page_max, cpage, page24;
+ ram_addr_t page, cpage, page24;
int y, y_start, dd, ds;
uint8_t *d, *s;
uint32_t *cptr, *s24;
@@ -313,8 +287,6 @@ static void tcx24_update_display(void *opaque)
page24 = ts->vram24_offset;
cpage = ts->cplane_offset;
y_start = -1;
- page_min = -1;
- page_max = 0;
d = surface_data(surface);
s = ts->vram;
s24 = ts->vram24;
@@ -324,13 +296,9 @@ static void tcx24_update_display(void *opaque)
for(y = 0; y < ts->height; y += 4, page += TARGET_PAGE_SIZE,
page24 += TARGET_PAGE_SIZE, cpage += TARGET_PAGE_SIZE) {
- if (check_dirty(ts, page, page24, cpage)) {
+ if (test_and_clear_dirty(ts, page, page24, cpage)) {
if (y_start < 0)
y_start = y;
- if (page < page_min)
- page_min = page;
- if (page > page_max)
- page_max = page;
tcx24_draw_line32(ts, d, s, ts->width, cptr, s24);
d += dd;
s += ds;
@@ -369,10 +337,6 @@ static void tcx24_update_display(void *opaque)
dpy_gfx_update(ts->con, 0, y_start,
ts->width, y - y_start);
}
- /* reset modified pages */
- if (page_max >= page_min) {
- reset_dirty(ts, page_min, page_max, page24, cpage);
- }
}
static void tcx_invalidate_display(void *opaque)
--
1.8.3.1
- [Qemu-devel] [PATCH 0/7] Make vga devices use test_and_set, Juan Quintela, 2013/10/11
- [Qemu-devel] [PATCH 1/7] vmware_vga: port to test_and_clear instead of test/reset, Juan Quintela, 2013/10/11
- [Qemu-devel] [PATCH 2/7] vga: port to test_and_clear instead of test/reset, Juan Quintela, 2013/10/11
- [Qemu-devel] [PATCH 3/7] tcx: port to test_and_clear instead of test/reset,
Juan Quintela <=
- [Qemu-devel] [PATCH 5/7] g364fb: port to test_and_clear instead of test/reset, Juan Quintela, 2013/10/11
- [Qemu-devel] [PATCH 6/7] framebufer: port to test_and_clear instead of test/reset, Juan Quintela, 2013/10/11
- [Qemu-devel] [PATCH 7/7] exynox4210: port to test_and_clear instead of test/reset, Juan Quintela, 2013/10/11
- [Qemu-devel] [PATCH 4/7] sm501: port to test_and_clear instead of test/reset, Juan Quintela, 2013/10/11