[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v8 1/4] sPAPR: Implement EEH RTAS calls
|
From: |
Gavin Shan |
|
Subject: |
[Qemu-devel] [PATCH v8 1/4] sPAPR: Implement EEH RTAS calls |
|
Date: |
Thu, 5 Jun 2014 16:53:38 +1000 |
The emulation for EEH RTAS requests from guest isn't covered
by QEMU yet and the patch implements them.
The patch defines constants used by EEH RTAS calls and adds
callback sPAPRPHBClass::eeh_handler, which is going to be used
this way:
1. RTAS calls are received in spapr_pci.c, sanity check is done
there.
2. RTAS handlers handle what they can. If there is something it
cannot handle and sPAPRPHBClass::eeh_handler callback is defined,
it is called.
3. sPAPRPHBClass::eeh_handler is only implemented for VFIO now. It
does ioctl() to the IOMMU container fd to complete the call. Error
codes from that ioctl() are transferred back to the guest.
This adds 6 RTAS handlers, all defined in SPAPR specification:
1) ibm,set-eeh-option: disables/enables EEH on a device, removes PE from
stopped state;
2) ibm,get-config-addr-info2 - returns fabric configuration address (upper
PCI bridge or PHB if there is no bridge);
3) ibm,read-slot-reset-state2 - retrieve PE state;
4) ibm,set-slot-reset - issue PE reset;
5) ibm,configure-pe - configure PCI bridges in the affected PE;
6) ibm,slot-error-detail - retrieve EEH error log;
All calls use fabric configuration address (a.k.a. PE address) as a target
address except ibm,get-config-addr-info2 and one case (enable EEH on the
specified PCI function) for ibm,set-eeh-option.
Signed-off-by: Gavin Shan <address@hidden>
---
hw/ppc/spapr_pci.c | 248 ++++++++++++++++++++++++++++++++++++++++++++
include/hw/pci-host/spapr.h | 7 ++
include/hw/ppc/spapr.h | 33 ++++++
3 files changed, 288 insertions(+)
diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
index a9f307a..423e4ff 100644
--- a/hw/ppc/spapr_pci.c
+++ b/hw/ppc/spapr_pci.c
@@ -422,6 +422,241 @@ static void
rtas_ibm_query_interrupt_source_number(PowerPCCPU *cpu,
rtas_st(rets, 2, 1);/* 0 == level; 1 == edge */
}
+static int rtas_finish_eeh_request(sPAPRPHBState *sphb,
+ uint32_t req, uint32_t opt,
+ target_ulong rets)
+{
+ sPAPRPHBClass *info = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(sphb);
+ int ret;
+
+ ret = info->eeh_handler(sphb, req, opt);
+ if (ret >= 0) {
+ rtas_st(rets, 0, RTAS_OUT_SUCCESS);
+ } else {
+ rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
+ }
+
+ return ret;
+}
+
+static void rtas_ibm_set_eeh_option(PowerPCCPU *cpu,
+ sPAPREnvironment *spapr,
+ uint32_t token, uint32_t nargs,
+ target_ulong args, uint32_t nret,
+ target_ulong rets)
+{
+ uint32_t addr, option;
+ uint64_t buid = ((uint64_t)rtas_ld(args, 1) << 32) | rtas_ld(args, 2);
+ sPAPRPHBState *sphb = spapr_find_phb(spapr, buid);
+ sPAPRPHBClass *info = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(sphb);
+
+ if (!sphb || !info->eeh_handler) {
+ goto param_error_exit;
+ }
+
+ if ((nargs != 4) || (nret != 1)) {
+ goto param_error_exit;
+ }
+
+ addr = rtas_ld(args, 0);
+ option = rtas_ld(args, 3);
+ switch (option) {
+ case RTAS_EEH_ENABLE:
+ if (!find_dev(spapr, buid, addr)) {
+ goto param_error_exit;
+ }
+ break;
+ case RTAS_EEH_DISABLE:
+ case RTAS_EEH_THAW_IO:
+ case RTAS_EEH_THAW_DMA:
+ break;
+ default:
+ goto param_error_exit;
+ }
+
+ rtas_finish_eeh_request(sphb, RTAS_EEH_REQ_SET_OPTION, option, rets);
+ return;
+
+param_error_exit:
+ rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
+}
+
+static void rtas_ibm_get_config_addr_info2(PowerPCCPU *cpu,
+ sPAPREnvironment *spapr,
+ uint32_t token, uint32_t nargs,
+ target_ulong args, uint32_t nret,
+ target_ulong rets)
+{
+ uint32_t addr, option;
+ uint64_t buid = ((uint64_t)rtas_ld(args, 1) << 32) | rtas_ld(args, 2);
+ sPAPRPHBState *sphb = spapr_find_phb(spapr, buid);
+ sPAPRPHBClass *info = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(sphb);
+ PCIDevice *pdev;
+
+ if (!sphb || !info->eeh_handler) {
+ goto param_error_exit;
+ }
+
+ if ((nargs != 4) || (nret != 2)) {
+ goto param_error_exit;
+ }
+
+ addr = rtas_ld(args, 0);
+ option = rtas_ld(args, 3);
+ if (option != RTAS_GET_PE_ADDR && option != RTAS_GET_PE_MODE) {
+ goto param_error_exit;
+ }
+
+ pdev = find_dev(spapr, buid, addr);
+ if (!pdev) {
+ goto param_error_exit;
+ }
+
+ /*
+ * For now, we always have bus level PE whose address
+ * has format "00BBSS00". The guest OS might regard
+ * PE address 0 as invalid. We avoid that simply by
+ * extending it with one.
+ */
+ rtas_st(rets, 0, RTAS_OUT_SUCCESS);
+ if (option == RTAS_GET_PE_ADDR) {
+ rtas_st(rets, 1, (pci_bus_num(pdev->bus) << 16) + 1);
+ } else {
+ rtas_st(rets, 1, RTAS_PE_MODE_SHARED);
+ }
+
+ return;
+
+param_error_exit:
+ rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
+}
+
+static void rtas_ibm_read_slot_reset_state2(PowerPCCPU *cpu,
+ sPAPREnvironment *spapr,
+ uint32_t token, uint32_t nargs,
+ target_ulong args, uint32_t nret,
+ target_ulong rets)
+{
+ uint64_t buid = ((uint64_t)rtas_ld(args, 1) << 32) | rtas_ld(args, 2);
+ sPAPRPHBState *sphb = spapr_find_phb(spapr, buid);
+ sPAPRPHBClass *info = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(sphb);
+ int32_t ret;
+
+ if (!sphb || !info->eeh_handler) {
+ goto param_error_exit;
+ }
+
+ if ((nargs != 3) || (nret != 4 && nret != 5)) {
+ goto param_error_exit;
+ }
+
+ ret = rtas_finish_eeh_request(sphb, RTAS_EEH_REQ_GET_STATE, 0, rets);
+ if (ret >= 0) {
+ rtas_st(rets, 1, ret);
+ rtas_st(rets, 2, RTAS_EEH_SUPPORT);
+ rtas_st(rets, 3, RTAS_EEH_PE_UNAVAIL_INFO);
+ if (nret >= 5) {
+ rtas_st(rets, 4, RTAS_EEH_PE_RECOVER_INFO);
+ }
+ }
+
+ return;
+
+param_error_exit:
+ rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
+}
+
+static void rtas_ibm_set_slot_reset(PowerPCCPU *cpu,
+ sPAPREnvironment *spapr,
+ uint32_t token, uint32_t nargs,
+ target_ulong args, uint32_t nret,
+ target_ulong rets)
+{
+ uint32_t option;
+ uint64_t buid = ((uint64_t)rtas_ld(args, 1) << 32) | rtas_ld(args, 2);
+ sPAPRPHBState *sphb = spapr_find_phb(spapr, buid);
+ sPAPRPHBClass *info = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(sphb);
+
+ if (!sphb || !info->eeh_handler) {
+ goto param_error_exit;
+ }
+
+ if ((nargs != 4) || (nret != 1)) {
+ goto param_error_exit;
+ }
+
+ option = rtas_ld(args, 3);
+ if (option != RTAS_SLOT_RESET_DEACTIVATE &&
+ option != RTAS_SLOT_RESET_HOT &&
+ option != RTAS_SLOT_RESET_FUNDAMENTAL) {
+ goto param_error_exit;
+ }
+
+ rtas_finish_eeh_request(sphb, RTAS_EEH_REQ_RESET, option, rets);
+ return;
+
+param_error_exit:
+ rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
+}
+
+static void rtas_ibm_configure_pe(PowerPCCPU *cpu,
+ sPAPREnvironment *spapr,
+ uint32_t token, uint32_t nargs,
+ target_ulong args, uint32_t nret,
+ target_ulong rets)
+{
+ uint64_t buid = ((uint64_t)rtas_ld(args, 1) << 32) | rtas_ld(args, 2);
+ sPAPRPHBState *sphb = spapr_find_phb(spapr, buid);
+ sPAPRPHBClass *info = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(sphb);
+
+ if (!sphb || !info->eeh_handler) {
+ goto param_error_exit;
+ }
+
+ if ((nargs != 3) || (nret != 1)) {
+ goto param_error_exit;
+ }
+
+ rtas_finish_eeh_request(sphb, RTAS_EEH_REQ_CONFIGURE, 0, rets);
+ return;
+
+param_error_exit:
+ rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
+}
+
+/* To support it later */
+static void rtas_ibm_slot_error_detail(PowerPCCPU *cpu,
+ sPAPREnvironment *spapr,
+ uint32_t token, uint32_t nargs,
+ target_ulong args, uint32_t nret,
+ target_ulong rets)
+{
+ int option;
+ uint64_t buid = ((uint64_t)rtas_ld(args, 1) << 32) | rtas_ld(args, 2);
+ sPAPRPHBState *sphb = spapr_find_phb(spapr, buid);
+ sPAPRPHBClass *info = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(sphb);
+
+ if (!sphb || !info->eeh_handler) {
+ goto param_error_exit;
+ }
+
+ if ((nargs != 8) || (nret != 1)) {
+ goto param_error_exit;
+ }
+
+ option = rtas_ld(args, 7);
+ if (option != RTAS_SLOT_TEMP_ERR_LOG &&
+ option != RTAS_SLOT_PERM_ERR_LOG) {
+ goto param_error_exit;
+ }
+
+ rtas_st(rets, 0, RTAS_OUT_SUCCESS);
+ return;
+
+param_error_exit:
+ rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR);
+}
+
static int pci_spapr_swizzle(int slot, int pin)
{
return (slot + pin) % PCI_NUM_PINS;
@@ -941,6 +1176,19 @@ void spapr_pci_rtas_init(void)
rtas_ibm_query_interrupt_source_number);
spapr_rtas_register("ibm,change-msi", rtas_ibm_change_msi);
}
+
+ spapr_rtas_register("ibm,set-eeh-option",
+ rtas_ibm_set_eeh_option);
+ spapr_rtas_register("ibm,get-config-addr-info2",
+ rtas_ibm_get_config_addr_info2);
+ spapr_rtas_register("ibm,read-slot-reset-state2",
+ rtas_ibm_read_slot_reset_state2);
+ spapr_rtas_register("ibm,set-slot-reset",
+ rtas_ibm_set_slot_reset);
+ spapr_rtas_register("ibm,configure-pe",
+ rtas_ibm_configure_pe);
+ spapr_rtas_register("ibm,slot-error-detail",
+ rtas_ibm_slot_error_detail);
}
static void spapr_pci_register_types(void)
diff --git a/include/hw/pci-host/spapr.h b/include/hw/pci-host/spapr.h
index a695f12..d16f29b 100644
--- a/include/hw/pci-host/spapr.h
+++ b/include/hw/pci-host/spapr.h
@@ -51,6 +51,7 @@ struct sPAPRPHBClass {
PCIHostBridgeClass parent_class;
void (*finish_realize)(sPAPRPHBState *sphb, Error **errp);
+ int (*eeh_handler)(sPAPRPHBState *sphb, int req, int opt);
};
typedef struct sPAPRPHBState {
@@ -105,6 +106,12 @@ struct sPAPRPHBVFIOState {
#define SPAPR_PCI_MEM_WIN_BUS_OFFSET 0x80000000ULL
+/* EEH related requests */
+#define RTAS_EEH_REQ_SET_OPTION 0
+#define RTAS_EEH_REQ_GET_STATE 1
+#define RTAS_EEH_REQ_RESET 2
+#define RTAS_EEH_REQ_CONFIGURE 3
+
static inline qemu_irq spapr_phb_lsi_qirq(struct sPAPRPHBState *phb, int pin)
{
return xics_get_qirq(spapr->icp, phb->lsi_table[pin].irq);
diff --git a/include/hw/ppc/spapr.h b/include/hw/ppc/spapr.h
index f1d307f..c9416c0 100644
--- a/include/hw/ppc/spapr.h
+++ b/include/hw/ppc/spapr.h
@@ -342,6 +342,39 @@ static inline int spapr_allocate_lsi(int hint)
return spapr_allocate_irq(hint, true);
}
+/* ibm,set-eeh-option */
+#define RTAS_EEH_DISABLE 0
+#define RTAS_EEH_ENABLE 1
+#define RTAS_EEH_THAW_IO 2
+#define RTAS_EEH_THAW_DMA 3
+
+/* ibm,get-config-addr-info2 */
+#define RTAS_GET_PE_ADDR 0
+#define RTAS_GET_PE_MODE 1
+#define RTAS_PE_MODE_NONE 0
+#define RTAS_PE_MODE_NOT_SHARED 1
+#define RTAS_PE_MODE_SHARED 2
+
+/* ibm,read-slot-reset-state2 */
+#define RTAS_EEH_PE_STATE_NORMAL 0
+#define RTAS_EEH_PE_STATE_RESET 1
+#define RTAS_EEH_PE_STATE_STOPPED_IO_DMA 2
+#define RTAS_EEH_PE_STATE_STOPPED_DMA 4
+#define RTAS_EEH_PE_STATE_UNAVAIL 5
+#define RTAS_EEH_NOT_SUPPORT 0
+#define RTAS_EEH_SUPPORT 1
+#define RTAS_EEH_PE_UNAVAIL_INFO 1000
+#define RTAS_EEH_PE_RECOVER_INFO 0
+
+/* ibm,set-slot-reset */
+#define RTAS_SLOT_RESET_DEACTIVATE 0
+#define RTAS_SLOT_RESET_HOT 1
+#define RTAS_SLOT_RESET_FUNDAMENTAL 3
+
+/* ibm,slot-error-detail */
+#define RTAS_SLOT_TEMP_ERR_LOG 1
+#define RTAS_SLOT_PERM_ERR_LOG 2
+
/* RTAS return codes */
#define RTAS_OUT_SUCCESS 0
#define RTAS_OUT_NO_ERRORS_FOUND 1
--
1.8.3.2