[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v2 1/2] vl: allow other threads to do qemu_system_vm
From: |
Paolo Bonzini |
Subject: |
[Qemu-devel] [PATCH v2 1/2] vl: allow other threads to do qemu_system_vmstop_request |
Date: |
Thu, 5 Jun 2014 14:53:58 +0200 |
There patch protects vmstop_requested with a lock and introduces
qemu_system_vmstop_request_prepare.
Together with the new call to qemu_vmstop_requested in vm_start,
qemu_system_vmstop_request_prepare avoids a race where the VM could remain
stopped even though the iostatus of a block device has already been set
(for example).
qemu_system_vmstop_request_prepare however also lets the caller thread
delay observation of the state change until it has itself communicated
that change to the user. This delay avoids any possibility of a wrong
reordering of the BLOCK_IO_ERROR event and the subsequent STOP event.
Signed-off-by: Paolo Bonzini <address@hidden>
---
cpus.c | 1 +
include/sysemu/sysemu.h | 1 +
target-lm32/op_helper.c | 2 +-
vl.c | 85 +++++++++++++++++++++++++++++++------------------
4 files changed, 57 insertions(+), 32 deletions(-)
diff --git a/cpus.c b/cpus.c
index dd7ac13..f566a88 100644
--- a/cpus.c
+++ b/cpus.c
@@ -1206,6 +1206,7 @@ void cpu_stop_current(void)
int vm_stop(RunState state)
{
if (qemu_in_vcpu_thread()) {
+ qemu_system_vmstop_request_prepare();
qemu_system_vmstop_request(state);
/*
* FIXME: should not return to device code in case
diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h
index ba5c7f8..0a2f2bb 100644
--- a/include/sysemu/sysemu.h
+++ b/include/sysemu/sysemu.h
@@ -60,6 +60,7 @@ void qemu_system_powerdown_request(void);
void qemu_register_powerdown_notifier(Notifier *notifier);
void qemu_system_debug_request(void);
void qemu_system_vmstop_request(RunState reason);
+void qemu_system_vmstop_request_prepare(void);
int qemu_shutdown_requested_get(void);
int qemu_reset_requested_get(void);
void qemu_system_killed(int signal, pid_t pid);
diff --git a/target-lm32/op_helper.c b/target-lm32/op_helper.c
index 40fbed6..25ad09a 100644
--- a/target-lm32/op_helper.c
+++ b/target-lm32/op_helper.c
@@ -52,7 +52,7 @@ void HELPER(ill)(CPULM32State *env)
fprintf(stderr, "VM paused due to illegal instruction. "
"Connect a debugger or switch to the monitor console "
"to find out more.\n");
- qemu_system_vmstop_request(RUN_STATE_PAUSED);
+ vm_stop(RUN_STATE_PAUSED);
cs->halted = 1;
raise_exception(env, EXCP_HALTED);
#endif
diff --git a/vl.c b/vl.c
index 0c15608..229a8d1 100644
--- a/vl.c
+++ b/vl.c
@@ -567,6 +567,10 @@ static int default_driver_check(QemuOpts *opts, void
*opaque)
static RunState current_run_state = RUN_STATE_PRELAUNCH;
+/* We use RUN_STATE_MAX but any invalid value will do */
+static RunState vmstop_requested = RUN_STATE_MAX;
+static QemuMutex vmstop_lock;
+
typedef struct {
RunState from;
RunState to;
@@ -643,10 +647,11 @@ static void runstate_init(void)
const RunStateTransition *p;
memset(&runstate_valid_transitions, 0, sizeof(runstate_valid_transitions));
-
for (p = &runstate_transitions_def[0]; p->from != RUN_STATE_MAX; p++) {
runstate_valid_transitions[p->from][p->to] = true;
}
+
+ qemu_mutex_init(&vmstop_lock);
}
/* This function will abort() on invalid state transitions */
@@ -686,6 +691,54 @@ StatusInfo *qmp_query_status(Error **errp)
return info;
}
+static bool qemu_vmstop_requested(RunState *r)
+{
+ qemu_mutex_lock(&vmstop_lock);
+ *r = vmstop_requested;
+ vmstop_requested = RUN_STATE_MAX;
+ qemu_mutex_unlock(&vmstop_lock);
+ return *r < RUN_STATE_MAX;
+}
+
+void qemu_system_vmstop_request_prepare(void)
+{
+ qemu_mutex_lock(&vmstop_lock);
+}
+
+void qemu_system_vmstop_request(RunState state)
+{
+ vmstop_requested = state;
+ qemu_mutex_unlock(&vmstop_lock);
+ qemu_notify_event();
+}
+
+void vm_start(void)
+{
+ RunState requested;
+
+ qemu_vmstop_requested(&requested);
+ if (runstate_is_running() && requested == RUN_STATE_MAX) {
+ return;
+ }
+
+ /* Ensure that a STOP/RESUME pair of events is emitted if a
+ * vmstop request was pending. The BLOCK_IO_ERROR event, for
+ * example, according to documentation is always followed by
+ * the STOP event.
+ */
+ if (runstate_is_running()) {
+ monitor_protocol_event(QEVENT_STOP, NULL);
+ } else {
+ cpu_enable_ticks();
+ runstate_set(RUN_STATE_RUNNING);
+ vm_state_notify(1, RUN_STATE_RUNNING);
+ resume_all_vcpus();
+ }
+
+ monitor_protocol_event(QEVENT_RESUME, NULL);
+}
+
+
/***********************************************************/
/* real time host monotonic timer */
@@ -1747,17 +1800,6 @@ void vm_state_notify(int running, RunState state)
}
}
-void vm_start(void)
-{
- if (!runstate_is_running()) {
- cpu_enable_ticks();
- runstate_set(RUN_STATE_RUNNING);
- vm_state_notify(1, RUN_STATE_RUNNING);
- resume_all_vcpus();
- monitor_protocol_event(QEVENT_RESUME, NULL);
- }
-}
-
/* reset/shutdown handler */
typedef struct QEMUResetEntry {
@@ -1782,7 +1824,6 @@ static NotifierList suspend_notifiers =
static NotifierList wakeup_notifiers =
NOTIFIER_LIST_INITIALIZER(wakeup_notifiers);
static uint32_t wakeup_reason_mask = ~(1 << QEMU_WAKEUP_REASON_NONE);
-static RunState vmstop_requested = RUN_STATE_MAX;
int qemu_shutdown_requested_get(void)
{
@@ -1850,18 +1891,6 @@ static int qemu_debug_requested(void)
return r;
}
-/* We use RUN_STATE_MAX but any invalid value will do */
-static bool qemu_vmstop_requested(RunState *r)
-{
- if (vmstop_requested < RUN_STATE_MAX) {
- *r = vmstop_requested;
- vmstop_requested = RUN_STATE_MAX;
- return true;
- }
-
- return false;
-}
-
void qemu_register_reset(QEMUResetHandler *func, void *opaque)
{
QEMUResetEntry *re = g_malloc0(sizeof(QEMUResetEntry));
@@ -2011,12 +2040,6 @@ void qemu_system_debug_request(void)
qemu_notify_event();
}
-void qemu_system_vmstop_request(RunState state)
-{
- vmstop_requested = state;
- qemu_notify_event();
-}
-
static bool main_loop_should_exit(void)
{
RunState r;
--
1.8.3.1