[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v4 7/9] virtio-blk: Convert VirtIOBlockReq.out to st
From: |
Fam Zheng |
Subject: |
[Qemu-devel] [PATCH v4 7/9] virtio-blk: Convert VirtIOBlockReq.out to structrue |
Date: |
Wed, 11 Jun 2014 12:11:48 +0800 |
The virtio code currently assumes that the outhdr is in its own iovec.
This is not guaranteed by the spec, so we should relax this assumption.
Convert the VirtIOBlockReq.out field to structrue so that we can use
iov_to_buf and then discard the header from the beginning of iovec.
Suggested-by: Paolo Bonzini <address@hidden>
Signed-off-by: Fam Zheng <address@hidden>
Reviewed-by: Paolo Bonzini <address@hidden>
---
hw/block/virtio-blk.c | 20 ++++++++++++++------
include/hw/virtio/virtio-blk.h | 2 +-
2 files changed, 15 insertions(+), 7 deletions(-)
diff --git a/hw/block/virtio-blk.c b/hw/block/virtio-blk.c
index 26285ff..09b6b60 100644
--- a/hw/block/virtio-blk.c
+++ b/hw/block/virtio-blk.c
@@ -12,6 +12,7 @@
*/
#include "qemu-common.h"
+#include "qemu/iov.h"
#include "qemu/error-report.h"
#include "trace.h"
#include "hw/block/block.h"
@@ -81,7 +82,7 @@ static void virtio_blk_rw_complete(void *opaque, int ret)
trace_virtio_blk_rw_complete(req, ret);
if (ret) {
- bool is_read = !(ldl_p(&req->out->type) & VIRTIO_BLK_T_OUT);
+ bool is_read = !(ldl_p(&req->out.type) & VIRTIO_BLK_T_OUT);
if (virtio_blk_handle_rw_error(req, -ret, is_read))
return;
}
@@ -287,7 +288,7 @@ static void virtio_blk_handle_write(VirtIOBlockReq *req,
MultiReqBuffer *mrb)
BlockRequest *blkreq;
uint64_t sector;
- sector = ldq_p(&req->out->sector);
+ sector = ldq_p(&req->out.sector);
bdrv_acct_start(req->dev->bs, &req->acct, req->qiov.size, BDRV_ACCT_WRITE);
@@ -321,7 +322,7 @@ static void virtio_blk_handle_read(VirtIOBlockReq *req)
{
uint64_t sector;
- sector = ldq_p(&req->out->sector);
+ sector = ldq_p(&req->out.sector);
bdrv_acct_start(req->dev->bs, &req->acct, req->qiov.size, BDRV_ACCT_READ);
@@ -344,22 +345,29 @@ static void virtio_blk_handle_request(VirtIOBlockReq *req,
MultiReqBuffer *mrb)
{
uint32_t type;
+ struct iovec *iov = req->elem->out_sg;
+ unsigned out_num = req->elem->out_num;
if (req->elem->out_num < 1 || req->elem->in_num < 1) {
error_report("virtio-blk missing headers");
exit(1);
}
- if (req->elem->out_sg[0].iov_len < sizeof(*req->out) ||
+ if (req->elem->out_sg[0].iov_len < sizeof(req->out) ||
req->elem->in_sg[req->elem->in_num - 1].iov_len < sizeof(*req->in)) {
error_report("virtio-blk header not in correct element");
exit(1);
}
- req->out = (void *)req->elem->out_sg[0].iov_base;
+ if (unlikely(iov_to_buf(iov, out_num, 0, &req->out,
+ sizeof(req->out)) != sizeof(req->out))) {
+ error_report("virtio-blk request outhdr too short");
+ exit(1);
+ }
+ iov_discard_front(&iov, &out_num, sizeof(req->out));
req->in = (void *)req->elem->in_sg[req->elem->in_num - 1].iov_base;
- type = ldl_p(&req->out->type);
+ type = ldl_p(&req->out.type);
if (type & VIRTIO_BLK_T_FLUSH) {
virtio_blk_handle_flush(req, mrb);
diff --git a/include/hw/virtio/virtio-blk.h b/include/hw/virtio/virtio-blk.h
index b495e42..2571e96 100644
--- a/include/hw/virtio/virtio-blk.h
+++ b/include/hw/virtio/virtio-blk.h
@@ -138,7 +138,7 @@ typedef struct VirtIOBlockReq {
VirtIOBlock *dev;
VirtQueueElement *elem;
struct virtio_blk_inhdr *in;
- struct virtio_blk_outhdr *out;
+ struct virtio_blk_outhdr out;
QEMUIOVector qiov;
struct VirtIOBlockReq *next;
BlockAcctCookie acct;
--
2.0.0
- [Qemu-devel] [PATCH v4 0/9] virtio-blk: Converge VirtIOBlockRequest into VirtIOBlockReq, Fam Zheng, 2014/06/11
- [Qemu-devel] [PATCH v4 1/9] virtio-blk: Move VirtIOBlockReq to header, Fam Zheng, 2014/06/11
- [Qemu-devel] [PATCH v4 2/9] virtio-blk: Convert VirtIOBlockReq.elem to pointer, Fam Zheng, 2014/06/11
- [Qemu-devel] [PATCH v4 4/9] virtio-blk: Drop VirtIOBlockRequest.read, Fam Zheng, 2014/06/11
- [Qemu-devel] [PATCH v4 3/9] virtio-blk: Drop bounce buffer from dataplane code, Fam Zheng, 2014/06/11
- [Qemu-devel] [PATCH v4 5/9] virtio-blk: Replace VirtIOBlockRequest with VirtIOBlockReq, Fam Zheng, 2014/06/11
- [Qemu-devel] [PATCH v4 6/9] virtio-blk: Use VirtIOBlockReq.in to drop VirtIOBlockReq.inhdr, Fam Zheng, 2014/06/11
- [Qemu-devel] [PATCH v4 7/9] virtio-blk: Convert VirtIOBlockReq.out to structrue,
Fam Zheng <=
- [Qemu-devel] [PATCH v4 8/9] virtio-blk: Fill in VirtIOBlockReq.out in dataplane code, Fam Zheng, 2014/06/11
- [Qemu-devel] [PATCH v4 9/9] virtio-blk: Fix and clean up the in_sg and out_sg check, Fam Zheng, 2014/06/11
- Re: [Qemu-devel] [PATCH v4 0/9] virtio-blk: Converge VirtIOBlockRequest into VirtIOBlockReq, Stefan Hajnoczi, 2014/06/27