[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v2 04/22] target-mips: move LL and SC instructions
From: |
Leon Alrae |
Subject: |
[Qemu-devel] [PATCH v2 04/22] target-mips: move LL and SC instructions |
Date: |
Wed, 11 Jun 2014 16:19:34 +0100 |
The encoding of LL and SC instruction has changed in MIPS32 Release 6.
Signed-off-by: Leon Alrae <address@hidden>
Reviewed-by: Aurelien Jarno <address@hidden>
---
disas/mips.c | 9 ++++++++-
target-mips/translate.c | 29 +++++++++++++++++++++++++++--
2 files changed, 35 insertions(+), 3 deletions(-)
diff --git a/disas/mips.c b/disas/mips.c
index b950e53..f41b89d 100644
--- a/disas/mips.c
+++ b/disas/mips.c
@@ -119,6 +119,8 @@ see <http://www.gnu.org/licenses/>. */
#define OP_SH_IMMEDIATE 0
#define OP_MASK_DELTA 0xffff
#define OP_SH_DELTA 0
+#define OP_MASK_DELTA_R6 0x1ff
+#define OP_SH_DELTA_R6 7
#define OP_MASK_FUNCT 0x3f
#define OP_SH_FUNCT 0
#define OP_MASK_SPEC 0x3f
@@ -1215,6 +1217,8 @@ const struct mips_opcode mips_builtin_opcodes[] =
them first. The assemblers uses a hash table based on the
instruction name anyhow. */
/* name, args, match, mask, pinfo,
membership */
+{"ll", "t,o(b)", 0x7c000036, 0xfc00003f, LDD|RD_b|WR_t, 0,
I32R6},
+{"sc", "t,o(b)", 0x7c000026, 0xfc00003f, LDD|RD_b|WR_t, 0,
I32R6},
{"seleqz", "d,v,t", 0x00000035, 0xfc0007ff, WR_d|RD_s|RD_t, 0,
I32R6},
{"selnez", "d,v,t", 0x00000037, 0xfc0007ff, WR_d|RD_s|RD_t, 0,
I32R6},
{"pref", "k,o(b)", 0xcc000000, 0xfc000000, RD_b, 0,
I4|I32|G3 },
@@ -3734,7 +3738,10 @@ print_insn_args (const char *d,
case 'j': /* Same as i, but sign-extended. */
case 'o':
- delta = (l >> OP_SH_DELTA) & OP_MASK_DELTA;
+ delta = (opp->membership == I32R6) ?
+ (l >> OP_SH_DELTA_R6) & OP_MASK_DELTA_R6 :
+ (l >> OP_SH_DELTA) & OP_MASK_DELTA;
+
if (delta & 0x8000)
delta |= ~0xffff;
(*info->fprintf_func) (info->stream, "%d",
diff --git a/target-mips/translate.c b/target-mips/translate.c
index 4eb8a61..75b28e2 100644
--- a/target-mips/translate.c
+++ b/target-mips/translate.c
@@ -345,6 +345,10 @@ enum {
/* MIPS DSP Accumulator and DSPControl Access Sub-class */
OPC_EXTR_W_DSP = 0x38 | OPC_SPECIAL3,
OPC_DEXTR_W_DSP = 0x3C | OPC_SPECIAL3,
+
+ /* R6 */
+ R6_OPC_LL = 0x36 | OPC_SPECIAL3,
+ R6_OPC_SC = 0x26 | OPC_SPECIAL3,
};
/* BSHFL opcodes */
@@ -1771,6 +1775,7 @@ static void gen_ld(DisasContext *ctx, uint32_t opc,
opn = "lwr";
break;
case OPC_LL:
+ case R6_OPC_LL:
save_cpu_state(ctx, 1);
op_ld_ll(t0, t0, ctx);
gen_store_gpr(t0, rt);
@@ -1864,6 +1869,7 @@ static void gen_st_cond (DisasContext *ctx, uint32_t opc,
int rt,
break;
#endif
case OPC_SC:
+ case R6_OPC_SC:
save_cpu_state(ctx, 1);
op_st_sc(t1, t0, rt, ctx);
opn = "sc";
@@ -14753,6 +14759,10 @@ static void decode_opc (CPUMIPSState *env,
DisasContext *ctx)
case OPC_SPECIAL3:
op1 = MASK_SPECIAL3(ctx->opcode);
switch (op1) {
+ case R6_OPC_LL:
+ check_insn(ctx, ISA_MIPS32R6);
+ gen_ld(ctx, op1, rt, rs, imm >> 7);
+ break;
case OPC_EXT:
case OPC_INS:
check_insn(ctx, ISA_MIPS32R2);
@@ -15057,6 +15067,19 @@ static void decode_opc (CPUMIPSState *env,
DisasContext *ctx)
break;
}
break;
+ case R6_OPC_SC: /* OPC_DMOD_G_2E */
+ if (ctx->insn_flags & ISA_MIPS32R6) {
+ gen_st_cond(ctx, op1, rt, rs, imm >> 7);
+ } else {
+#if defined(TARGET_MIPS64)
+ check_insn(ctx, INSN_LOONGSON2E);
+ gen_loongson_integer(ctx, op1, rd, rs, rt);
+#else
+ /* Invalid in MIPS32 */
+ generate_exception(ctx, EXCP_RI);
+#endif
+ }
+ break;
#if defined(TARGET_MIPS64)
case OPC_DEXTM ... OPC_DEXT:
case OPC_DINSM ... OPC_DINS:
@@ -15072,7 +15095,8 @@ static void decode_opc (CPUMIPSState *env, DisasContext
*ctx)
break;
case OPC_DDIV_G_2E ... OPC_DDIVU_G_2E:
case OPC_DMULT_G_2E ... OPC_DMULTU_G_2E:
- case OPC_DMOD_G_2E ... OPC_DMODU_G_2E:
+ case OPC_DMODU_G_2E:
+ check_insn_opc_removed(ctx, ISA_MIPS32R6);
check_insn(ctx, INSN_LOONGSON2E);
gen_loongson_integer(ctx, op1, rd, rs, rt);
break;
@@ -15458,10 +15482,10 @@ static void decode_opc (CPUMIPSState *env,
DisasContext *ctx)
break;
case OPC_LWL: /* Load and stores */
case OPC_LWR:
+ case OPC_LL:
check_insn_opc_removed(ctx, ISA_MIPS32R6);
case OPC_LB ... OPC_LH:
case OPC_LW ... OPC_LHU:
- case OPC_LL:
gen_ld(ctx, op, rt, rs, imm);
break;
case OPC_SWL:
@@ -15472,6 +15496,7 @@ static void decode_opc (CPUMIPSState *env, DisasContext
*ctx)
gen_st(ctx, op, rt, rs, imm);
break;
case OPC_SC:
+ check_insn_opc_removed(ctx, ISA_MIPS32R6);
gen_st_cond(ctx, op, rt, rs, imm);
break;
case OPC_CACHE:
--
1.7.5.4
- [Qemu-devel] [PATCH v2 00/22] target-mips: add MIPS64R6 Instruction Set support, Leon Alrae, 2014/06/11
- [Qemu-devel] [PATCH v2 01/22] target-mips: define ISA_MIPS64R6, Leon Alrae, 2014/06/11
- [Qemu-devel] [PATCH v2 02/22] target-mips: signal RI Exception on instructions removed in R6, Leon Alrae, 2014/06/11
- [Qemu-devel] [PATCH v2 03/22] target-mips: add SELEQZ and SELNEZ instructions, Leon Alrae, 2014/06/11
- [Qemu-devel] [PATCH v2 04/22] target-mips: move LL and SC instructions,
Leon Alrae <=
- [Qemu-devel] [PATCH v2 06/22] target-mips: split decode_opc_special* into *_r6 and *_legacy, Leon Alrae, 2014/06/11
- [Qemu-devel] [PATCH v2 07/22] target-mips: signal RI Exception on DSP and Loongson instructions, Leon Alrae, 2014/06/11
- [Qemu-devel] [PATCH v2 08/22] target-mips: move PREF, CACHE, LLD and SCD instructions, Leon Alrae, 2014/06/11
- [Qemu-devel] [PATCH v2 10/22] target-mips: move CLO, DCLO, CLZ, DCLZ, SDBBP and free special2 in R6, Leon Alrae, 2014/06/11
- [Qemu-devel] [PATCH v2 05/22] target-mips: extract decode_opc_special* from decode_opc, Leon Alrae, 2014/06/11
- [Qemu-devel] [PATCH v2 11/22] target-mips: Status.UX/SX/KX enable 32-bit address wrapping, Leon Alrae, 2014/06/11
- [Qemu-devel] [PATCH v2 09/22] target-mips: redefine Integer Multiply and Divide instructions, Leon Alrae, 2014/06/11