[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PULL 070/103] memory: reorganize file-based allocation
From: |
Michael S. Tsirkin |
Subject: |
[Qemu-devel] [PULL 070/103] memory: reorganize file-based allocation |
Date: |
Tue, 17 Jun 2014 20:40:31 +0300 |
From: Paolo Bonzini <address@hidden>
Split the internal interface in exec.c to a separate function, and
push the check on mem_path up to memory_region_init_ram.
Signed-off-by: Paolo Bonzini <address@hidden>
Signed-off-by: Hu Tao <address@hidden>
Acked-by: Michael S. Tsirkin <address@hidden>
---
include/exec/cpu-all.h | 3 --
include/exec/ram_addr.h | 2 +
include/sysemu/sysemu.h | 2 +
exec.c | 105 +++++++++++++++++++++++++++++-------------------
memory.c | 7 +++-
5 files changed, 73 insertions(+), 46 deletions(-)
diff --git a/include/exec/cpu-all.h b/include/exec/cpu-all.h
index ed28f1e..eaddea6 100644
--- a/include/exec/cpu-all.h
+++ b/include/exec/cpu-all.h
@@ -325,9 +325,6 @@ typedef struct RAMList {
} RAMList;
extern RAMList ram_list;
-extern const char *mem_path;
-extern int mem_prealloc;
-
/* Flags stored in the low bits of the TLB virtual address. These are
defined so that fast path ram access is all zeros. */
/* Zero if TLB entry is valid. */
diff --git a/include/exec/ram_addr.h b/include/exec/ram_addr.h
index 2edfa96..dedb258 100644
--- a/include/exec/ram_addr.h
+++ b/include/exec/ram_addr.h
@@ -22,6 +22,8 @@
#ifndef CONFIG_USER_ONLY
#include "hw/xen/xen.h"
+ram_addr_t qemu_ram_alloc_from_file(ram_addr_t size, MemoryRegion *mr,
+ const char *mem_path);
ram_addr_t qemu_ram_alloc_from_ptr(ram_addr_t size, void *host,
MemoryRegion *mr);
ram_addr_t qemu_ram_alloc(ram_addr_t size, MemoryRegion *mr);
diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h
index caf88dd..c4e1bbd 100644
--- a/include/sysemu/sysemu.h
+++ b/include/sysemu/sysemu.h
@@ -133,6 +133,8 @@ extern uint8_t *boot_splash_filedata;
extern size_t boot_splash_filedata_size;
extern uint8_t qemu_extra_params_fw[2];
extern QEMUClockType rtc_clock;
+extern const char *mem_path;
+extern int mem_prealloc;
#define MAX_NODES 128
diff --git a/exec.c b/exec.c
index 4e179a6..525fc04 100644
--- a/exec.c
+++ b/exec.c
@@ -1246,56 +1246,30 @@ static int memory_try_enable_merging(void *addr, size_t
len)
return qemu_madvise(addr, len, QEMU_MADV_MERGEABLE);
}
-ram_addr_t qemu_ram_alloc_from_ptr(ram_addr_t size, void *host,
- MemoryRegion *mr)
+static ram_addr_t ram_block_add(RAMBlock *new_block)
{
- RAMBlock *block, *new_block;
+ RAMBlock *block;
ram_addr_t old_ram_size, new_ram_size;
old_ram_size = last_ram_offset() >> TARGET_PAGE_BITS;
- size = TARGET_PAGE_ALIGN(size);
- new_block = g_malloc0(sizeof(*new_block));
- new_block->fd = -1;
-
/* This assumes the iothread lock is taken here too. */
qemu_mutex_lock_ramlist();
- new_block->mr = mr;
- new_block->offset = find_ram_offset(size);
- if (host) {
- new_block->host = host;
- new_block->flags |= RAM_PREALLOC_MASK;
- } else if (xen_enabled()) {
- if (mem_path) {
- fprintf(stderr, "-mem-path not supported with Xen\n");
- exit(1);
- }
- xen_ram_alloc(new_block->offset, size, mr);
- } else {
- if (mem_path) {
- if (phys_mem_alloc != qemu_anon_ram_alloc) {
- /*
- * file_ram_alloc() needs to allocate just like
- * phys_mem_alloc, but we haven't bothered to provide
- * a hook there.
- */
- fprintf(stderr,
- "-mem-path not supported with this accelerator\n");
- exit(1);
- }
- new_block->host = file_ram_alloc(new_block, size, mem_path);
- }
- if (!new_block->host) {
- new_block->host = phys_mem_alloc(size);
+ new_block->offset = find_ram_offset(new_block->length);
+
+ if (!new_block->host) {
+ if (xen_enabled()) {
+ xen_ram_alloc(new_block->offset, new_block->length, new_block->mr);
+ } else {
+ new_block->host = phys_mem_alloc(new_block->length);
if (!new_block->host) {
fprintf(stderr, "Cannot set up guest memory '%s': %s\n",
new_block->mr->name, strerror(errno));
exit(1);
}
- memory_try_enable_merging(new_block->host, size);
+ memory_try_enable_merging(new_block->host, new_block->length);
}
}
- new_block->length = size;
/* Keep the list sorted from biggest to smallest block. */
QTAILQ_FOREACH(block, &ram_list.blocks, next) {
@@ -1323,18 +1297,65 @@ ram_addr_t qemu_ram_alloc_from_ptr(ram_addr_t size,
void *host,
old_ram_size, new_ram_size);
}
}
- cpu_physical_memory_set_dirty_range(new_block->offset, size);
+ cpu_physical_memory_set_dirty_range(new_block->offset, new_block->length);
- qemu_ram_setup_dump(new_block->host, size);
- qemu_madvise(new_block->host, size, QEMU_MADV_HUGEPAGE);
- qemu_madvise(new_block->host, size, QEMU_MADV_DONTFORK);
+ qemu_ram_setup_dump(new_block->host, new_block->length);
+ qemu_madvise(new_block->host, new_block->length, QEMU_MADV_HUGEPAGE);
+ qemu_madvise(new_block->host, new_block->length, QEMU_MADV_DONTFORK);
- if (kvm_enabled())
- kvm_setup_guest_memory(new_block->host, size);
+ if (kvm_enabled()) {
+ kvm_setup_guest_memory(new_block->host, new_block->length);
+ }
return new_block->offset;
}
+ram_addr_t qemu_ram_alloc_from_file(ram_addr_t size, MemoryRegion *mr,
+ const char *mem_path)
+{
+ RAMBlock *new_block;
+
+ if (xen_enabled()) {
+ fprintf(stderr, "-mem-path not supported with Xen\n");
+ exit(1);
+ }
+
+ if (phys_mem_alloc != qemu_anon_ram_alloc) {
+ /*
+ * file_ram_alloc() needs to allocate just like
+ * phys_mem_alloc, but we haven't bothered to provide
+ * a hook there.
+ */
+ fprintf(stderr,
+ "-mem-path not supported with this accelerator\n");
+ exit(1);
+ }
+
+ size = TARGET_PAGE_ALIGN(size);
+ new_block = g_malloc0(sizeof(*new_block));
+ new_block->mr = mr;
+ new_block->length = size;
+ new_block->host = file_ram_alloc(new_block, size, mem_path);
+ return ram_block_add(new_block);
+}
+
+ram_addr_t qemu_ram_alloc_from_ptr(ram_addr_t size, void *host,
+ MemoryRegion *mr)
+{
+ RAMBlock *new_block;
+
+ size = TARGET_PAGE_ALIGN(size);
+ new_block = g_malloc0(sizeof(*new_block));
+ new_block->mr = mr;
+ new_block->length = size;
+ new_block->fd = -1;
+ new_block->host = host;
+ if (host) {
+ new_block->flags |= RAM_PREALLOC_MASK;
+ }
+ return ram_block_add(new_block);
+}
+
ram_addr_t qemu_ram_alloc(ram_addr_t size, MemoryRegion *mr)
{
return qemu_ram_alloc_from_ptr(size, NULL, mr);
diff --git a/memory.c b/memory.c
index 93afea7..43b90eb 100644
--- a/memory.c
+++ b/memory.c
@@ -23,6 +23,7 @@
#include "exec/memory-internal.h"
#include "exec/ram_addr.h"
+#include "sysemu/sysemu.h"
//#define DEBUG_UNASSIGNED
@@ -1016,7 +1017,11 @@ void memory_region_init_ram(MemoryRegion *mr,
mr->ram = true;
mr->terminates = true;
mr->destructor = memory_region_destructor_ram;
- mr->ram_addr = qemu_ram_alloc(size, mr);
+ if (mem_path) {
+ mr->ram_addr = qemu_ram_alloc_from_file(size, mr, mem_path);
+ } else {
+ mr->ram_addr = qemu_ram_alloc(size, mr);
+ }
}
void memory_region_init_ram_ptr(MemoryRegion *mr,
--
MST
- [Qemu-devel] [PULL 047/103] Add chardev API qemu_chr_fe_get_msgfds, (continued)
- [Qemu-devel] [PULL 047/103] Add chardev API qemu_chr_fe_get_msgfds, Michael S. Tsirkin, 2014/06/17
- [Qemu-devel] [PULL 055/103] Add vhost-user as a vhost backend., Michael S. Tsirkin, 2014/06/17
- [Qemu-devel] [PULL 057/103] Add new vhost-user netdev backend, Michael S. Tsirkin, 2014/06/17
- [Qemu-devel] [PULL 058/103] Add the vhost-user netdev backend to the command line, Michael S. Tsirkin, 2014/06/17
- [Qemu-devel] [PULL 059/103] Add vhost-user protocol documentation, Michael S. Tsirkin, 2014/06/17
- [Qemu-devel] [PULL 061/103] Add qtest for vhost-user, Michael S. Tsirkin, 2014/06/17
- [Qemu-devel] [PULL 065/103] NUMA: convert -numa option to use OptsVisitor, Michael S. Tsirkin, 2014/06/17
- [Qemu-devel] [PULL 066/103] NUMA: expand MAX_NODES from 64 to 128, Michael S. Tsirkin, 2014/06/17
- [Qemu-devel] [PULL 067/103] man: improve -numa doc, Michael S. Tsirkin, 2014/06/17
- [Qemu-devel] [PULL 069/103] numa: introduce memory_region_allocate_system_memory, Michael S. Tsirkin, 2014/06/17
- [Qemu-devel] [PULL 070/103] memory: reorganize file-based allocation,
Michael S. Tsirkin <=
- [Qemu-devel] [PULL 071/103] memory: move preallocation code out of exec.c, Michael S. Tsirkin, 2014/06/17
- [Qemu-devel] [PULL 072/103] memory: move RAM_PREALLOC_MASK to exec.c, rename, Michael S. Tsirkin, 2014/06/17
- [Qemu-devel] [PULL 073/103] configure: add Linux libnuma detection, Michael S. Tsirkin, 2014/06/17
- [Qemu-devel] [PULL 074/103] Introduce signed range., Michael S. Tsirkin, 2014/06/17
- [Qemu-devel] [PULL 075/103] qom: introduce object_property_get_enum and object_property_get_uint16List, Michael S. Tsirkin, 2014/06/17
- [Qemu-devel] [PULL 076/103] numa: add -numa node,memdev= option, Michael S. Tsirkin, 2014/06/17
- [Qemu-devel] [PULL 078/103] memory: add error propagation to file-based RAM allocation, Michael S. Tsirkin, 2014/06/17
- [Qemu-devel] [PULL 079/103] vl: redo -object parsing, Michael S. Tsirkin, 2014/06/17
- [Qemu-devel] [PULL 080/103] pc: pass MachineState to pc_memory_init, Michael S. Tsirkin, 2014/06/17