Re: [Qemu-devel] [PATCH v9 3/4] spapr_pci_vfio: Add spapr-pci-vfio-host-bridge to support vfio

[Alexey Kardashevskiy]

On 06/10/2014 03:39 PM, Alexey Kardashevskiy wrote:
> The patch adds a spapr-pci-vfio-host-bridge device type
> which is a PCI Host Bridge with VFIO support. The new device
> inherits from the spapr-pci-host-bridge device and adds an "iommu"
> property which is an IOMMU id. This ID represents a minimal entity
> for which IOMMU isolation can be guaranteed. In SPAPR architecture IOMMU
> group is called a Partitionable Endpoint (PE).
> 
> Current implementation supports one IOMMU id per QEMU VFIO PHB. Since
> SPAPR allows multiple PHB for no extra cost, this does not seem to
> be a problem. This limitation may change in the future though.
> 
> Example of use:
> Configure and Add 3 functions of a multifunctional device to QEMU:
> (the NEC PCI USB card is used as an example here):
> -device spapr-pci-vfio-host-bridge,id=USB,iommu=4,index=7 \
> -device vfio-pci,host=4:0:1.0,addr=1.0,bus=USB,multifunction=true
> -device vfio-pci,host=4:0:1.1,addr=1.1,bus=USB
> -device vfio-pci,host=4:0:1.2,addr=1.2,bus=USB
> 
> where:
> * index=7 is a QEMU PHB index (used as source for MMIO/MSI/IO windows
> offset);
> * iommu=4 is an IOMMU id which can be found in sysfs:
> address@hidden ~]$ cd /sys/bus/pci/devices/0004:00:00.0/
> address@hidden 0004:00:00.0]$ ls -l iommu_group
> lrwxrwxrwx 1 root root 0 Jun  5 12:49 iommu_group -> 
> ../../../kernel/iommu_groups/4
> 
> Signed-off-by: Alexey Kardashevskiy <address@hidden>


Alexander (Graf), ping? :)


> ---
> Changes:
> v8:
> * s/vfio_container_spapr_get_info/vfio_container_ioctl/
> * spapr_tce_new_table() now receives vfio_accel=true instead of
> kvm_accel=false
> 
> v7:
> * remove bunch of properties from VFIO PHB such as "scan", "multifunction",
> "force_addr" - let management softwsare deal with it
> * removed traces used in scan() (which is also removed)
> * updated license
> * disables in-kernel TCE table ("false" in spapr_tce_new_table())
> 
> v5:
> * added handling of possible failure of spapr_vfio_new_table()
> 
> v4:
> * moved IOMMU changes to separate patches
> * moved spapr-pci-vfio-host-bridge to new file
> ---
>  hw/ppc/Makefile.objs        |   3 ++
>  hw/ppc/spapr_pci_vfio.c     | 102 
> ++++++++++++++++++++++++++++++++++++++++++++
>  include/hw/pci-host/spapr.h |  11 +++++
>  3 files changed, 116 insertions(+)
>  create mode 100644 hw/ppc/spapr_pci_vfio.c
> 
> diff --git a/hw/ppc/Makefile.objs b/hw/ppc/Makefile.objs
> index ea747f0..edd44d0 100644
> --- a/hw/ppc/Makefile.objs
> +++ b/hw/ppc/Makefile.objs
> @@ -4,6 +4,9 @@ obj-y += ppc.o ppc_booke.o
>  obj-$(CONFIG_PSERIES) += spapr.o spapr_vio.o spapr_events.o
>  obj-$(CONFIG_PSERIES) += spapr_hcall.o spapr_iommu.o spapr_rtas.o
>  obj-$(CONFIG_PSERIES) += spapr_pci.o
> +ifeq ($(CONFIG_PCI)$(CONFIG_PSERIES)$(CONFIG_LINUX), yyy)
> +obj-y += spapr_pci_vfio.o
> +endif
>  # PowerPC 4xx boards
>  obj-y += ppc405_boards.o ppc4xx_devs.o ppc405_uc.o ppc440_bamboo.o
>  obj-y += ppc4xx_pci.o
> diff --git a/hw/ppc/spapr_pci_vfio.c b/hw/ppc/spapr_pci_vfio.c
> new file mode 100644
> index 0000000..d3bddf2
> --- /dev/null
> +++ b/hw/ppc/spapr_pci_vfio.c
> @@ -0,0 +1,102 @@
> +/*
> + * QEMU sPAPR PCI host for VFIO
> + *
> + * Copyright (c) 2011-2014 Alexey Kardashevskiy, IBM Corporation.
> + *
> + *  This program is free software; you can redistribute it and/or modify
> + *  it under the terms of the GNU General Public License as published by
> + *  the Free Software Foundation; either version 2 of the License,
> + *  or (at your option) any later version.
> + *
> + *  This program is distributed in the hope that it will be useful,
> + *  but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *  GNU General Public License for more details.
> + *
> + *  You should have received a copy of the GNU General Public License
> + *  along with this program; if not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include "hw/ppc/spapr.h"
> +#include "hw/pci-host/spapr.h"
> +#include "linux/vfio.h"
> +#include "hw/misc/vfio.h"
> +
> +static Property spapr_phb_vfio_properties[] = {
> +    DEFINE_PROP_INT32("iommu", sPAPRPHBVFIOState, iommugroupid, -1),
> +    DEFINE_PROP_END_OF_LIST(),
> +};
> +
> +static void spapr_phb_vfio_finish_realize(sPAPRPHBState *sphb, Error **errp)
> +{
> +    sPAPRPHBVFIOState *svphb = SPAPR_PCI_VFIO_HOST_BRIDGE(sphb);
> +    struct vfio_iommu_spapr_tce_info info = { .argsz = sizeof(info) };
> +    int ret;
> +    sPAPRTCETable *tcet;
> +    uint32_t liobn = svphb->phb.dma_liobn;
> +
> +    if (svphb->iommugroupid == -1) {
> +        error_setg(errp, "Wrong IOMMU group ID %d", svphb->iommugroupid);
> +        return;
> +    }
> +
> +    ret = vfio_container_ioctl(&svphb->phb.iommu_as, svphb->iommugroupid,
> +                               VFIO_CHECK_EXTENSION,
> +                               (void *) VFIO_SPAPR_TCE_IOMMU);
> +    if (ret != 1) {
> +        error_setg_errno(errp, -ret,
> +                         "spapr-vfio: SPAPR extension is not supported");
> +        return;
> +    }
> +
> +    ret = vfio_container_ioctl(&svphb->phb.iommu_as, svphb->iommugroupid,
> +                               VFIO_IOMMU_SPAPR_TCE_GET_INFO, &info);
> +    if (ret) {
> +        error_setg_errno(errp, -ret,
> +                         "spapr-vfio: get info from container failed");
> +        return;
> +    }
> +
> +    tcet = spapr_tce_new_table(DEVICE(sphb), liobn, info.dma32_window_start,
> +                               SPAPR_TCE_PAGE_SHIFT,
> +                               info.dma32_window_size >> 
> SPAPR_TCE_PAGE_SHIFT,
> +                               true);
> +    if (!tcet) {
> +        error_setg(errp, "spapr-vfio: failed to create VFIO TCE table");
> +        return;
> +    }
> +
> +    /* Register default 32bit DMA window */
> +    memory_region_add_subregion(&sphb->iommu_root, tcet->bus_offset,
> +                                spapr_tce_get_iommu(tcet));
> +}
> +
> +static void spapr_phb_vfio_reset(DeviceState *qdev)
> +{
> +    /* Do nothing */
> +}
> +
> +static void spapr_phb_vfio_class_init(ObjectClass *klass, void *data)
> +{
> +    DeviceClass *dc = DEVICE_CLASS(klass);
> +    sPAPRPHBClass *spc = SPAPR_PCI_HOST_BRIDGE_CLASS(klass);
> +
> +    dc->props = spapr_phb_vfio_properties;
> +    dc->reset = spapr_phb_vfio_reset;
> +    spc->finish_realize = spapr_phb_vfio_finish_realize;
> +}
> +
> +static const TypeInfo spapr_phb_vfio_info = {
> +    .name          = TYPE_SPAPR_PCI_VFIO_HOST_BRIDGE,
> +    .parent        = TYPE_SPAPR_PCI_HOST_BRIDGE,
> +    .instance_size = sizeof(sPAPRPHBVFIOState),
> +    .class_init    = spapr_phb_vfio_class_init,
> +    .class_size    = sizeof(sPAPRPHBClass),
> +};
> +
> +static void spapr_pci_vfio_register_types(void)
> +{
> +    type_register_static(&spapr_phb_vfio_info);
> +}
> +
> +type_init(spapr_pci_vfio_register_types)
> diff --git a/include/hw/pci-host/spapr.h b/include/hw/pci-host/spapr.h
> index 0934518..6808e96 100644
> --- a/include/hw/pci-host/spapr.h
> +++ b/include/hw/pci-host/spapr.h
> @@ -30,10 +30,14 @@
>  #define SPAPR_MSIX_MAX_DEVS 32
>  
>  #define TYPE_SPAPR_PCI_HOST_BRIDGE "spapr-pci-host-bridge"
> +#define TYPE_SPAPR_PCI_VFIO_HOST_BRIDGE "spapr-pci-vfio-host-bridge"
>  
>  #define SPAPR_PCI_HOST_BRIDGE(obj) \
>      OBJECT_CHECK(sPAPRPHBState, (obj), TYPE_SPAPR_PCI_HOST_BRIDGE)
>  
> +#define SPAPR_PCI_VFIO_HOST_BRIDGE(obj) \
> +    OBJECT_CHECK(sPAPRPHBVFIOState, (obj), TYPE_SPAPR_PCI_VFIO_HOST_BRIDGE)
> +
>  #define SPAPR_PCI_HOST_BRIDGE_CLASS(klass) \
>       OBJECT_CLASS_CHECK(sPAPRPHBClass, (klass), TYPE_SPAPR_PCI_HOST_BRIDGE)
>  #define SPAPR_PCI_HOST_BRIDGE_GET_CLASS(obj) \
> @@ -41,6 +45,7 @@
>  
>  typedef struct sPAPRPHBClass sPAPRPHBClass;
>  typedef struct sPAPRPHBState sPAPRPHBState;
> +typedef struct sPAPRPHBVFIOState sPAPRPHBVFIOState;
>  
>  struct sPAPRPHBClass {
>      PCIHostBridgeClass parent_class;
> @@ -76,6 +81,12 @@ struct sPAPRPHBState {
>      QLIST_ENTRY(sPAPRPHBState) list;
>  };
>  
> +struct sPAPRPHBVFIOState {
> +    sPAPRPHBState phb;
> +
> +    int32_t iommugroupid;
> +};
> +
>  #define SPAPR_PCI_BASE_BUID          0x800000020000000ULL
>  
>  #define SPAPR_PCI_WINDOW_BASE        0x10000000000ULL
> 


-- 
Alexey