[Qemu-devel] [PULL 27/43] qapi event: convert BLOCK_IO_ERROR and BLOCK_JOB_ERROR

[Luiz Capitulino]

From: Wenchao Xia <address@hidden>

Signed-off-by: Wenchao Xia <address@hidden>
Signed-off-by: Paolo Bonzini <address@hidden>
Reviewed-by: Eric Blake <address@hidden>
Signed-off-by: Luiz Capitulino <address@hidden>
---
 block.c                   | 41 ++++++++---------------------------------
 blockjob.c                |  6 +++++-
 docs/qmp/qmp-events.txt   | 47 -----------------------------------------------
 include/block/block_int.h |  3 ---
 qapi-schema.json          | 14 ++++++++++++++
 qapi/block-core.json      | 39 +++++++++++++++++++++++++++++++++++++++
 6 files changed, 66 insertions(+), 84 deletions(-)

diff --git a/block.c b/block.c
index 288efbc..e6f9b71 100644
--- a/block.c
+++ b/block.c
@@ -24,7 +24,6 @@
 #include "config-host.h"
 #include "qemu-common.h"
 #include "trace.h"
-#include "monitor/monitor.h"
 #include "block/block_int.h"
 #include "block/blockjob.h"
 #include "qemu/module.h"
@@ -2133,36 +2132,6 @@ void bdrv_set_dev_ops(BlockDriverState *bs, const 
BlockDevOps *ops,
     bs->dev_opaque = opaque;
 }
 
-void bdrv_emit_qmp_error_event(const BlockDriverState *bdrv,
-                               enum MonitorEvent ev,
-                               BlockErrorAction action, bool is_read)
-{
-    QObject *data;
-    const char *action_str;
-
-    switch (action) {
-    case BLOCK_ERROR_ACTION_REPORT:
-        action_str = "report";
-        break;
-    case BLOCK_ERROR_ACTION_IGNORE:
-        action_str = "ignore";
-        break;
-    case BLOCK_ERROR_ACTION_STOP:
-        action_str = "stop";
-        break;
-    default:
-        abort();
-    }
-
-    data = qobject_from_jsonf("{ 'device': %s, 'action': %s, 'operation': %s 
}",
-                              bdrv->device_name,
-                              action_str,
-                              is_read ? "read" : "write");
-    monitor_protocol_event(ev, data);
-
-    qobject_decref(data);
-}
-
 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load)
 {
     if (bs->dev_ops && bs->dev_ops->change_media_cb) {
@@ -3636,10 +3605,16 @@ void bdrv_error_action(BlockDriverState *bs, 
BlockErrorAction action,
          * also ensures that the STOP/RESUME pair of events is emitted.
          */
         qemu_system_vmstop_request_prepare();
-        bdrv_emit_qmp_error_event(bs, QEVENT_BLOCK_IO_ERROR, action, is_read);
+        qapi_event_send_block_io_error(bdrv_get_device_name(bs),
+                                       is_read ? IO_OPERATION_TYPE_READ :
+                                       IO_OPERATION_TYPE_WRITE,
+                                       action, &error_abort);
         qemu_system_vmstop_request(RUN_STATE_IO_ERROR);
     } else {
-        bdrv_emit_qmp_error_event(bs, QEVENT_BLOCK_IO_ERROR, action, is_read);
+        qapi_event_send_block_io_error(bdrv_get_device_name(bs),
+                                       is_read ? IO_OPERATION_TYPE_READ :
+                                       IO_OPERATION_TYPE_WRITE,
+                                       action, &error_abort);
     }
 }
 
diff --git a/blockjob.c b/blockjob.c
index bc63d42..ee2a6fb 100644
--- a/blockjob.c
+++ b/blockjob.c
@@ -34,6 +34,7 @@
 #include "block/coroutine.h"
 #include "qmp-commands.h"
 #include "qemu/timer.h"
+#include "qapi-event.h"
 
 void *block_job_create(const BlockJobDriver *driver, BlockDriverState *bs,
                        int64_t speed, BlockDriverCompletionFunc *cb,
@@ -277,7 +278,10 @@ BlockErrorAction block_job_error_action(BlockJob *job, 
BlockDriverState *bs,
     default:
         abort();
     }
-    bdrv_emit_qmp_error_event(job->bs, QEVENT_BLOCK_JOB_ERROR, action, 
is_read);
+    qapi_event_send_block_job_error(bdrv_get_device_name(bs),
+                                    is_read ? IO_OPERATION_TYPE_READ :
+                                    IO_OPERATION_TYPE_WRITE,
+                                    action, &error_abort);
     if (action == BLOCK_ERROR_ACTION_STOP) {
         block_job_pause(job);
         block_job_iostatus_set_err(job, error);
diff --git a/docs/qmp/qmp-events.txt b/docs/qmp/qmp-events.txt
index d97b389..56bd145 100644
--- a/docs/qmp/qmp-events.txt
+++ b/docs/qmp/qmp-events.txt
@@ -50,31 +50,6 @@ Example:
         "size": 65536 },
     "timestamp": { "seconds": 1378126126, "microseconds": 966463 } }
 
-BLOCK_IO_ERROR
---------------
-
-Emitted when a disk I/O error occurs.
-
-Data:
-
-- "device": device name (json-string)
-- "operation": I/O operation (json-string, "read" or "write")
-- "action": action that has been taken, it's one of the following 
(json-string):
-    "ignore": error has been ignored
-    "report": error has been reported to the device
-    "stop": the VM is going to stop because of the error
-
-Example:
-
-{ "event": "BLOCK_IO_ERROR",
-    "data": { "device": "ide0-hd1",
-              "operation": "write",
-              "action": "stop" },
-    "timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
-
-Note: If action is "stop", a STOP event will eventually follow the
-BLOCK_IO_ERROR event.
-
 BLOCK_JOB_CANCELLED
 -------------------
 
@@ -128,28 +103,6 @@ Example:
                "speed": 0 },
      "timestamp": { "seconds": 1267061043, "microseconds": 959568 } }
 
-BLOCK_JOB_ERROR
----------------
-
-Emitted when a block job encounters an error.
-
-Data:
-
-- "device": device name (json-string)
-- "operation": I/O operation (json-string, "read" or "write")
-- "action": action that has been taken, it's one of the following 
(json-string):
-    "ignore": error has been ignored, the job may fail later
-    "report": error will be reported and the job canceled
-    "stop": error caused job to be paused
-
-Example:
-
-{ "event": "BLOCK_JOB_ERROR",
-    "data": { "device": "ide0-hd1",
-              "operation": "write",
-              "action": "stop" },
-    "timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
-
 BLOCK_JOB_READY
 ---------------
 
diff --git a/include/block/block_int.h b/include/block/block_int.h
index 7aa2213..715c761 100644
--- a/include/block/block_int.h
+++ b/include/block/block_int.h
@@ -425,9 +425,6 @@ void bdrv_attach_aio_context(BlockDriverState *bs,
 #ifdef _WIN32
 int is_windows_drive(const char *filename);
 #endif
-void bdrv_emit_qmp_error_event(const BlockDriverState *bdrv,
-                               enum MonitorEvent ev,
-                               BlockErrorAction action, bool is_read);
 
 /**
  * stream_start:
diff --git a/qapi-schema.json b/qapi-schema.json
index 0bf5894..a8de08c 100644
--- a/qapi-schema.json
+++ b/qapi-schema.json
@@ -3371,4 +3371,18 @@
 { 'enum': 'WatchdogExpirationAction',
   'data': [ 'reset', 'shutdown', 'poweroff', 'pause', 'debug', 'none' ] }
 
+##
+# @IoOperationType
+#
+# An enumeration of the I/O operation types
+#
+# @read: read operation
+#
+# @write: write operation
+#
+# Since: 2.1
+##
+{ 'enum': 'IoOperationType',
+  'data': [ 'read', 'write' ] }
+
 { 'include': 'qapi-event.json' }
diff --git a/qapi/block-core.json b/qapi/block-core.json
index b7f36c6..682864d 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -1426,3 +1426,42 @@
 ##
 { 'enum': 'BlockErrorAction',
   'data': [ 'ignore', 'report', 'stop' ] }
+
+
+##
+# @BLOCK_IO_ERROR
+#
+# Emitted when a disk I/O error occurs
+#
+# @device: device name
+#
+# @operation: I/O operation
+#
+# @action: action that has been taken
+#
+# Note: If action is "stop", a STOP event will eventually follow the
+# BLOCK_IO_ERROR event
+#
+# Since: 0.13.0
+##
+{ 'event': 'BLOCK_IO_ERROR',
+  'data': { 'device': 'str', 'operation': 'IoOperationType',
+            'action': 'BlockErrorAction' } }
+
+##
+# @BLOCK_JOB_ERROR
+#
+# Emitted when a block job encounters an error
+#
+# @device: device name
+#
+# @operation: I/O operation
+#
+# @action: action that has been taken
+#
+# Since: 1.3
+##
+{ 'event': 'BLOCK_JOB_ERROR',
+  'data': { 'device'   : 'str',
+            'operation': 'IoOperationType',
+            'action'   : 'BlockdevOnError' } }
-- 
1.9.3