[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PULL 24/32] xics: Add flags for interrupts
From: |
Alexander Graf |
Subject: |
[Qemu-devel] [PULL 24/32] xics: Add flags for interrupts |
Date: |
Fri, 27 Jun 2014 13:52:16 +0200 |
From: Alexey Kardashevskiy <address@hidden>
The existing interrupt allocation scheme in SPAPR assumes that
interrupts are allocated at the start time, continously and the config
will not change. However, there are cases when this is not going to work
such as:
1. migration - we will have to have an ability to choose interrupt
numbers for devices in the command line and this will create gaps in
interrupt space.
2. PCI hotplug - interrupts from unplugged device need to be returned
back to interrupt pool, otherwise we will quickly run out of interrupts.
This replaces a separate lslsi[] array with a byte in the ICSIRQState
struct and defines "LSI" and "MSI" flags. Neither of these flags set
signals that the descriptor is not allocated and not in use.
Signed-off-by: Alexey Kardashevskiy <address@hidden>
Signed-off-by: Alexander Graf <address@hidden>
---
hw/intc/xics.c | 26 ++++++++++++++++++--------
hw/intc/xics_kvm.c | 5 ++---
include/hw/ppc/xics.h | 6 +++++-
3 files changed, 25 insertions(+), 12 deletions(-)
diff --git a/hw/intc/xics.c b/hw/intc/xics.c
index 493a2a4..5220d4f 100644
--- a/hw/intc/xics.c
+++ b/hw/intc/xics.c
@@ -437,7 +437,7 @@ static void ics_set_irq(void *opaque, int srcno, int val)
{
ICSState *ics = (ICSState *)opaque;
- if (ics->islsi[srcno]) {
+ if (ics->irqs[srcno].flags & XICS_FLAGS_IRQ_LSI) {
set_irq_lsi(ics, srcno, val);
} else {
set_irq_msi(ics, srcno, val);
@@ -474,7 +474,7 @@ static void ics_write_xive(ICSState *ics, int nr, int
server,
trace_xics_ics_write_xive(nr, srcno, server, priority);
- if (ics->islsi[srcno]) {
+ if (ics->irqs[srcno].flags & XICS_FLAGS_IRQ_LSI) {
write_xive_lsi(ics, srcno);
} else {
write_xive_msi(ics, srcno);
@@ -496,7 +496,7 @@ static void ics_resend(ICSState *ics)
for (i = 0; i < ics->nr_irqs; i++) {
/* FIXME: filter by server#? */
- if (ics->islsi[i]) {
+ if (ics->irqs[i].flags & XICS_FLAGS_IRQ_LSI) {
resend_lsi(ics, i);
} else {
resend_msi(ics, i);
@@ -511,7 +511,7 @@ static void ics_eoi(ICSState *ics, int nr)
trace_xics_ics_eoi(nr);
- if (ics->islsi[srcno]) {
+ if (ics->irqs[srcno].flags & XICS_FLAGS_IRQ_LSI) {
irq->status &= ~XICS_STATUS_SENT;
}
}
@@ -563,13 +563,14 @@ static int ics_dispatch_post_load(void *opaque, int
version_id)
static const VMStateDescription vmstate_ics_irq = {
.name = "ics/irq",
- .version_id = 1,
+ .version_id = 2,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_UINT32(server, ICSIRQState),
VMSTATE_UINT8(priority, ICSIRQState),
VMSTATE_UINT8(saved_priority, ICSIRQState),
VMSTATE_UINT8(status, ICSIRQState),
+ VMSTATE_UINT8(flags, ICSIRQState),
VMSTATE_END_OF_LIST()
},
};
@@ -606,7 +607,6 @@ static void ics_realize(DeviceState *dev, Error **errp)
return;
}
ics->irqs = g_malloc0(ics->nr_irqs * sizeof(ICSIRQState));
- ics->islsi = g_malloc0(ics->nr_irqs * sizeof(bool));
ics->qirqs = qemu_allocate_irqs(ics_set_irq, ics, ics->nr_irqs);
}
@@ -643,11 +643,21 @@ qemu_irq xics_get_qirq(XICSState *icp, int irq)
return icp->ics->qirqs[irq - icp->ics->offset];
}
+static void ics_set_irq_type(ICSState *ics, int srcno, bool lsi)
+{
+ assert(!(ics->irqs[srcno].flags & XICS_FLAGS_IRQ_MASK));
+
+ ics->irqs[srcno].flags |=
+ lsi ? XICS_FLAGS_IRQ_LSI : XICS_FLAGS_IRQ_MSI;
+}
+
void xics_set_irq_type(XICSState *icp, int irq, bool lsi)
{
- assert(ics_valid_irq(icp->ics, irq));
+ ICSState *ics = icp->ics;
+
+ assert(ics_valid_irq(ics, irq));
- icp->ics->islsi[irq - icp->ics->offset] = lsi;
+ ics_set_irq_type(ics, irq - ics->offset, lsi);
}
/*
diff --git a/hw/intc/xics_kvm.c b/hw/intc/xics_kvm.c
index 4704c98..5461454 100644
--- a/hw/intc/xics_kvm.c
+++ b/hw/intc/xics_kvm.c
@@ -220,7 +220,7 @@ static int ics_set_kvm_state(ICSState *ics, int version_id)
state |= KVM_XICS_MASKED;
}
- if (ics->islsi[i]) {
+ if (ics->irqs[i].flags & XICS_FLAGS_IRQ_LSI) {
state |= KVM_XICS_LEVEL_SENSITIVE;
if (irq->status & XICS_STATUS_ASSERTED) {
state |= KVM_XICS_PENDING;
@@ -249,7 +249,7 @@ static void ics_kvm_set_irq(void *opaque, int srcno, int
val)
int rc;
args.irq = srcno + ics->offset;
- if (!ics->islsi[srcno]) {
+ if (ics->irqs[srcno].flags & XICS_FLAGS_IRQ_MSI) {
if (!val) {
return;
}
@@ -286,7 +286,6 @@ static void ics_kvm_realize(DeviceState *dev, Error **errp)
return;
}
ics->irqs = g_malloc0(ics->nr_irqs * sizeof(ICSIRQState));
- ics->islsi = g_malloc0(ics->nr_irqs * sizeof(bool));
ics->qirqs = qemu_allocate_irqs(ics_kvm_set_irq, ics, ics->nr_irqs);
}
diff --git a/include/hw/ppc/xics.h b/include/hw/ppc/xics.h
index 85e4c8a..2891599 100644
--- a/include/hw/ppc/xics.h
+++ b/include/hw/ppc/xics.h
@@ -136,7 +136,6 @@ struct ICSState {
uint32_t nr_irqs;
uint32_t offset;
qemu_irq *qirqs;
- bool *islsi;
ICSIRQState *irqs;
XICSState *icp;
};
@@ -150,6 +149,11 @@ struct ICSIRQState {
#define XICS_STATUS_REJECTED 0x4
#define XICS_STATUS_MASKED_PENDING 0x8
uint8_t status;
+/* (flags & XICS_FLAGS_IRQ_MASK) == 0 means the interrupt is not allocated */
+#define XICS_FLAGS_IRQ_LSI 0x1
+#define XICS_FLAGS_IRQ_MSI 0x2
+#define XICS_FLAGS_IRQ_MASK 0x3
+ uint8_t flags;
};
#define XICS_IRQS 1024
--
1.8.1.4
- [Qemu-devel] [PULL 08/32] spapr: Fix RTAS token numbers, (continued)
- [Qemu-devel] [PULL 08/32] spapr: Fix RTAS token numbers, Alexander Graf, 2014/06/27
- [Qemu-devel] [PULL 07/32] PPC: Add support for Apple gdb in gdbstub, Alexander Graf, 2014/06/27
- [Qemu-devel] [PULL 15/32] mac99: Add motherboard devices before PCI cards, Alexander Graf, 2014/06/27
- [Qemu-devel] [PULL 22/32] spapr: Add RTAS sysparm UUID, Alexander Graf, 2014/06/27
- [Qemu-devel] [PULL 19/32] spapr: Define a 2.1 pseries machine, Alexander Graf, 2014/06/27
- [Qemu-devel] [PULL 10/32] vfio: Add vfio_container_ioctl(), Alexander Graf, 2014/06/27
- [Qemu-devel] [PULL 25/32] xics: Add xics_find_source(), Alexander Graf, 2014/06/27
- [Qemu-devel] [PULL 29/32] xics: Implement xics_ics_free(), Alexander Graf, 2014/06/27
- [Qemu-devel] [PULL 32/32] PPC: e500: Only create dt entries for existing serial ports, Alexander Graf, 2014/06/27
- [Qemu-devel] [PULL 21/32] spapr: Fix RTAS sysparm DIAGNOSTICS_RUN_MODE, Alexander Graf, 2014/06/27
- [Qemu-devel] [PULL 24/32] xics: Add flags for interrupts,
Alexander Graf <=
- [Qemu-devel] [PULL 26/32] xics: Disable flags reset on xics reset, Alexander Graf, 2014/06/27
- [Qemu-devel] [PULL 16/32] uninorth: Fix PCI hole size, Alexander Graf, 2014/06/27
- [Qemu-devel] [PULL 06/32] target-ppc: fixed translation of mcrxr instruction, Alexander Graf, 2014/06/27
- [Qemu-devel] [PULL 31/32] spapr_pci: Use XICS interrupt allocator and do not cache interrupts in PHB, Alexander Graf, 2014/06/27
- [Qemu-devel] [PULL 28/32] spapr: Remove @next_irq, Alexander Graf, 2014/06/27
- [Qemu-devel] [PULL 20/32] spapr: Add rtas_st_buffer utility function, Alexander Graf, 2014/06/27
- [Qemu-devel] [PULL 27/32] spapr: Move interrupt allocator to xics, Alexander Graf, 2014/06/27
- [Qemu-devel] [PULL 30/32] vmstate: Add preallocation for migrating arrays (VMS_ALLOC flag), Alexander Graf, 2014/06/27
- [Qemu-devel] [PULL 23/32] spapr: Add RTAS sysparm SPLPAR Characteristics, Alexander Graf, 2014/06/27
- Re: [Qemu-devel] [PULL 00/32] ppc patch queue 2014-06-27, Peter Maydell, 2014/06/29