[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PULL 29/37] virtio-net: use virtio wrappers to access head
From: |
Michael S. Tsirkin |
Subject: |
[Qemu-devel] [PULL 29/37] virtio-net: use virtio wrappers to access headers |
Date: |
Sun, 29 Jun 2014 19:59:46 +0300 |
From: Rusty Russell <address@hidden>
Signed-off-by: Rusty Russell <address@hidden>
Reviewed-by: Anthony Liguori <address@hidden>
[ pass VirtIODevice * to memory accessors,
converted new tswap locations to virtio_tswap,
Greg Kurz <address@hidden> ]
Signed-off-by: Greg Kurz <address@hidden>
Reviewed-by: Michael S. Tsirkin <address@hidden>
Signed-off-by: Michael S. Tsirkin <address@hidden>
---
hw/net/virtio-net.c | 31 +++++++++++++++++--------------
1 file changed, 17 insertions(+), 14 deletions(-)
diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c
index eead70e..268eff9 100644
--- a/hw/net/virtio-net.c
+++ b/hw/net/virtio-net.c
@@ -23,6 +23,7 @@
#include "hw/virtio/virtio-bus.h"
#include "qapi/qmp/qjson.h"
#include "qapi-event.h"
+#include "hw/virtio/virtio-access.h"
#define VIRTIO_NET_VM_VERSION 11
@@ -72,8 +73,8 @@ static void virtio_net_get_config(VirtIODevice *vdev, uint8_t
*config)
VirtIONet *n = VIRTIO_NET(vdev);
struct virtio_net_config netcfg;
- stw_p(&netcfg.status, n->status);
- stw_p(&netcfg.max_virtqueue_pairs, n->max_queues);
+ virtio_stw_p(vdev, &netcfg.status, n->status);
+ virtio_stw_p(vdev, &netcfg.max_virtqueue_pairs, n->max_queues);
memcpy(netcfg.mac, n->mac, ETH_ALEN);
memcpy(config, &netcfg, n->config_size);
}
@@ -604,6 +605,7 @@ static int virtio_net_handle_offloads(VirtIONet *n, uint8_t
cmd,
static int virtio_net_handle_mac(VirtIONet *n, uint8_t cmd,
struct iovec *iov, unsigned int iov_cnt)
{
+ VirtIODevice *vdev = VIRTIO_DEVICE(n);
struct virtio_net_ctrl_mac mac_data;
size_t s;
NetClientState *nc = qemu_get_queue(n->nic);
@@ -632,7 +634,7 @@ static int virtio_net_handle_mac(VirtIONet *n, uint8_t cmd,
s = iov_to_buf(iov, iov_cnt, 0, &mac_data.entries,
sizeof(mac_data.entries));
- mac_data.entries = ldl_p(&mac_data.entries);
+ mac_data.entries = virtio_ldl_p(vdev, &mac_data.entries);
if (s != sizeof(mac_data.entries)) {
goto error;
}
@@ -659,7 +661,7 @@ static int virtio_net_handle_mac(VirtIONet *n, uint8_t cmd,
s = iov_to_buf(iov, iov_cnt, 0, &mac_data.entries,
sizeof(mac_data.entries));
- mac_data.entries = ldl_p(&mac_data.entries);
+ mac_data.entries = virtio_ldl_p(vdev, &mac_data.entries);
if (s != sizeof(mac_data.entries)) {
goto error;
}
@@ -699,12 +701,13 @@ error:
static int virtio_net_handle_vlan_table(VirtIONet *n, uint8_t cmd,
struct iovec *iov, unsigned int
iov_cnt)
{
+ VirtIODevice *vdev = VIRTIO_DEVICE(n);
uint16_t vid;
size_t s;
NetClientState *nc = qemu_get_queue(n->nic);
s = iov_to_buf(iov, iov_cnt, 0, &vid, sizeof(vid));
- vid = lduw_p(&vid);
+ vid = virtio_lduw_p(vdev, &vid);
if (s != sizeof(vid)) {
return VIRTIO_NET_ERR;
}
@@ -758,7 +761,7 @@ static int virtio_net_handle_mq(VirtIONet *n, uint8_t cmd,
return VIRTIO_NET_ERR;
}
- queues = lduw_p(&mq.virtqueue_pairs);
+ queues = virtio_lduw_p(vdev, &mq.virtqueue_pairs);
if (queues < VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MIN ||
queues > VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX ||
@@ -875,12 +878,12 @@ static int virtio_net_has_buffers(VirtIONetQueue *q, int
bufsize)
return 1;
}
-static void virtio_net_hdr_swap(struct virtio_net_hdr *hdr)
+static void virtio_net_hdr_swap(VirtIODevice *vdev, struct virtio_net_hdr *hdr)
{
- tswap16s(&hdr->hdr_len);
- tswap16s(&hdr->gso_size);
- tswap16s(&hdr->csum_start);
- tswap16s(&hdr->csum_offset);
+ virtio_tswap16s(vdev, &hdr->hdr_len);
+ virtio_tswap16s(vdev, &hdr->gso_size);
+ virtio_tswap16s(vdev, &hdr->csum_start);
+ virtio_tswap16s(vdev, &hdr->csum_offset);
}
/* dhclient uses AF_PACKET but doesn't pass auxdata to the kernel so
@@ -918,7 +921,7 @@ static void receive_header(VirtIONet *n, const struct iovec
*iov, int iov_cnt,
void *wbuf = (void *)buf;
work_around_broken_dhclient(wbuf, wbuf + n->host_hdr_len,
size - n->host_hdr_len);
- virtio_net_hdr_swap(wbuf);
+ virtio_net_hdr_swap(VIRTIO_DEVICE(n), wbuf);
iov_from_buf(iov, iov_cnt, 0, buf, sizeof(struct virtio_net_hdr));
} else {
struct virtio_net_hdr hdr = {
@@ -1068,7 +1071,7 @@ static ssize_t virtio_net_receive(NetClientState *nc,
const uint8_t *buf, size_t
}
if (mhdr_cnt) {
- stw_p(&mhdr.num_buffers, i);
+ virtio_stw_p(vdev, &mhdr.num_buffers, i);
iov_from_buf(mhdr_sg, mhdr_cnt,
0,
&mhdr.num_buffers, sizeof mhdr.num_buffers);
@@ -1132,7 +1135,7 @@ static int32_t virtio_net_flush_tx(VirtIONetQueue *q)
error_report("virtio-net header incorrect");
exit(1);
}
- virtio_net_hdr_swap((void *) out_sg[0].iov_base);
+ virtio_net_hdr_swap(vdev, (void *) out_sg[0].iov_base);
}
/*
--
MST
- [Qemu-devel] [PULL 19/37] virtio-blk: implement per-device migration calls, (continued)
- [Qemu-devel] [PULL 19/37] virtio-blk: implement per-device migration calls, Michael S. Tsirkin, 2014/06/29
- [Qemu-devel] [PULL 20/37] virtio-serial: implement per-device migration calls, Michael S. Tsirkin, 2014/06/29
- [Qemu-devel] [PULL 21/37] virtio-balloon: implement per-device migration calls, Michael S. Tsirkin, 2014/06/29
- [Qemu-devel] [PULL 22/37] virtio-rng: implement per-device migration calls, Michael S. Tsirkin, 2014/06/29
- [Qemu-devel] [PULL 23/37] virtio: add subsections to the migration stream, Michael S. Tsirkin, 2014/06/29
- [Qemu-devel] [PULL 24/37] exec: introduce target_words_bigendian() helper, Michael S. Tsirkin, 2014/06/29
- [Qemu-devel] [PULL 25/37] cpu: introduce CPUClass::virtio_is_big_endian(), Michael S. Tsirkin, 2014/06/29
- [Qemu-devel] [PULL 26/37] virtio: add endian-ambivalent support to VirtIODevice, Michael S. Tsirkin, 2014/06/29
- [Qemu-devel] [PULL 27/37] virtio: memory accessors for endian-ambivalent targets, Michael S. Tsirkin, 2014/06/29
- [Qemu-devel] [PULL 28/37] virtio: allow byte swapping for vring, Michael S. Tsirkin, 2014/06/29
- [Qemu-devel] [PULL 29/37] virtio-net: use virtio wrappers to access headers,
Michael S. Tsirkin <=
- [Qemu-devel] [PULL 30/37] virtio-balloon: use virtio wrappers to access page frame numbers, Michael S. Tsirkin, 2014/06/29
- [Qemu-devel] [PULL 31/37] virtio-blk: use virtio wrappers to access headers, Michael S. Tsirkin, 2014/06/29
- [Qemu-devel] [PULL 32/37] virtio-scsi: use virtio wrappers to access headers, Michael S. Tsirkin, 2014/06/29
- [Qemu-devel] [PULL 33/37] virtio-serial-bus: use virtio wrappers to access headers, Michael S. Tsirkin, 2014/06/29
- [Qemu-devel] [PULL 34/37] virtio-9p: use virtio wrappers to access headers, Michael S. Tsirkin, 2014/06/29
- [Qemu-devel] [PULL 35/37] target-ppc: enable virtio endian ambivalent support, Michael S. Tsirkin, 2014/06/29
- [Qemu-devel] [PULL 36/37] vhost-net: disable when cross-endian, Michael S. Tsirkin, 2014/06/29
- [Qemu-devel] [PULL 37/37] tests: add human format test for string output visitor, Michael S. Tsirkin, 2014/06/29
- Re: [Qemu-devel] [PULL 00/37] pc,vhost,virtio fixes, enhancements, Peter Maydell, 2014/06/29