[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PULL 01/22] target-arm: Break down TLB_LOCKDOWN
From: |
Peter Maydell |
Subject: |
[Qemu-devel] [PULL 01/22] target-arm: Break down TLB_LOCKDOWN |
Date: |
Tue, 2 Jun 2015 17:33:31 +0100 |
From: "Edgar E. Iglesias" <address@hidden>
Break down the overly broad wildcard definition of TLB_LOCKDOWN
down to v7 level.
Signed-off-by: Edgar E. Iglesias <address@hidden>
Message-id: address@hidden
Reviewed-by: Peter Maydell <address@hidden>
Signed-off-by: Peter Maydell <address@hidden>
---
target-arm/helper.c | 30 ++++++++++++++++++------------
1 file changed, 18 insertions(+), 12 deletions(-)
diff --git a/target-arm/helper.c b/target-arm/helper.c
index 1cc4993..a0b414c 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -492,10 +492,16 @@ static const ARMCPRegInfo not_v8_cp_reginfo[] = {
.writefn = dacr_write, .raw_writefn = raw_write,
.bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.dacr_s),
offsetoflow32(CPUARMState, cp15.dacr_ns) } },
- /* ??? This covers not just the impdef TLB lockdown registers but also
- * some v7VMSA registers relating to TEX remap, so it is overly broad.
+ /* ARMv7 allocates a range of implementation defined TLB LOCKDOWN regs.
+ * For v6 and v5, these mappings are overly broad.
*/
- { .name = "TLB_LOCKDOWN", .cp = 15, .crn = 10, .crm = CP_ANY,
+ { .name = "TLB_LOCKDOWN", .cp = 15, .crn = 10, .crm = 0,
+ .opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_RW, .type = ARM_CP_NOP },
+ { .name = "TLB_LOCKDOWN", .cp = 15, .crn = 10, .crm = 1,
+ .opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_RW, .type = ARM_CP_NOP },
+ { .name = "TLB_LOCKDOWN", .cp = 15, .crn = 10, .crm = 4,
+ .opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_RW, .type = ARM_CP_NOP },
+ { .name = "TLB_LOCKDOWN", .cp = 15, .crn = 10, .crm = 8,
.opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_RW, .type = ARM_CP_NOP },
/* Cache maintenance ops; some of this space may be overridden later. */
{ .name = "CACHEMAINT", .cp = 15, .crn = 7, .crm = CP_ANY,
@@ -555,6 +561,10 @@ static const ARMCPRegInfo not_v7_cp_reginfo[] = {
{ .name = "TLBIMVAA", .cp = 15, .crn = 8, .crm = CP_ANY,
.opc1 = CP_ANY, .opc2 = 3, .access = PL1_W, .writefn = tlbimvaa_write,
.type = ARM_CP_NO_RAW },
+ { .name = "PRRR", .cp = 15, .crn = 10, .crm = 2,
+ .opc1 = 0, .opc2 = 0, .access = PL1_RW, .type = ARM_CP_NOP },
+ { .name = "NMRR", .cp = 15, .crn = 10, .crm = 2,
+ .opc1 = 0, .opc2 = 1, .access = PL1_RW, .type = ARM_CP_NOP },
REGINFO_SENTINEL
};
@@ -1021,19 +1031,17 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
.resetvalue = 0 },
/* For non-long-descriptor page tables these are PRRR and NMRR;
* regardless they still act as reads-as-written for QEMU.
- * The override is necessary because of the overly-broad TLB_LOCKDOWN
- * definition.
*/
/* MAIR0/1 are defined separately from their 64-bit counterpart which
* allows them to assign the correct fieldoffset based on the endianness
* handled in the field definitions.
*/
- { .name = "MAIR0", .state = ARM_CP_STATE_AA32, .type = ARM_CP_OVERRIDE,
+ { .name = "MAIR0", .state = ARM_CP_STATE_AA32,
.cp = 15, .opc1 = 0, .crn = 10, .crm = 2, .opc2 = 0, .access = PL1_RW,
.bank_fieldoffsets = { offsetof(CPUARMState, cp15.mair0_s),
offsetof(CPUARMState, cp15.mair0_ns) },
.resetfn = arm_cp_reset_ignore },
- { .name = "MAIR1", .state = ARM_CP_STATE_AA32, .type = ARM_CP_OVERRIDE,
+ { .name = "MAIR1", .state = ARM_CP_STATE_AA32,
.cp = 15, .opc1 = 0, .crn = 10, .crm = 2, .opc2 = 1, .access = PL1_RW,
.bank_fieldoffsets = { offsetof(CPUARMState, cp15.mair1_s),
offsetof(CPUARMState, cp15.mair1_ns) },
@@ -2088,16 +2096,14 @@ static const ARMCPRegInfo mpidr_cp_reginfo[] = {
};
static const ARMCPRegInfo lpae_cp_reginfo[] = {
- /* NOP AMAIR0/1: the override is because these clash with the rather
- * broadly specified TLB_LOCKDOWN entry in the generic cp_reginfo.
- */
+ /* NOP AMAIR0/1 */
{ .name = "AMAIR0", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .crn = 10, .crm = 3, .opc1 = 0, .opc2 = 0,
- .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_OVERRIDE,
+ .access = PL1_RW, .type = ARM_CP_CONST,
.resetvalue = 0 },
/* AMAIR1 is mapped to AMAIR_EL1[63:32] */
{ .name = "AMAIR1", .cp = 15, .crn = 10, .crm = 3, .opc1 = 0, .opc2 = 1,
- .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_OVERRIDE,
+ .access = PL1_RW, .type = ARM_CP_CONST,
.resetvalue = 0 },
{ .name = "PAR", .cp = 15, .crm = 7, .opc1 = 0,
.access = PL1_RW, .type = ARM_CP_64BIT, .resetvalue = 0,
--
1.9.1
- [Qemu-devel] [PULL 00/22] target-arm queue, Peter Maydell, 2015/06/02
- [Qemu-devel] [PULL 22/22] hw/arm/virt: change indentation in a15memmap, Peter Maydell, 2015/06/02
- [Qemu-devel] [PULL 01/22] target-arm: Break down TLB_LOCKDOWN,
Peter Maydell <=
- [Qemu-devel] [PULL 20/22] hw/arm/boot: arm_load_kernel implemented as a machine init done notifier, Peter Maydell, 2015/06/02
- Re: [Qemu-devel] [PULL 20/22] hw/arm/boot: arm_load_kernel implemented as a machine init done notifier, Peter Crosthwaite, 2015/06/11
- Re: [Qemu-devel] [PULL 20/22] hw/arm/boot: arm_load_kernel implemented as a machine init done notifier, Eric Auger, 2015/06/12
- Re: [Qemu-devel] [PULL 20/22] hw/arm/boot: arm_load_kernel implemented as a machine init done notifier, Eric Auger, 2015/06/12
- Re: [Qemu-devel] [PULL 20/22] hw/arm/boot: arm_load_kernel implemented as a machine init done notifier, Peter Maydell, 2015/06/12
- Re: [Qemu-devel] [PULL 20/22] hw/arm/boot: arm_load_kernel implemented as a machine init done notifier, Peter Crosthwaite, 2015/06/12
- Re: [Qemu-devel] [PULL 20/22] hw/arm/boot: arm_load_kernel implemented as a machine init done notifier, Peter Maydell, 2015/06/12
- Re: [Qemu-devel] [PULL 20/22] hw/arm/boot: arm_load_kernel implemented as a machine init done notifier, Eric Auger, 2015/06/15
[Qemu-devel] [PULL 21/22] hw/arm/virt: add dynamic sysbus device support, Peter Maydell, 2015/06/02
[Qemu-devel] [PULL 17/22] arm_gicv2m: set kvm_gsi_direct_mapping and kvm_msi_via_irqfd_allowed, Peter Maydell, 2015/06/02