[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v2 08/15] target-mips: add microMIPS32 R6 opcode enu
From: |
Yongbok Kim |
Subject: |
[Qemu-devel] [PATCH v2 08/15] target-mips: add microMIPS32 R6 opcode enum |
Date: |
Fri, 19 Jun 2015 17:25:31 +0100 |
add microMIPS32 Release 6 opcode enum
remove RI checking for pre-R6 reserved opcode.
Signed-off-by: Yongbok Kim <address@hidden>
---
target-mips/translate.c | 119 ++++++++++++++++++++++++++++++++++++++++------
1 files changed, 103 insertions(+), 16 deletions(-)
diff --git a/target-mips/translate.c b/target-mips/translate.c
index 7ab9440..3dcaaec 100644
--- a/target-mips/translate.c
+++ b/target-mips/translate.c
@@ -12368,6 +12368,8 @@ enum {
LBU16 = 0x02,
MOVE16 = 0x03,
ADDI32 = 0x04,
+ R6_LUI = 0x04,
+ AUI = 0x04,
LBU32 = 0x05,
SB32 = 0x06,
LB32 = 0x07,
@@ -12390,56 +12392,88 @@ enum {
POOL32S = 0x16, /* MIPS64 */
DADDIU32 = 0x17, /* MIPS64 */
- /* 0x1f is reserved */
POOL32C = 0x18,
LWGP16 = 0x19,
LW16 = 0x1a,
POOL16E = 0x1b,
XORI32 = 0x1c,
JALS32 = 0x1d,
+ BOVC = 0x1d,
+ BEQC = 0x1d,
+ BEQZALC = 0x1d,
ADDIUPC = 0x1e,
+ PCREL = 0x1e,
+ BNVC = 0x1f,
+ BNEC = 0x1f,
+ BNEZALC = 0x1f,
- /* 0x20 is reserved */
- RES_20 = 0x20,
+ R6_BEQZC = 0x20,
+ JIC = 0x20,
POOL16F = 0x21,
SB16 = 0x22,
BEQZ16 = 0x23,
+ BEQZC16 = 0x23,
SLTI32 = 0x24,
BEQ32 = 0x25,
+ BC = 0x25,
SWC132 = 0x26,
LWC132 = 0x27,
- /* 0x28 and 0x29 are reserved */
- RES_28 = 0x28,
+ /* 0x29 is reserved */
RES_29 = 0x29,
+ R6_BNEZC = 0x28,
+ JIALC = 0x28,
SH16 = 0x2a,
BNEZ16 = 0x2b,
+ BNEZC16 = 0x2b,
SLTIU32 = 0x2c,
BNE32 = 0x2d,
+ BALC = 0x2d,
SDC132 = 0x2e,
LDC132 = 0x2f,
- /* 0x30 and 0x31 are reserved */
- RES_30 = 0x30,
+ /* 0x31 is reserved */
RES_31 = 0x31,
+ BLEZALC = 0x30,
+ BGEZALC = 0x30,
+ BGEUC = 0x30,
SWSP16 = 0x32,
B16 = 0x33,
+ BC16 = 0x33,
ANDI32 = 0x34,
J32 = 0x35,
+ BGTZC = 0x35,
+ BLTZC = 0x35,
+ BLTC = 0x35,
SD32 = 0x36, /* MIPS64 */
LD32 = 0x37, /* MIPS64 */
- /* 0x38 and 0x39 are reserved */
- RES_38 = 0x38,
+ /* 0x39 is reserved */
RES_39 = 0x39,
+ BGTZALC = 0x38,
+ BLTZALC = 0x38,
+ BLTUC = 0x38,
SW16 = 0x3a,
LI16 = 0x3b,
JALX32 = 0x3c,
JAL32 = 0x3d,
+ BLEZC = 0x3d,
+ BGEZC = 0x3d,
+ BGEC = 0x3d,
SW32 = 0x3e,
LW32 = 0x3f
};
+/* PCREL Instructions perform PC-Relative address calculation. bits 20..16 */
+enum {
+ ADDIUPC_00 = 0x00,
+ ADDIUPC_07 = 0x07,
+ AUIPC = 0x1e,
+ ALUIPC = 0x1f,
+ LWPC_08 = 0x08,
+ LWPC_0F = 0x0F,
+};
+
/* POOL32A encoding of minor opcode field */
enum {
@@ -12449,6 +12483,8 @@ enum {
SRL32 = 0x1,
SRA = 0x2,
ROTR = 0x3,
+ SELEQZ = 0x5,
+ SELNEZ = 0x6,
SLLV = 0x0,
SRLV = 0x1,
@@ -12467,11 +12503,21 @@ enum {
SLTU = 0xe,
MOVN = 0x0,
+ R6_MUL = 0x0,
MOVZ = 0x1,
+ MUH = 0x1,
+ MULU = 0x2,
+ MUHU = 0x3,
LWXS = 0x4,
+ R6_DIV = 0x4,
+ MOD = 0x5,
+ R6_DIVU = 0x6,
+ MODU = 0x7,
/* The following can be distinguished by their lower 6 bits. */
INS = 0x0c,
+ LSA = 0x0f,
+ ALIGN = 0x1f,
EXT = 0x2c,
POOL32AXF = 0x3c
};
@@ -12524,6 +12570,7 @@ enum {
/* end of microMIPS32 DSP */
/* bits 15..12 for 0x2c */
+ BITSWAP = 0x0,
SEB = 0x2,
SEH = 0x3,
CLO = 0x4,
@@ -12550,7 +12597,10 @@ enum {
/* bits 15..12 for 0x3c */
JALR = 0x0,
JR = 0x0, /* alias */
+ JALRC = 0x0,
+ JRC = 0x0,
JALR_HB = 0x1,
+ JALRC_HB = 0x1,
JALRS = 0x4,
JALRS_HB = 0x5,
@@ -12634,32 +12684,39 @@ enum {
enum {
/* These are the bit 7..6 values */
ADD_FMT = 0x0,
- MOVN_FMT = 0x0,
SUB_FMT = 0x1,
- MOVZ_FMT = 0x1,
MUL_FMT = 0x2,
DIV_FMT = 0x3,
/* These are the bit 8..6 values */
+ MOVN_FMT = 0x0,
RSQRT2_FMT = 0x0,
MOVF_FMT = 0x0,
+ RINT_FMT = 0x0,
+ SELNEZ_FMT = 0x0,
+ MOVZ_FMT = 0x1,
LWXC1 = 0x1,
MOVT_FMT = 0x1,
+ CLASS_FMT = 0x1,
+ SELEQZ_FMT = 0x1,
PLL_PS = 0x2,
SWXC1 = 0x2,
+ SEL_FMT = 0x2,
PLU_PS = 0x3,
LDXC1 = 0x3,
+ MOVN_FMT_04 = 0x4,
PUL_PS = 0x4,
SDXC1 = 0x4,
RECIP2_FMT = 0x4,
+ MOVZ_FMT_05 = 0x05,
PUU_PS = 0x5,
LUXC1 = 0x5,
@@ -12667,8 +12724,10 @@ enum {
SUXC1 = 0x6,
ADDR_PS = 0x6,
PREFX = 0x6,
+ MADDF_FMT = 0x6,
MULR_PS = 0x7,
+ MSUBF_FMT = 0x7,
MADD_S = 0x01,
MADD_D = 0x09,
@@ -12685,10 +12744,17 @@ enum {
NMSUB_D = 0x2a,
NMSUB_PS = 0x32,
+ MIN_FMT = 0x3,
+ MAX_FMT = 0xb,
+ MINA_FMT = 0x23,
+ MAXA_FMT = 0x2b,
POOL32FXF = 0x3b,
CABS_COND_FMT = 0x1c, /* MIPS3D */
- C_COND_FMT = 0x3c
+ C_COND_FMT = 0x3c,
+
+ CMP_CONDN_S = 0x5,
+ CMP_CONDN_D = 0x15
};
/* POOL32Fxf encoding of minor opcode extension field */
@@ -12741,10 +12807,15 @@ enum {
BGTZ = 0x06,
BEQZC = 0x07,
TLTI = 0x08,
+ BC1EQZC = 0x08,
TGEI = 0x09,
+ BC1NEZC = 0x09,
TLTIU = 0x0a,
+ BC2EQZC = 0x0a,
TGEIU = 0x0b,
+ BC2NEZC = 0x0a,
TNEI = 0x0c,
+ R6_SYNCI = 0x0c,
LUI = 0x0d,
TEQI = 0x0e,
SYNCI = 0x10,
@@ -12797,6 +12868,26 @@ enum {
JRADDIUSP = 0x30
};
+/* R6 POOL16C encoding of minor opcode field (bits 0..5) */
+
+enum {
+ R6_NOT16 = 0x00,
+ R6_AND16 = 0x01,
+ R6_LWM16 = 0x02,
+ R6_JRC16 = 0x03,
+ MOVEP = 0x04,
+ MOVEP_07 = 0x07,
+ R6_XOR16 = 0x08,
+ R6_OR16 = 0x09,
+ R6_SWM16 = 0x0a,
+ JALRC16 = 0x0b,
+ MOVEP_0C = 0x0c,
+ MOVEP_0F = 0x0f,
+ JRCADDIUSP = 0x13,
+ R6_BREAK16 = 0x1b,
+ R6_SDBBP16 = 0x3b
+};
+
/* POOL16D encoding of minor opcode field */
enum {
@@ -14838,12 +14929,8 @@ static int decode_micromips_opc (CPUMIPSState *env,
DisasContext *ctx)
tcg_gen_movi_tl(cpu_gpr[reg], imm);
}
break;
- case RES_20:
- case RES_28:
case RES_29:
- case RES_30:
case RES_31:
- case RES_38:
case RES_39:
generate_exception(ctx, EXCP_RI);
break;
--
1.7.5.4
- [Qemu-devel] [PATCH v2 07/15] target-mips: signal RI for removed instructions in microMIPS R6, (continued)
- [Qemu-devel] [PATCH v2 07/15] target-mips: signal RI for removed instructions in microMIPS R6, Yongbok Kim, 2015/06/19
- [Qemu-devel] [PATCH v2 06/15] target-mips: raise RI exceptions when FIR.PS = 0, Yongbok Kim, 2015/06/19
- [Qemu-devel] [PATCH v2 14/15] target-mips: microMIPS32 R6 POOL16{A, C} instructions, Yongbok Kim, 2015/06/19
- [Qemu-devel] [PATCH v2 15/15] target-mips: add mips32r6-generic CPU definition, Yongbok Kim, 2015/06/19
- [Qemu-devel] [PATCH v2 13/15] target-mips: microMIPS32 R6 Major instructions, Yongbok Kim, 2015/06/19
- [Qemu-devel] [PATCH v2 08/15] target-mips: add microMIPS32 R6 opcode enum,
Yongbok Kim <=
- [Qemu-devel] [PATCH v2 12/15] target-mips: microMIPS32 R6 POOL32{I, C} instructions, Yongbok Kim, 2015/06/19
- [Qemu-devel] [PATCH v2 11/15] target-mips: microMIPS32 R6 POOL32F instructions, Yongbok Kim, 2015/06/19
- [Qemu-devel] [PATCH v2 10/15] target-mips: microMIPS32 R6 POOL32A{XF} instructions, Yongbok Kim, 2015/06/19
- [Qemu-devel] [PATCH v2 09/15] target-mips: microMIPS32 R6 branches and jumps, Yongbok Kim, 2015/06/19