[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH 08/10] iotests: 124 - transactional failure test
From: |
Stefan Hajnoczi |
Subject: |
[Qemu-devel] [PATCH 08/10] iotests: 124 - transactional failure test |
Date: |
Thu, 25 Jun 2015 13:12:10 +0100 |
From: John Snow <address@hidden>
Use a transaction to request an incremental backup across two drives.
Coerce one of the jobs to fail, and then re-run the transaction.
Verify that no bitmap data was lost due to the partial transaction
failure.
Signed-off-by: John Snow <address@hidden>
Reviewed-by: Max Reitz <address@hidden>
Signed-off-by: Stefan Hajnoczi <address@hidden>
---
tests/qemu-iotests/124 | 126 ++++++++++++++++++++++++++++++++++++++++++++-
tests/qemu-iotests/124.out | 4 +-
2 files changed, 127 insertions(+), 3 deletions(-)
diff --git a/tests/qemu-iotests/124 b/tests/qemu-iotests/124
index 530a392..a7c33f1 100644
--- a/tests/qemu-iotests/124
+++ b/tests/qemu-iotests/124
@@ -139,9 +139,12 @@ class TestIncrementalBackup(iotests.QMPTestCase):
def do_qmp_backup(self, error='Input/output error', **kwargs):
res = self.vm.qmp('drive-backup', **kwargs)
self.assert_qmp(res, 'return', {})
+ return self.wait_qmp_backup(kwargs['device'], error)
+
+ def wait_qmp_backup(self, device, error='Input/output error'):
event = self.vm.event_wait(name="BLOCK_JOB_COMPLETED",
- match={'data': {'device':
kwargs['device']}})
+ match={'data': {'device': device}})
self.assertNotEqual(event, None)
try:
@@ -156,6 +159,12 @@ class TestIncrementalBackup(iotests.QMPTestCase):
return False
+ def wait_qmp_backup_cancelled(self, device):
+ event = self.vm.event_wait(name='BLOCK_JOB_CANCELLED',
+ match={'data': {'device': device}})
+ self.assertNotEqual(event, None)
+
+
def create_anchor_backup(self, drive=None):
if drive is None:
drive = self.drives[-1]
@@ -375,6 +384,121 @@ class TestIncrementalBackup(iotests.QMPTestCase):
self.check_backups()
+ def test_transaction_failure(self):
+ '''Test: Verify backups made from a transaction that partially fails.
+
+ Add a second drive with its own unique pattern, and add a bitmap to
each
+ drive. Use blkdebug to interfere with the backup on just one drive and
+ attempt to create a coherent incremental backup across both drives.
+
+ verify a failure in one but not both, then delete the failed stubs and
+ re-run the same transaction.
+
+ verify that both incrementals are created successfully.
+ '''
+
+ # Create a second drive, with pattern:
+ drive1 = self.add_node('drive1')
+ self.img_create(drive1['file'], drive1['fmt'])
+ io_write_patterns(drive1['file'], (('0x14', 0, 512),
+ ('0x5d', '1M', '32k'),
+ ('0xcd', '32M', '124k')))
+
+ # Create a blkdebug interface to this img as 'drive1'
+ result = self.vm.qmp('blockdev-add', options={
+ 'id': drive1['id'],
+ 'driver': drive1['fmt'],
+ 'file': {
+ 'driver': 'blkdebug',
+ 'image': {
+ 'driver': 'file',
+ 'filename': drive1['file']
+ },
+ 'set-state': [{
+ 'event': 'flush_to_disk',
+ 'state': 1,
+ 'new_state': 2
+ }],
+ 'inject-error': [{
+ 'event': 'read_aio',
+ 'errno': 5,
+ 'state': 2,
+ 'immediately': False,
+ 'once': True
+ }],
+ }
+ })
+ self.assert_qmp(result, 'return', {})
+
+ # Create bitmaps and full backups for both drives
+ drive0 = self.drives[0]
+ dr0bm0 = self.add_bitmap('bitmap0', drive0)
+ dr1bm0 = self.add_bitmap('bitmap0', drive1)
+ self.create_anchor_backup(drive0)
+ self.create_anchor_backup(drive1)
+ self.assert_no_active_block_jobs()
+ self.assertFalse(self.vm.get_qmp_events(wait=False))
+
+ # Emulate some writes
+ self.hmp_io_writes(drive0['id'], (('0xab', 0, 512),
+ ('0xfe', '16M', '256k'),
+ ('0x64', '32736k', '64k')))
+ self.hmp_io_writes(drive1['id'], (('0xba', 0, 512),
+ ('0xef', '16M', '256k'),
+ ('0x46', '32736k', '64k')))
+
+ # Create incremental backup targets
+ target0 = self.prepare_backup(dr0bm0)
+ target1 = self.prepare_backup(dr1bm0)
+
+ # Ask for a new incremental backup per-each drive,
+ # expecting drive1's backup to fail:
+ transaction = [
+ transaction_drive_backup(drive0['id'], target0,
sync='dirty-bitmap',
+ format=drive0['fmt'], mode='existing',
+ bitmap=dr0bm0.name),
+ transaction_drive_backup(drive1['id'], target1,
sync='dirty-bitmap',
+ format=drive1['fmt'], mode='existing',
+ bitmap=dr1bm0.name),
+ ]
+ result = self.vm.qmp('transaction', actions=transaction)
+ self.assert_qmp(result, 'return', {})
+
+ # Observe that drive0's backup is cancelled and drive1 completes with
+ # an error.
+ self.wait_qmp_backup_cancelled(drive0['id'])
+ self.assertFalse(self.wait_qmp_backup(drive1['id']))
+ error = self.vm.event_wait('BLOCK_JOB_ERROR')
+ self.assert_qmp(error, 'data', {'device': drive1['id'],
+ 'action': 'report',
+ 'operation': 'read'})
+ self.assertFalse(self.vm.get_qmp_events(wait=False))
+ self.assert_no_active_block_jobs()
+
+ # Delete drive0's successful target and eliminate our record of the
+ # unsuccessful drive1 target. Then re-run the same transaction.
+ dr0bm0.del_target()
+ dr1bm0.del_target()
+ target0 = self.prepare_backup(dr0bm0)
+ target1 = self.prepare_backup(dr1bm0)
+
+ # Re-run the exact same transaction.
+ result = self.vm.qmp('transaction', actions=transaction)
+ self.assert_qmp(result, 'return', {})
+
+ # Both should complete successfully this time.
+ self.assertTrue(self.wait_qmp_backup(drive0['id']))
+ self.assertTrue(self.wait_qmp_backup(drive1['id']))
+ self.make_reference_backup(dr0bm0)
+ self.make_reference_backup(dr1bm0)
+ self.assertFalse(self.vm.get_qmp_events(wait=False))
+ self.assert_no_active_block_jobs()
+
+ # And the images should of course validate.
+ self.vm.shutdown()
+ self.check_backups()
+
+
def test_sync_dirty_bitmap_missing(self):
self.assert_no_active_block_jobs()
self.files.append(self.err_img)
diff --git a/tests/qemu-iotests/124.out b/tests/qemu-iotests/124.out
index 594c16f..dae404e 100644
--- a/tests/qemu-iotests/124.out
+++ b/tests/qemu-iotests/124.out
@@ -1,5 +1,5 @@
-........
+.........
----------------------------------------------------------------------
-Ran 8 tests
+Ran 9 tests
OK
--
2.4.3
- [Qemu-devel] [PATCH 04/10] block: keep bitmap if incremental backup job is cancelled, (continued)
- [Qemu-devel] [PATCH 04/10] block: keep bitmap if incremental backup job is cancelled, Stefan Hajnoczi, 2015/06/25
- [Qemu-devel] [PATCH 03/10] block: rename BlkTransactionState and BdrvActionOps, Stefan Hajnoczi, 2015/06/25
- [Qemu-devel] [PATCH 06/10] blockdev: make BlockJobTxn available to qmp 'transaction', Stefan Hajnoczi, 2015/06/25
- [Qemu-devel] [PATCH 07/10] block/backup: support block job transactions, Stefan Hajnoczi, 2015/06/25
- [Qemu-devel] [PATCH 05/10] block: add block job transactions, Stefan Hajnoczi, 2015/06/25
- [Qemu-devel] [PATCH 09/10] qmp-commands.hx: Update the supported 'transaction' operations, Stefan Hajnoczi, 2015/06/25
- [Qemu-devel] [PATCH 08/10] iotests: 124 - transactional failure test,
Stefan Hajnoczi <=
- [Qemu-devel] [PATCH 10/10] tests: add BlockJobTxn unit test, Stefan Hajnoczi, 2015/06/25
- Re: [Qemu-devel] [PATCH 00/10] block: incremental backup transactions using BlockJobTxn, Stefan Hajnoczi, 2015/06/29