[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PULL 16/17] hw/pci-bridge: format special OFW unit add
From: |
Laszlo Ersek |
Subject: |
Re: [Qemu-devel] [PULL 16/17] hw/pci-bridge: format special OFW unit address for PXB host |
Date: |
Fri, 26 Jun 2015 16:28:58 +0200 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.7.0 |
On 06/26/15 15:46, Michael S. Tsirkin wrote:
> From: Laszlo Ersek <address@hidden>
>
> We have agreed that OpenFirmware device paths in the "bootorder" fw_cfg
> file should follow the pattern
>
> /address@hidden,%x/...
>
> for devices that live behind an extra root bus. The extra root bus in
> question is the %x'th among the extra root buses. (In other words, %x
> gives the position of the affected extra root bus relative to the other
> extra root buses, in bus_nr order.) %x starts at 1, and is formatted in
> hex.
>
> The portion of the unit address that comes before the comma is dynamically
> taken from the main host bridge, similarly to sysbus_get_fw_dev_path().
>
> Cc: Kevin O'Connor <address@hidden>
> Cc: Michael S. Tsirkin <address@hidden>
> Cc: Marcel Apfelbaum <address@hidden>
> Signed-off-by: Laszlo Ersek <address@hidden>
> Reviewed-by: Michael S. Tsirkin <address@hidden>
> Signed-off-by: Michael S. Tsirkin <address@hidden>
> ---
> hw/pci-bridge/pci_expander_bridge.c | 53
> +++++++++++++++++++++++++++++++++++++
> 1 file changed, 53 insertions(+)
>
> diff --git a/hw/pci-bridge/pci_expander_bridge.c
> b/hw/pci-bridge/pci_expander_bridge.c
> index 70708ef..57f8a37 100644
> --- a/hw/pci-bridge/pci_expander_bridge.c
> +++ b/hw/pci-bridge/pci_expander_bridge.c
> @@ -43,6 +43,8 @@ typedef struct PXBDev {
> uint16_t numa_node;
> } PXBDev;
>
> +static GList *pxb_dev_list;
> +
> #define TYPE_PXB_HOST "pxb-host"
>
> static int pxb_bus_num(PCIBus *bus)
> @@ -89,12 +91,45 @@ static const char *pxb_host_root_bus_path(PCIHostState
> *host_bridge,
> return bus->bus_path;
> }
>
> +static char *pxb_host_ofw_unit_address(const SysBusDevice *dev)
> +{
> + const PCIHostState *pxb_host;
> + const PCIBus *pxb_bus;
> + const PXBDev *pxb_dev;
> + int position;
> + const DeviceState *pxb_dev_base;
> + const PCIHostState *main_host;
> + const SysBusDevice *main_host_sbd;
> +
> + pxb_host = PCI_HOST_BRIDGE(dev);
> + pxb_bus = pxb_host->bus;
> + pxb_dev = PXB_DEV(pxb_bus->parent_dev);
> + position = g_list_index(pxb_dev_list, pxb_dev);
> + assert(position >= 0);
> +
> + pxb_dev_base = DEVICE(pxb_dev);
> + main_host = PCI_HOST_BRIDGE(pxb_dev_base->parent_bus->parent);
> + main_host_sbd = SYS_BUS_DEVICE(main_host);
> +
> + if (main_host_sbd->num_mmio > 0) {
> + return g_strdup_printf(TARGET_FMT_plx ",%x",
> + main_host_sbd->mmio[0].addr, position + 1);
> + }
> + if (main_host_sbd->num_pio > 0) {
> + return g_strdup_printf("i%04x,%x",
> + main_host_sbd->pio[0], position + 1);
> + }
> + return NULL;
> +}
> +
> static void pxb_host_class_init(ObjectClass *class, void *data)
> {
> DeviceClass *dc = DEVICE_CLASS(class);
> + SysBusDeviceClass *sbc = SYS_BUS_DEVICE_CLASS(class);
> PCIHostBridgeClass *hc = PCI_HOST_BRIDGE_CLASS(class);
>
> dc->fw_name = "pci";
> + sbc->explicit_ofw_unit_address = pxb_host_ofw_unit_address;
> hc->root_bus_path = pxb_host_root_bus_path;
> }
>
> @@ -149,6 +184,15 @@ static int pxb_map_irq_fn(PCIDevice *pci_dev, int pin)
> return pin - PCI_SLOT(pxb->devfn);
> }
>
> +static gint pxb_compare(gconstpointer a, gconstpointer b)
> +{
> + const PXBDev *pxb_a = a, *pxb_b = b;
> +
> + return pxb_a->bus_nr < pxb_b->bus_nr ? -1 :
> + pxb_a->bus_nr > pxb_b->bus_nr ? 1 :
> + 0;
> +}
> +
> static int pxb_dev_initfn(PCIDevice *dev)
> {
> PXBDev *pxb = PXB_DEV(dev);
> @@ -192,9 +236,17 @@ static int pxb_dev_initfn(PCIDevice *dev)
> PCI_STATUS_66MHZ | PCI_STATUS_FAST_BACK);
> pci_config_set_class(dev->config, PCI_CLASS_BRIDGE_HOST);
>
> + pxb_dev_list = g_list_insert_sorted(pxb_dev_list, pxb, pxb_compare);
> return 0;
> }
>
> +static void pxb_dev_exitfn(PCIDevice *pci_dev)
> +{
> + PXBDev *pxb = PXB_DEV(pci_dev);
> +
> + pxb_dev_list = g_list_remove(pxb_dev_list, pxb);
> +}
> +
> static Property pxb_dev_properties[] = {
> /* Note: 0 is not a legal a PXB bus number. */
> DEFINE_PROP_UINT8("bus_nr", PXBDev, bus_nr, 0),
> @@ -208,6 +260,7 @@ static void pxb_dev_class_init(ObjectClass *klass, void
> *data)
> PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
>
> k->init = pxb_dev_initfn;
> + k->exit = pxb_dev_exitfn;
> k->vendor_id = PCI_VENDOR_ID_REDHAT;
> k->device_id = PCI_DEVICE_ID_REDHAT_PXB;
> k->class_id = PCI_CLASS_BRIDGE_HOST;
>
I'm surprised. :) But, nonetheless: thankful.
I guess Marcel will implement that followup patch that you would like to
see. (Thanks for that again, Marcel!)
I'll do my best next time around to be *even more* patient. If that's
possible under the currently known laws of the universe :)
Cheers
Laszlo
- [Qemu-devel] [PULL 07/17] add pci-bridge-seat, (continued)
- [Qemu-devel] [PULL 07/17] add pci-bridge-seat, Michael S. Tsirkin, 2015/06/26
- [Qemu-devel] [PULL 08/17] migration: introduce VMSTATE_BUFFER_UNSAFE_INFO_TEST(), Michael S. Tsirkin, 2015/06/26
- [Qemu-devel] [PULL 09/17] hw/pci-bridge: expose _test parameter in SHPC_VMSTATE(), Michael S. Tsirkin, 2015/06/26
- [Qemu-devel] [PULL 10/17] hw/pci-bridge: add macro for "chassis_nr" property, Michael S. Tsirkin, 2015/06/26
- [Qemu-devel] [PULL 11/17] hw/pci-bridge: add macro for "msi" property, Michael S. Tsirkin, 2015/06/26
- [Qemu-devel] [PULL 12/17] hw/pci: introduce shpc_present() helper function, Michael S. Tsirkin, 2015/06/26
- [Qemu-devel] [PULL 13/17] hw/pci-bridge: introduce "shpc" property, Michael S. Tsirkin, 2015/06/26
- [Qemu-devel] [PULL 15/17] hw/core: explicit OFW unit address callback for SysBusDeviceClass, Michael S. Tsirkin, 2015/06/26
- [Qemu-devel] [PULL 14/17] hw/pci-bridge: disable SHPC in PXB, Michael S. Tsirkin, 2015/06/26
- [Qemu-devel] [PULL 16/17] hw/pci-bridge: format special OFW unit address for PXB host, Michael S. Tsirkin, 2015/06/26
- Re: [Qemu-devel] [PULL 16/17] hw/pci-bridge: format special OFW unit address for PXB host,
Laszlo Ersek <=
- [Qemu-devel] [PULL 17/17] Fix glib_subprocess test, Michael S. Tsirkin, 2015/06/26
- Re: [Qemu-devel] [PULL 00/17] virtio, pci fixes, enhancements, Peter Maydell, 2015/06/29