[Qemu-devel] [PATCH v17 0/6] KVM platform device passthrough

[Eric Auger]

Those remaining patches aim at enabling irqfd usage in the VFIO platform
device

They can be found at :
http://git.linaro.org/people/eric.auger/qemu.git
(branch vfio_integ_v17)

Tested by Vikram Sethi on a device featuring 2 MMIO regions.
Code also exercised successfully by VOSYS for AMBA derivative series.

Thanks

Eric

v16 -> v17:
- add Paolo's A-b on [1-3]
- Take into account Peter's comments
- add [kvm: some fixes to kvm_resamplefds_allowed] to bring non-KVM
  version of kvm_resamplefds_allowed
- remove #ifdef CONFIG_KVM in last patch

v15 -> v16:
- no code change
- add Vikram's T-b
- rebase on 0915aed
- remove linux header update patch file

v14 -> v15:
- add Peter R-b on sysbus: add irq_routing_notifier
- correct g_malloc0_n usage in skeleton
- correct return values of reset related functions
- include Cornelia's patch for header update

v13 -> v14:
- remove v13 9, 10, 11 patch files and replace them by a single patch file
  "sysbus: add irq_routing_notifier".
- in skeleton, fix ENAMETOOLONG sign
- remove VFIOINTp virtualID in "add irq assignment" patch file
- removed trace_vfio_platform_start_eventfd

v12 -> v13:
- header update but same update was already sent by Cornelia
- Rework VFIO signaling & irqfd setup: restored 2-step setup featuring
  eventfd setup on realize and then irqfd setup on irq binding.
- irqfd setup now uses kvm_irqchip_add_irqfd_notifier and
  sysbus irq_set_hook override. This leads to the introduction of 6 patch
  files enabling those 2 features. Paolo advised to introduce
  kvm_irqchip_add_irqfd_notifier series in the VFIO one. I did the
  same for irq_set_hook series but if it is better I can submit it aside.
- above changes made possible to remove
  x hw/vfio/platform: add capability to start IRQ propagation"
  x hw/arm/virt: start VFIO IRQ propagation
- in sysbus-fdt.c, use platform_bus_get_mmio_addr instead of deprecated
  mmio[0] property. Thanks to Bharat who pointed this issue out. also
  cpu_to_be32 was used for size and base (Vikram input) .
- in skeleton misc corrections following Alex review.

v11->v12:
- add x-mmap property definition, without which the default value of
  vbasedev.allow_mmap is false, hence preventing the reg space from
  being mmapped.

v10->v11:
- rebase onto v2.3.0-rc0 (mainly related to PCIe support in virt)
- add dma-coherent property for calxeda midway (fix revealed by removal
  of kernel-side "vfio: type1: support for ARM SMMUS with VFIO_IOMMU_TYPE1")
- virt modifications to start VFIO IRQ forwarding are now in a separate
  patch
- rearrange linux header exports (those are still partial exports
  waiting for definitive 4.1-rc0)
- take into account Alex Bennée comments:
  - use g_malloc0_n instead of g_malloc0
  - use block declarations when possible
  - rework readlink returned value treatment
  - use g_strlcat in place strncat
  - re-arrange mutex locking for multiple IRQ support (user-side handled
    eventfds)
- use g_snprintf instead of snprintf
- change the order of functions to avoid pre-declaration in platform.c
- add flags in VFIOINTp struct to detect whether the IRQ is automasked
- some comment rewriting

v9->v10:
- rebase on "vfio: cleanup vfio_get_device error path, remove
  vfio_populate_device": vfio_populate_device no more called in
  vfio_get_device but in vfio_base_device_init
- update VFIO header according to vfio platform driver v13 (no AMBA)

v8->v9:
- rebase on 2.2.0 and machvirt dynamic sysbus instantiation v10
- v8 1-11 were pulled
- patch files related to forwarding are moved in a seperate series since
  it depends on kernel series still in RFC.
- introduction of basic VFIO platform device split into 3 patch files to
  ease the review (hope it will help).
- add an author in platform.c
- add deallocation in vfio_populate_device error case
- add patch file doing the VFIO header sync
- use VFIO_DEVICE_FLAGS_PLATFORM in vfio_populate_device
- rename calxeda_xgmac.c into calxeda-xgmac.c
- sysbus-fdt: add_calxeda_midway_xgmac_fdt_node g_free in case of errors
- reword of linux-headers patch files

v7->v8:
- rebase on v2.2.0-rc3 and integrate
  "Add skip_dump flag to ignore memory region during dump"
- KVM header evolution with subindex addition in kvm_arch_forwarded_irq
- split [PATCH v7 03/16] hw/vfio/pci: introduce VFIODevice into 4 patches
- vfio_compute_needs_reset does not return bool anymore
- add some comments about exposed MMIO region and IRQ in calxeda xgmac
  device
- vfio_[un]mask_irqindex renamed into vfio_[un]mask_single_irqindex
- rework IRQ startup: former machine init done notifier is replaced by a
  reset notifier. machine file passes the interrupt controller
  DeviceState handle (not the platform bus first irq parameter).
- sysbus-fdt:
  - move the add_fdt_node_functions array declaration between the device
    specific code and the generic code to avoid forward declarations of
    decice specific functions
  - rename add_basic_vfio_fdt_node into add_calxeda_midway_xgmac_fdt_node
    emphasizing the fact it is xgmac specific

v6->v7:
- fake injection test modality removed
- VFIO_DEVICE_TYPE_PLATFORM only introduced with VFIO platform
- new helper functions to start VFIO IRQ on machine init done notifier
  (introduced in hw/vfio/platform: add vfio-platform support and notifier
  registration invoked in hw/arm/virt: add support for VFIO devices).
  vfio_start_irq_injection is replaced by vfio_register_irq_starter.

v5->v6:
- rebase on 2.1rc5 PCI code
- forwarded IRQ first integraton
- vfio_device property renamed into host property
- split IRQ setup in different functions that match the 3 supported
  injection techniques (user handled eventfd, irqfd, forwarded IRQ):
  removes dynamic switch between injection methods
- introduce fake interrupts as a test modality:
  x makes possible to test multiple IRQ user-side handling.
  x this is a test feature only: enable to trigger a fd as if the
    real physical IRQ hit. No virtual IRQ is injected into the guest
    but handling is simulated so that the state machine can be tested
- user handled eventfd:
  x add mutex to protect IRQ state & list manipulation,
  x correct misleading comment in vfio_intp_interrupt.
  x Fix bugs using fake interrupt modality
- irqfd no more advertised in this patchset (handled in [3])
- VFIOPlatformDeviceClass becomes abstract and Calxeda xgmac device
  and class is re-introduced (as per v4)
- all DPRINTF removed in platform and replaced by trace-points
- corrects compilation with configure --disable-kvm
- simplifies the split for vfio_get_device and introduce a unique
  specialized function named vfio_populate_device
- group_list renamed into vfio_group_list
- hw/arm/dyn_sysbus_devtree.c currently only support vfio-calxeda-xgmac
  instantiation. Needs to be specialized for other VFIO devices
- fix 2 bugs in dyn_sysbus_devtree(reg_attr index and compat)

v4->v5:
- rebase on v2.1.0 PCI code
- take into account Alex Williamson comments on PCI code rework
  - trace updates in vfio_region_write/read
  - remove fd from VFIORegion
  - get/put ckeanup
- bug fix: bar region's vbasedev field duly initialization
- misc cleanups in platform device
- device tree node generation removed from device and handled in
  hw/arm/dyn_sysbus_devtree.c
- remove "hw/vfio: add an example calxeda_xgmac": with removal of
  device tree node generation we do not have so many things to
  implement in that derived device yet. May be re-introduced later
  on if needed typically for reset/migration.
- no GSI routing table anymore

v3->v4 changes (Eric Auger, Alvise Rigo)
- rebase on last VFIO PCI code (v2.1.0-rc0)
- full git history rework to ease PCI code change review
- mv include files in hw/vfio
- DPRINTF reformatting temporarily moved out
- support of VFIO virq (removal of resamplefd handler on user-side)
- integration with sysbus dynamic instantiation framwork
- removal of unrealize and cleanup routines until it is better
  understood what is really needed
- Support of VFIO for Amba devices should be handled in an inherited
  device to specialize the device tree generation (clock handle currently
  missing in framework however)
- "Always use eventfd as notifying mechanism" temporarily moved out
- static instantiation is not mainstream (although it remains possible)
  note if static instantiation is used, irqfd must be setup in machine file
  when virtual IRQ is known
- create the GSI routing table on qemu side

v2->v3 changes (Alvise Rigo, Eric Auger):
- Following Alex W recommandations, further efforts to factorize the
  code between PCI:introduction of VFIODevice and VFIORegion
  as base classes
- unique reset handler for platform and PCI
- cleanup following Kim's comments
- multiple IRQ support mechanics should be in place although not
  tested
- Better handling of MMIO multiple regions
- New features and fixes by Alvise (multiple compat string, exec
  flag, force eventfd usage, amba device tree support)
- irqfd support

v1->v2 changes (Kim Phillips, Eric Auger):
- IRQ initial support (legacy mode where eventfds are handled on
  user side)
- hacked dynamic instantiation

v1 (Kim Phillips):
- initial split between PCI and platform
- MMIO support only
- static instantiation

Best Regards

Eric


Eric Auger (6):
  kvm: rename kvm_irqchip_[add,remove]_irqfd_notifier with gsi suffix
  kvm-all.c: add qemu_irq/gsi hash table and utility routines
  intc: arm_gic_kvm: set the qemu_irq/gsi mapping
  sysbus: add irq_routing_notifier
  kvm: some fixes to kvm_resamplefds_allowed
  hw/vfio/platform: add irqfd support

 hw/core/sysbus.c                |   6 +++
 hw/intc/arm_gic_kvm.c           |   6 +++
 hw/s390x/virtio-ccw.c           |   8 ++--
 hw/vfio/pci.c                   |   6 +--
 hw/vfio/platform.c              | 103 ++++++++++++++++++++++++++++++++++++++++
 hw/virtio/virtio-pci.c          |   4 +-
 include/hw/sysbus.h             |   1 +
 include/hw/vfio/vfio-platform.h |   2 +
 include/sysemu/kvm.h            |  12 ++++-
 kvm-all.c                       |  40 ++++++++++++++--
 kvm-stub.c                      |   8 ++--
 trace-events                    |   1 +
 12 files changed, 180 insertions(+), 17 deletions(-)

-- 
1.8.3.2