[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v2 05/11] vfio: add check host bus reset is supp
From: |
Alex Williamson |
Subject: |
Re: [Qemu-devel] [PATCH v2 05/11] vfio: add check host bus reset is support or not |
Date: |
Wed, 9 Mar 2016 09:59:04 -0700 |
On Wed, 9 Mar 2016 18:47:35 +0200
"Michael S. Tsirkin" <address@hidden> wrote:
> On Mon, Mar 07, 2016 at 11:22:58AM +0800, Cao jin wrote:
> > From: Chen Fan <address@hidden>
> >
> > when boot up a VM that assigning vfio devices with aer enabled, we
> > must check the vfio device whether support host bus reset. because
> > when one error occur. OS driver always recover the device by do a
> > bus reset, in order to recover the vfio device, qemu must to do a
> > host bus reset to reset the device to default status. and for all
> > affected devices by the bus reset. we must check them whether all
> > are assigned to the VM.
> >
> > Signed-off-by: Chen Fan <address@hidden>
> > ---
> > hw/vfio/pci.c | 218
> > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++--
> > hw/vfio/pci.h | 1 +
> > 2 files changed, 212 insertions(+), 7 deletions(-)
> >
> > diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
> > index 8ec9b25..0898e34 100644
> > --- a/hw/vfio/pci.c
> > +++ b/hw/vfio/pci.c
> > @@ -1868,6 +1868,197 @@ static int vfio_add_std_cap(VFIOPCIDevice *vdev,
> > uint8_t pos)
> > return 0;
> > }
> >
> > +static bool vfio_pci_host_slot_match(PCIHostDeviceAddress *host1,
> > + PCIHostDeviceAddress *host2)
> > +{
> > + return (host1->domain == host2->domain && host1->bus == host2->bus &&
> > + host1->slot == host2->slot);
> > +}
> > +
> > +static bool vfio_pci_host_match(PCIHostDeviceAddress *host1,
> > + PCIHostDeviceAddress *host2)
> > +{
> > + return (vfio_pci_host_slot_match(host1, host2) &&
> > + host1->function == host2->function);
> > +}
> > +
> > +struct VFIODeviceFind {
> > + PCIDevice *pdev;
> > + bool found;
> > +};
> > +
> > +static void vfio_check_device_noreset(PCIBus *bus, PCIDevice *pdev,
> > + void *opaque)
> > +{
> > + DeviceState *dev = DEVICE(pdev);
> > + DeviceClass *dc = DEVICE_GET_CLASS(dev);
> > + VFIOPCIDevice *vdev;
> > + struct VFIODeviceFind *find = opaque;
> > +
> > + if (find->found) {
> > + return;
> > + }
> > +
> > + if (!object_dynamic_cast(OBJECT(dev), "vfio-pci")) {
> > + if (!dc->reset) {
> > + goto found;
> > + }
> > + return;
> > + }
> > + vdev = DO_UPCAST(VFIOPCIDevice, pdev, pdev);
> > + if (!(vdev->features & VFIO_FEATURE_ENABLE_AER) &&
> > + !vdev->vbasedev.reset_works) {
> > + goto found;
> > + }
> > +
> > + return;
> > +found:
> > + find->pdev = pdev;
> > + find->found = true;
> > +}
> > +
> > +static void vfio_check_host_bus_reset(VFIOPCIDevice *vdev, Error **errp)
> > +{
> > + PCIBus *bus = vdev->pdev.bus;
> > + struct vfio_pci_hot_reset_info *info = NULL;
> > + struct vfio_pci_dependent_device *devices;
> > + VFIOGroup *group;
> > + struct VFIODeviceFind find;
> > + int ret, i;
> > +
> > + ret = vfio_get_hot_reset_info(vdev, &info);
> > + if (ret) {
> > + error_setg(errp, "vfio: Cannot enable AER for device %s,"
> > + " device does not support hot reset.",
> > + vdev->vbasedev.name);
> > + return;
> > + }
> > +
> > + /* List all affected devices by bus reset */
> > + devices = &info->devices[0];
> > +
> > + /* Verify that we have all the groups required */
> > + for (i = 0; i < info->count; i++) {
> > + PCIHostDeviceAddress host;
> > + VFIOPCIDevice *tmp;
> > + VFIODevice *vbasedev_iter;
> > + bool found = false;
> > +
> > + host.domain = devices[i].segment;
> > + host.bus = devices[i].bus;
> > + host.slot = PCI_SLOT(devices[i].devfn);
> > + host.function = PCI_FUNC(devices[i].devfn);
> > +
> > + /* Skip the current device */
> > + if (vfio_pci_host_match(&host, &vdev->host)) {
> > + continue;
> > + }
> > +
> > + /* Ensure we own the group of the affected device */
> > + QLIST_FOREACH(group, &vfio_group_list, next) {
> > + if (group->groupid == devices[i].group_id) {
> > + break;
> > + }
> > + }
> > +
> > + if (!group) {
> > + error_setg(errp, "vfio: Cannot enable AER for device %s, "
> > + "depends on group %d which is not owned.",
> > + vdev->vbasedev.name, devices[i].group_id);
> > + goto out;
> > + }
> > +
> > + /* Ensure affected devices for reset on the same slot */
> > + QLIST_FOREACH(vbasedev_iter, &group->device_list, next) {
>
>
>
> So what you did here, first you let user build up
> all functions, then when finally function 0 is added,
> you go and check them all.
>
> Result is rather messy.
>
> Instead, make is_valid_func access two functions:
> existing one and new one.
> And this way each new function can validate that
> all existing functions are setup correctly,
> and each existing function can validate that
> the new one does not conflict with it.
Same problem as what you're proposed for 09/11, when bus reset is
involved, there may be no valid configuration of a subset of the
devices. Only when the entire set of devices is added does it become
valid. Thanks,
Alex
> > + if (vbasedev_iter->type != VFIO_DEVICE_TYPE_PCI) {
> > + continue;
> > + }
> > + tmp = container_of(vbasedev_iter, VFIOPCIDevice, vbasedev);
> > + if (vfio_pci_host_match(&host, &tmp->host)) {
> > + /*
> > + * AER errors may be broadcast to all functions of a multi-
> > + * function endpoint. If any of those sibling functions
> > are
> > + * also assigned, they need to have AER enabled or else an
> > + * error may continue to cause a vm_stop condition. IOW,
> > + * AER setup of this function would be pointless.
> > + */
> > + if (vfio_pci_host_slot_match(&vdev->host, &tmp->host) &&
> > + !(tmp->features & VFIO_FEATURE_ENABLE_AER)) {
> > + error_setg(errp, "vfio: Cannot enable AER for device
> > %s, on same slot"
> > + " the dependent device %s which does not
> > enable AER.",
> > + vdev->vbasedev.name, tmp->vbasedev.name);
> > + goto out;
> > + }
> > +
> > + if (tmp->pdev.bus != bus) {
> > + error_setg(errp, "vfio: Cannot enable AER for device
> > %s, "
> > + "the dependent device %s is not on the same
> > bus",
> > + vdev->vbasedev.name, tmp->vbasedev.name);
> > + goto out;
> > + }
> > + found = true;
> > + break;
> > + }
> > + }
> > +
> > + /* Ensure all affected devices assigned to VM */
> > + if (!found) {
> > + error_setg(errp, "vfio: Cannot enable AER for device %s, "
> > + "the dependent device %04x:%02x:%02x.%x "
> > + "is not assigned to VM.",
> > + vdev->vbasedev.name, host.domain, host.bus,
> > + host.slot, host.function);
> > + goto out;
> > + }
> > + }
> > +
> > + /*
> > + * Check the all pci devices on or below the target bus
> > + * have a reset mechanism at least.
> > + */
> > + find.pdev = NULL;
> > + find.found = false;
> > + pci_for_each_device(bus, pci_bus_num(bus),
> > + vfio_check_device_noreset, &find);
> > + if (find.found) {
> > + error_setg(errp, "vfio: Cannot enable AER for device %s, "
> > + "the affected device %s does not have a reset
> > mechanism.",
> > + vdev->vbasedev.name, find.pdev->name);
> > + goto out;
> > + }
> > +
> > +out:
> > + g_free(info);
> > + return;
> > +}
> > +
> > +static void vfio_check_devices_host_bus_reset(Error **errp)
> > +{
> > + VFIOGroup *group;
> > + VFIODevice *vbasedev;
> > + VFIOPCIDevice *vdev;
> > + Error *local_err = NULL;
> > +
> > + /* Check All vfio-pci devices if have bus reset capability */
> > + QLIST_FOREACH(group, &vfio_group_list, next) {
> > + QLIST_FOREACH(vbasedev, &group->device_list, next) {
> > + if (vbasedev->type != VFIO_DEVICE_TYPE_PCI) {
> > + continue;
> > + }
> > + vdev = container_of(vbasedev, VFIOPCIDevice, vbasedev);
> > + if (vdev->features & VFIO_FEATURE_ENABLE_AER) {
> > + vfio_check_host_bus_reset(vdev, &local_err);
> > + if (local_err) {
> > + error_propagate(errp, local_err);
> > + return;
> > + }
> > + }
> > + }
> > + }
> > +
> > + return;
> > +}
> > +
> > static int vfio_setup_aer(VFIOPCIDevice *vdev, uint8_t cap_ver,
> > int pos, uint16_t size)
> > {
> > @@ -2047,13 +2238,6 @@ static void vfio_pci_post_reset(VFIOPCIDevice *vdev)
> > vfio_intx_enable(vdev);
> > }
> >
> > -static bool vfio_pci_host_match(PCIHostDeviceAddress *host1,
> > - PCIHostDeviceAddress *host2)
> > -{
> > - return (host1->domain == host2->domain && host1->bus == host2->bus &&
> > - host1->slot == host2->slot && host1->function ==
> > host2->function);
> > -}
> > -
> > static int vfio_pci_hot_reset(VFIOPCIDevice *vdev, bool single)
> > {
> > VFIOGroup *group;
> > @@ -2559,6 +2743,21 @@ static void
> > vfio_unregister_req_notifier(VFIOPCIDevice *vdev)
> > vdev->req_enabled = false;
> > }
> >
> > +static void vfio_pci_machine_done_notify(Notifier *notifier, void *unused)
> > +{
> > + Error *local_err = NULL;
> > +
> > + vfio_check_devices_host_bus_reset(&local_err);
> > + if (local_err) {
> > + error_report_err(local_err);
> > + exit(1);
> > + }
> > +}
> > +
> > +static Notifier machine_notifier = {
> > + .notify = vfio_pci_machine_done_notify,
> > +};
> > +
> > static int vfio_initfn(PCIDevice *pdev)
> > {
> > VFIOPCIDevice *vdev = DO_UPCAST(VFIOPCIDevice, pdev, pdev);
> > @@ -2905,6 +3104,11 @@ static const TypeInfo vfio_pci_dev_info = {
> > static void register_vfio_pci_dev_type(void)
> > {
> > type_register_static(&vfio_pci_dev_info);
> > + /*
> > + * Register notifier when machine init is done, since we need
> > + * check the configration manner after all vfio device are inited.
> > + */
> > + qemu_add_machine_init_done_notifier(&machine_notifier);
> > }
> >
> > type_init(register_vfio_pci_dev_type)
> > diff --git a/hw/vfio/pci.h b/hw/vfio/pci.h
> > index e0c53f2..aff46c2 100644
> > --- a/hw/vfio/pci.h
> > +++ b/hw/vfio/pci.h
> > @@ -15,6 +15,7 @@
> > #include "qemu-common.h"
> > #include "exec/memory.h"
> > #include "hw/pci/pci.h"
> > +#include "hw/pci/pci_bus.h"
> > #include "hw/pci/pci_bridge.h"
> > #include "hw/vfio/vfio-common.h"
> > #include "qemu/event_notifier.h"
> > --
> > 1.9.3
> >
> >
- [Qemu-devel] [PATCH v2 03/11] vfio: add pcie extended capability support, (continued)
- [Qemu-devel] [PATCH v2 03/11] vfio: add pcie extended capability support, Cao jin, 2016/03/06
- [Qemu-devel] [PATCH v2 01/11] vfio: extract vfio_get_hot_reset_info as a single function, Cao jin, 2016/03/06
- [Qemu-devel] [PATCH v2 02/11] vfio: squeeze out vfio_pci_do_hot_reset for support bus reset, Cao jin, 2016/03/06
- [Qemu-devel] [PATCH v2 04/11] vfio: add aer support for vfio device, Cao jin, 2016/03/06
- [Qemu-devel] [PATCH v2 05/11] vfio: add check host bus reset is support or not, Cao jin, 2016/03/06
- [Qemu-devel] [PATCH v2 07/11] vfio: add check aer functionality for hotplug device, Cao jin, 2016/03/06
- [Qemu-devel] [PATCH v2 10/11] vfio-pci: pass the aer error to guest, Cao jin, 2016/03/06
- [Qemu-devel] [PATCH v2 06/11] pci: add a is_valid_func callback to check device if complete, Cao jin, 2016/03/06
[Qemu-devel] [PATCH v2 08/11] pci: introduce pci bus pre reset, Cao jin, 2016/03/06
[Qemu-devel] [PATCH v2 11/11] vfio: add 'aer' property to expose aercap, Cao jin, 2016/03/06