[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PULL 6/8] vfio/pci: Split out VGA setup
From: |
Alex Williamson |
Subject: |
[Qemu-devel] [PULL 6/8] vfio/pci: Split out VGA setup |
Date: |
Wed, 09 Mar 2016 12:53:46 -0700 |
User-agent: |
StGit/0.17.1-dirty |
This could be setup later by device specific code, such as IGD
initialization.
Signed-off-by: Alex Williamson <address@hidden>
---
hw/vfio/pci.c | 82 +++++++++++++++++++++++++++++++++------------------------
hw/vfio/pci.h | 2 +
2 files changed, 50 insertions(+), 34 deletions(-)
diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
index ebbc9d6..30eb945 100644
--- a/hw/vfio/pci.c
+++ b/hw/vfio/pci.c
@@ -2054,6 +2054,52 @@ static VFIODeviceOps vfio_pci_ops = {
.vfio_eoi = vfio_intx_eoi,
};
+int vfio_populate_vga(VFIOPCIDevice *vdev)
+{
+ VFIODevice *vbasedev = &vdev->vbasedev;
+ struct vfio_region_info *reg_info;
+ int ret;
+
+ if (vbasedev->num_regions > VFIO_PCI_VGA_REGION_INDEX) {
+ ret = vfio_get_region_info(vbasedev,
+ VFIO_PCI_VGA_REGION_INDEX, ®_info);
+ if (ret) {
+ return ret;
+ }
+
+ if (!(reg_info->flags & VFIO_REGION_INFO_FLAG_READ) ||
+ !(reg_info->flags & VFIO_REGION_INFO_FLAG_WRITE) ||
+ reg_info->size < 0xbffff + 1) {
+ error_report("vfio: Unexpected VGA info, flags 0x%lx, size 0x%lx",
+ (unsigned long)reg_info->flags,
+ (unsigned long)reg_info->size);
+ g_free(reg_info);
+ return -EINVAL;
+ }
+
+ vdev->vga = g_new0(VFIOVGA, 1);
+
+ vdev->vga->fd_offset = reg_info->offset;
+ vdev->vga->fd = vdev->vbasedev.fd;
+
+ g_free(reg_info);
+
+ vdev->vga->region[QEMU_PCI_VGA_MEM].offset = QEMU_PCI_VGA_MEM_BASE;
+ vdev->vga->region[QEMU_PCI_VGA_MEM].nr = QEMU_PCI_VGA_MEM;
+ QLIST_INIT(&vdev->vga->region[QEMU_PCI_VGA_MEM].quirks);
+
+ vdev->vga->region[QEMU_PCI_VGA_IO_LO].offset = QEMU_PCI_VGA_IO_LO_BASE;
+ vdev->vga->region[QEMU_PCI_VGA_IO_LO].nr = QEMU_PCI_VGA_IO_LO;
+ QLIST_INIT(&vdev->vga->region[QEMU_PCI_VGA_IO_LO].quirks);
+
+ vdev->vga->region[QEMU_PCI_VGA_IO_HI].offset = QEMU_PCI_VGA_IO_HI_BASE;
+ vdev->vga->region[QEMU_PCI_VGA_IO_HI].nr = QEMU_PCI_VGA_IO_HI;
+ QLIST_INIT(&vdev->vga->region[QEMU_PCI_VGA_IO_HI].quirks);
+ }
+
+ return 0;
+}
+
static int vfio_populate_device(VFIOPCIDevice *vdev)
{
VFIODevice *vbasedev = &vdev->vbasedev;
@@ -2113,45 +2159,13 @@ static int vfio_populate_device(VFIOPCIDevice *vdev)
g_free(reg_info);
- if ((vdev->features & VFIO_FEATURE_ENABLE_VGA) &&
- vbasedev->num_regions > VFIO_PCI_VGA_REGION_INDEX) {
- ret = vfio_get_region_info(vbasedev,
- VFIO_PCI_VGA_REGION_INDEX, ®_info);
+ if (vdev->features & VFIO_FEATURE_ENABLE_VGA) {
+ ret = vfio_populate_vga(vdev);
if (ret) {
error_report(
"vfio: Device does not support requested feature x-vga");
goto error;
}
-
- if (!(reg_info->flags & VFIO_REGION_INFO_FLAG_READ) ||
- !(reg_info->flags & VFIO_REGION_INFO_FLAG_WRITE) ||
- reg_info->size < 0xbffff + 1) {
- error_report("vfio: Unexpected VGA info, flags 0x%lx, size 0x%lx",
- (unsigned long)reg_info->flags,
- (unsigned long)reg_info->size);
- g_free(reg_info);
- ret = -1;
- goto error;
- }
-
- vdev->vga = g_new0(VFIOVGA, 1);
-
- vdev->vga->fd_offset = reg_info->offset;
- vdev->vga->fd = vdev->vbasedev.fd;
-
- g_free(reg_info);
-
- vdev->vga->region[QEMU_PCI_VGA_MEM].offset = QEMU_PCI_VGA_MEM_BASE;
- vdev->vga->region[QEMU_PCI_VGA_MEM].nr = QEMU_PCI_VGA_MEM;
- QLIST_INIT(&vdev->vga->region[QEMU_PCI_VGA_MEM].quirks);
-
- vdev->vga->region[QEMU_PCI_VGA_IO_LO].offset = QEMU_PCI_VGA_IO_LO_BASE;
- vdev->vga->region[QEMU_PCI_VGA_IO_LO].nr = QEMU_PCI_VGA_IO_LO;
- QLIST_INIT(&vdev->vga->region[QEMU_PCI_VGA_IO_LO].quirks);
-
- vdev->vga->region[QEMU_PCI_VGA_IO_HI].offset = QEMU_PCI_VGA_IO_HI_BASE;
- vdev->vga->region[QEMU_PCI_VGA_IO_HI].nr = QEMU_PCI_VGA_IO_HI;
- QLIST_INIT(&vdev->vga->region[QEMU_PCI_VGA_IO_HI].quirks);
}
irq_info.index = VFIO_PCI_ERR_IRQ_INDEX;
diff --git a/hw/vfio/pci.h b/hw/vfio/pci.h
index b8a7189..3976f68 100644
--- a/hw/vfio/pci.h
+++ b/hw/vfio/pci.h
@@ -157,4 +157,6 @@ void vfio_bar_quirk_exit(VFIOPCIDevice *vdev, int nr);
void vfio_bar_quirk_finalize(VFIOPCIDevice *vdev, int nr);
void vfio_setup_resetfn_quirk(VFIOPCIDevice *vdev);
+int vfio_populate_vga(VFIOPCIDevice *vdev);
+
#endif /* HW_VFIO_VFIO_PCI_H */
- [Qemu-devel] [PULL 0/8] VFIO updates 2016-03-09, Alex Williamson, 2016/03/09
- [Qemu-devel] [PULL 1/8] vfio: Add sysfsdev property for pci & platform, Alex Williamson, 2016/03/09
- [Qemu-devel] [PULL 2/8] vfio: Wrap VFIO_DEVICE_GET_REGION_INFO, Alex Williamson, 2016/03/09
- [Qemu-devel] [PULL 3/8] vfio: Generalize region support, Alex Williamson, 2016/03/09
- [Qemu-devel] [PULL 4/8] vfio/pci: Convert all MemoryRegion to dynamic alloc and consistent functions, Alex Williamson, 2016/03/09
- [Qemu-devel] [PULL 5/8] vfio/pci: Fixup PCI option ROMs, Alex Williamson, 2016/03/09
- [Qemu-devel] [PULL 6/8] vfio/pci: Split out VGA setup,
Alex Williamson <=
- [Qemu-devel] [PULL 7/8] vfio/pci: replace fixed string limit by g_strdup_printf, Alex Williamson, 2016/03/09
- [Qemu-devel] [PULL 8/8] MAINTAINERS: Add entry for the include/hw/vfio/ folder, Alex Williamson, 2016/03/09
- Re: [Qemu-devel] [PULL 0/8] VFIO updates 2016-03-09, Peter Maydell, 2016/03/10