[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v3 16/27] migration: convert RDMA to use QIOChan
From: |
Dr. David Alan Gilbert |
Subject: |
Re: [Qemu-devel] [PATCH v3 16/27] migration: convert RDMA to use QIOChannel interface |
Date: |
Thu, 10 Mar 2016 17:00:20 +0000 |
User-agent: |
Mutt/1.5.24 (2015-08-30) |
* Daniel P. Berrange (address@hidden) wrote:
> This converts the RDMA code to provide a subclass of
> QIOChannel that uses RDMA for the data transport.
>
> This implementation of RDMA does not correctly
> handle non-blocking mode. Reads might block
> if there was not already some pending data
> and writes will block until all data is sent.
> This flawed behaviour was already present in
> the existing impl, so appears to not be a
> critical problem at this time. It should be
> on the list of things to fix in the future
> though.
>
> The RDMA code would be much better off it it could
> be split up in a generic RDMA layer, a QIOChannel
> impl based on RMDA, and then the RMDA migration
> glue. This is left as a future exercise for the brave.
>
> Signed-off-by: Daniel P. Berrange <address@hidden>
Reviewed-by: Dr. David Alan Gilbert <address@hidden>
(I don't know that much about the GSource stuff, but it looks
consistent)
> +static gboolean
> +qio_channel_rdma_source_prepare(GSource *source,
> + gint *timeout)
> +{
> + QIOChannelRDMASource *rsource = (QIOChannelRDMASource *)source;
> + RDMAContext *rdma = rsource->rioc->rdma;
> + GIOCondition cond = 0;
> + *timeout = -1;
> +
> + if (rdma->wr_data[0].control_len) {
> + cond |= G_IO_IN;
> + }
> + cond |= G_IO_OUT;
> +
> + return cond & rsource->condition;
> +}
I guess you could make that:
*timeout = -1;
return qio_channel_rdma_source_check(source);
Dave
> +static gboolean
> +qio_channel_rdma_source_check(GSource *source)
> +{
> + QIOChannelRDMASource *rsource = (QIOChannelRDMASource *)source;
> + RDMAContext *rdma = rsource->rioc->rdma;
> + GIOCondition cond = 0;
> +
> + if (rdma->wr_data[0].control_len) {
> + cond |= G_IO_IN;
> + }
> + cond |= G_IO_OUT;
> +
> + return cond & rsource->condition;
> +}
> +
> +static gboolean
> +qio_channel_rdma_source_dispatch(GSource *source,
> + GSourceFunc callback,
> + gpointer user_data)
> +{
> + QIOChannelFunc func = (QIOChannelFunc)callback;
> + QIOChannelRDMASource *rsource = (QIOChannelRDMASource *)source;
> + RDMAContext *rdma = rsource->rioc->rdma;
> + GIOCondition cond = 0;
> +
> + if (rdma->wr_data[0].control_len) {
> + cond |= G_IO_IN;
> + }
> + cond |= G_IO_OUT;
> +
> + return (*func)(QIO_CHANNEL(rsource->rioc),
> + (cond & rsource->condition),
> + user_data);
> +}
> +
> +static void
> +qio_channel_rdma_source_finalize(GSource *source)
> +{
> + QIOChannelRDMASource *ssource = (QIOChannelRDMASource *)source;
> +
> + object_unref(OBJECT(ssource->rioc));
> +}
> +
> +GSourceFuncs qio_channel_rdma_source_funcs = {
> + qio_channel_rdma_source_prepare,
> + qio_channel_rdma_source_check,
> + qio_channel_rdma_source_dispatch,
> + qio_channel_rdma_source_finalize
> +};
> +
> +static GSource *qio_channel_rdma_create_watch(QIOChannel *ioc,
> + GIOCondition condition)
> {
> + QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(ioc);
> + QIOChannelRDMASource *ssource;
> + GSource *source;
> +
> + source = g_source_new(&qio_channel_rdma_source_funcs,
> + sizeof(QIOChannelRDMASource));
> + ssource = (QIOChannelRDMASource *)source;
> +
> + ssource->rioc = rioc;
> + object_ref(OBJECT(rioc));
> +
> + ssource->condition = condition;
> +
> + return source;
> +}
> +
> +
> +static int qio_channel_rdma_close(QIOChannel *ioc,
> + Error **errp)
> +{
> + QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(ioc);
> trace_qemu_rdma_close();
> - QEMUFileRDMA *r = opaque;
> - if (r->rdma) {
> - qemu_rdma_cleanup(r->rdma);
> - g_free(r->rdma);
> + if (rioc->rdma) {
> + qemu_rdma_cleanup(rioc->rdma);
> + g_free(rioc->rdma);
> + rioc->rdma = NULL;
> }
> - g_free(r);
> return 0;
> }
>
> @@ -2694,8 +2850,8 @@ static size_t qemu_rdma_save_page(QEMUFile *f, void
> *opaque,
> ram_addr_t block_offset, ram_addr_t offset,
> size_t size, uint64_t *bytes_sent)
> {
> - QEMUFileRDMA *rfile = opaque;
> - RDMAContext *rdma = rfile->rdma;
> + QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(opaque);
> + RDMAContext *rdma = rioc->rdma;
> int ret;
>
> CHECK_ERROR_STATE();
> @@ -2949,8 +3105,8 @@ static int qemu_rdma_registration_handle(QEMUFile *f,
> void *opaque)
> };
> RDMAControlHeader blocks = { .type = RDMA_CONTROL_RAM_BLOCKS_RESULT,
> .repeat = 1 };
> - QEMUFileRDMA *rfile = opaque;
> - RDMAContext *rdma = rfile->rdma;
> + QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(opaque);
> + RDMAContext *rdma = rioc->rdma;
> RDMALocalBlocks *local = &rdma->local_ram_blocks;
> RDMAControlHeader head;
> RDMARegister *reg, *registers;
> @@ -3205,9 +3361,10 @@ out:
> * We've already built our local RAMBlock list, but not yet sent the list to
> * the source.
> */
> -static int rdma_block_notification_handle(QEMUFileRDMA *rfile, const char
> *name)
> +static int
> +rdma_block_notification_handle(QIOChannelRDMA *rioc, const char *name)
> {
> - RDMAContext *rdma = rfile->rdma;
> + RDMAContext *rdma = rioc->rdma;
> int curr;
> int found = -1;
>
> @@ -3249,8 +3406,8 @@ static int rdma_load_hook(QEMUFile *f, void *opaque,
> uint64_t flags, void *data)
> static int qemu_rdma_registration_start(QEMUFile *f, void *opaque,
> uint64_t flags, void *data)
> {
> - QEMUFileRDMA *rfile = opaque;
> - RDMAContext *rdma = rfile->rdma;
> + QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(opaque);
> + RDMAContext *rdma = rioc->rdma;
>
> CHECK_ERROR_STATE();
>
> @@ -3269,8 +3426,8 @@ static int qemu_rdma_registration_stop(QEMUFile *f,
> void *opaque,
> uint64_t flags, void *data)
> {
> Error *local_err = NULL, **errp = &local_err;
> - QEMUFileRDMA *rfile = opaque;
> - RDMAContext *rdma = rfile->rdma;
> + QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(opaque);
> + RDMAContext *rdma = rioc->rdma;
> RDMAControlHeader head = { .len = 0, .repeat = 1 };
> int ret = 0;
>
> @@ -3366,55 +3523,74 @@ err:
> return ret;
> }
>
> -static int qemu_rdma_get_fd(void *opaque)
> -{
> - QEMUFileRDMA *rfile = opaque;
> - RDMAContext *rdma = rfile->rdma;
> -
> - return rdma->comp_channel->fd;
> -}
> -
> -static const QEMUFileOps rdma_read_ops = {
> - .get_buffer = qemu_rdma_get_buffer,
> - .get_fd = qemu_rdma_get_fd,
> - .close = qemu_rdma_close,
> -};
> -
> static const QEMUFileHooks rdma_read_hooks = {
> .hook_ram_load = rdma_load_hook,
> };
>
> -static const QEMUFileOps rdma_write_ops = {
> - .put_buffer = qemu_rdma_put_buffer,
> - .close = qemu_rdma_close,
> -};
> -
> static const QEMUFileHooks rdma_write_hooks = {
> .before_ram_iterate = qemu_rdma_registration_start,
> .after_ram_iterate = qemu_rdma_registration_stop,
> .save_page = qemu_rdma_save_page,
> };
>
> -static void *qemu_fopen_rdma(RDMAContext *rdma, const char *mode)
> +
> +static void qio_channel_rdma_finalize(Object *obj)
> +{
> + QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(obj);
> + if (rioc->rdma) {
> + qemu_rdma_cleanup(rioc->rdma);
> + g_free(rioc->rdma);
> + rioc->rdma = NULL;
> + }
> +}
> +
> +static void qio_channel_rdma_class_init(ObjectClass *klass,
> + void *class_data G_GNUC_UNUSED)
> +{
> + QIOChannelClass *ioc_klass = QIO_CHANNEL_CLASS(klass);
> +
> + ioc_klass->io_writev = qio_channel_rdma_writev;
> + ioc_klass->io_readv = qio_channel_rdma_readv;
> + ioc_klass->io_set_blocking = qio_channel_rdma_set_blocking;
> + ioc_klass->io_close = qio_channel_rdma_close;
> + ioc_klass->io_create_watch = qio_channel_rdma_create_watch;
> +}
> +
> +static const TypeInfo qio_channel_rdma_info = {
> + .parent = TYPE_QIO_CHANNEL,
> + .name = TYPE_QIO_CHANNEL_RDMA,
> + .instance_size = sizeof(QIOChannelRDMA),
> + .instance_finalize = qio_channel_rdma_finalize,
> + .class_init = qio_channel_rdma_class_init,
> +};
> +
> +static void qio_channel_rdma_register_types(void)
> +{
> + type_register_static(&qio_channel_rdma_info);
> +}
> +
> +type_init(qio_channel_rdma_register_types);
> +
> +static QEMUFile *qemu_fopen_rdma(RDMAContext *rdma, const char *mode)
> {
> - QEMUFileRDMA *r;
> + QIOChannelRDMA *rioc;
>
> if (qemu_file_mode_is_not_valid(mode)) {
> return NULL;
> }
>
> - r = g_new0(QEMUFileRDMA, 1);
> - r->rdma = rdma;
> + rioc = QIO_CHANNEL_RDMA(object_new(TYPE_QIO_CHANNEL_RDMA));
> + rioc->rdma = rdma;
>
> if (mode[0] == 'w') {
> - r->file = qemu_fopen_ops(r, &rdma_write_ops);
> - qemu_file_set_hooks(r->file, &rdma_write_hooks);
> + rioc->file = qemu_fopen_channel_output(QIO_CHANNEL(rioc));
> + qemu_file_set_hooks(rioc->file, &rdma_write_hooks);
> } else {
> - r->file = qemu_fopen_ops(r, &rdma_read_ops);
> - qemu_file_set_hooks(r->file, &rdma_read_hooks);
> + rioc->file = qemu_fopen_channel_input(QIO_CHANNEL(rioc));
> + qemu_file_set_hooks(rioc->file, &rdma_read_hooks);
> }
>
> - return r->file;
> + return rioc->file;
> }
>
> static void rdma_accept_incoming_migration(void *opaque)
> --
> 2.5.0
>
--
Dr. David Alan Gilbert / address@hidden / Manchester, UK
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Re: [Qemu-devel] [PATCH v3 16/27] migration: convert RDMA to use QIOChannel interface,
Dr. David Alan Gilbert <=